Workshop safety education content: 1. Seriously abide by the safety operation procedures. The first thing that new workers should remember is to abide by the safety and health regulations in the workplace. Many safety regulations are summarized from the experience of previous accidents and injuries, and we should strictly abide by them. Any operation must have a correct procedure, which is a way to make the operation "smooth", "safe" and "easy". Therefore, if the procedures are not followed, accidents and injuries may be caused. Some people think that "just do it in your own way" and "it's too much trouble" should be done according to procedures, but "haste makes waste" can only be guaranteed if the operating rules are faithfully observed. 2, pre-job safety forecast in advance. Make clear the matters needing attention in the work before taking up the post, and actively ask questions if they are unclear until they are clear. Do you want to check the scope of work for safety problems? Is there any danger of slipping and falling? Are the tools used and used damaged? Are there any abnormalities in materials and machinery used? At work, you should always think about "what is the danger of the next operation" and "how to avoid this danger". It is forbidden to enter the dangerous area at will and tamper with the valves and electrical switches. 3. Safety knowledge. Pits, ditches and pools that need to be set for production should have fences or cover plates. The stacking of raw materials, finished products and semi-finished products should not hinder the operation and passage, and the waste should be removed in time. The workplace should be kept clean and tidy. Fireworks should be strictly prohibited in places where inflammable and explosive articles are scattered. For workers working in inflammable, explosive, burning and static places, it is forbidden to distribute and use chemical fiber protective clothing and supplies.