Sparks appeared in the power distribution cabinet, and the aging of the power cord of electrical equipment produced sparks. Employees deliberately played with fire without observing the rules and regulations, and personnel failed to find out in time, which led to a fire. And other aspects of the fire.
Second, the planning
After the accident, the first person and the monitoring safety officer report to the department head, the monitoring room and the fire control room respectively, and the monitoring safety officer reports the site situation to the fire control room through the intercom. After receiving the alarm, the leaders of the office building quickly started the on-site disposal plan and set up the first aid group and the alarm group. First aid group: go to the fire control room to disarm the protective equipment; Assign personnel to give first aid to the injured and then let the injured leave the scene. Alarm group: alarm to safety supervisor, general manager, department supervisor and manager; Call the heads of police stations.
After receiving the alarm, the monitoring room will give an alarm to the fire control room through the intercom again, and adjust the monitoring at the same time to closely observe the site situation; After receiving the alarm, the fire control room immediately informed the chief commander and started the fire pump to make the water pressure reach the best state. After the general commander confirmed the reply, he started the factory alarm and the office building safety accident plan was officially launched.
After the plan was launched, the on-site command group quickly rushed to the emergency assembly point to take charge of the on-site emergency command, and the on-site personnel quickly set up various rescue teams to carry out rescue.
Command group: responsible for executing all rescue instructions issued by the command group and reporting the site situation in time.
First aid group: go to the fire control room to disarm the protective equipment; Quickly move the main information of financial accounts and other departments away from the scene of the accident; Assign personnel to give first aid to the injured and then let the injured leave the scene.
Alarm group: responsible for alarm to fire control institutions and medical institutions in Heze City; Send someone to the door of the company to meet the rescue.
Alert group: responsible for the alert around the office building and all important intersections; Stop people from entering.
Logistics support group: looking for emergency materials such as medicines and water; Cut off the nearby power supply; Ensure the vehicles transporting the wounded.
Evacuation group: organize all office employees to evacuate the dangerous area according to the evacuation route.
As time went on, members of the company's evacuation team kept moving trapped people to safety. The medical staff gave first aid to the wounded and took them to the hospital. The counting of all personnel will not end until all personnel are moved to a safe place.
Precautions:
1. The corresponding intercom channels held by the participants are as follows:
The first aid group is the "1" channel; The logistics support group is the "2" channel; The telephone number of the alarm group is "3" channel; The evacuation team is on Channel 4.
2. The red armband is the symbol of each group leader;
3, the fire brigade unified call:
Unified ambulance telephone number: (Pok Oi Hospital), (Huici Hospital)
Basic first aid knowledge:
1, the alarm personnel shall report the following contents:
(1) The location of the accident;
(2) the spread of accidents;
③ Time of the accident;
(4) casualties;
⑤ Location of the company, contact information of alarm personnel, etc.
2. What the first aid team should know.
① Correct use of emergency materials and articles (smoke masks, etc.). );
② On-site rescue knowledge;
(3) Important information.
3. The evacuation team should understand the contents of the meeting, lead employees at all levels to evacuate to safe places respectively, and constantly evacuate people by calling for help and shouting.
4. The alert group should understand the contents of the meeting, prevent irrelevant personnel from entering the alert area, ensure the smooth evacuation passage, and be responsible for directing and transferring relevant relief materials.
5, logistics support group should know the content.
Familiar with the location and use of emergency tools and standby tools, the control of fire pump room, the control of power supply and electricity consumption in the factory, etc.
Emergency Plan 2 for Public Safety Emergencies in Office Buildings This plan is formulated to effectively prevent, control and eliminate the hazards caused by safety emergencies such as fire in comprehensive office buildings, ensure the safety of life and property of office workers in comprehensive office buildings and maintain normal working order.
First, strengthen leadership and set up fire prevention headquarters.
The Bureau of Government Affairs has set up a fire prevention headquarters, which consists of a fire action group, a communication liaison group, an evacuation guidance group and a safety protection and rescue group, and is responsible for leading and handling emergencies in this plan;
Commander in Chief: Liu
Deputy Commander: Li Wei.
Member: heads of departments
Fire action group: led by the fire chief, including all members of the fire department and maintenance personnel, mainly responsible for the general primary fire protection in this building.
Communication and liaison group: headed by the director of the office, with all the staff in the office as members, mainly responsible for the communication and unified coordination of various departments.
Evacuation guidance group: headed by the Minister of Organization and Personnel Department, with all personnel of Organization and Personnel Department as members, mainly responsible for the safe evacuation of personnel and the safe transfer of property in case of fire.
Safety protection and rescue team: headed by the heads of the maintenance department and the living department, with all the staff of each department as members, mainly responsible for logistics support such as vehicles and medical rescue in case of fire.
1. The headquarters should lead each team to master the contradictions and problems in fire safety work, and find and rectify them in time.
2, strengthen the publicity and training of multi-unit fire safety, improve the fire awareness of employees, so that everyone knows fire protection and everyone attaches importance to fire protection.
3. Organize personnel to regularly check and maintain fire-fighting equipment, replace unqualified equipment in time, replace fire extinguishers with fire extinguishing agents in time, and repair and rescue equipment should be in a good standby state. Fire prevention and extinguishing should be based on scientific technical support conditions, and accidents should be eliminated in the bud.
Second, the automatic fire alarm system fire alarm signal processing program
1. When the personnel on duty in the fire control room receive the fire alarm signal from the automatic fire alarm system, they should immediately notify it by wireless intercom or telephone of their own unit, and the inspectors or personnel on duty in the alarm area should quickly arrive at the scene for inspection.
2. After the inspectors confirm the fire, they should immediately report the correct position and fire to the fire control room through the alarm button, floor phone or wireless intercom. In case of initial fire, immediately organize personnel from all departments around the building to form the first fire fighting team within 30 seconds, and use fire extinguishers and fire hydrants to put out the fire. At the same time, report to the leaders in charge and immediately organize the second fire brigade to reinforce.
3. If the fire is serious and tends to spread, immediately call "1 19" for help, and put down the fire curtain to isolate the fire source, prevent smoke and harmful gases from spreading, and reduce the fire source area. When the firemen arrive, the temporary commander should report the situation of the fire scene to the firemen, obey the unified command of the firemen, and cooperate with the fire brigade to do a good job in fire fighting and evacuation.
4. If a fire is found at night, immediately contact the person in charge of the fire department, management personnel and maintenance personnel, report to the leaders in charge at the same time, organize the fire-fighting team to put out the fire urgently, and dial "1 19" according to the fire. The mobile phones of all staff in the fire department are turned on 24 hours a day.
5. After the fire, master the principle of "three closeness": firefighters or office workers near the fire point use fire extinguishers and hydrants to put out the fire; Firefighters or agency staff near the telephone or alarm point are responsible for the alarm; Firefighters or agency staff near the safe passage or exit guide personnel to evacuate.
6. After confirming the fire report, the personnel on duty in the fire control room should do the following work at the same time:
(1), immediately start the accident broadcast and issue a fire alarm command, and at the same time tell all the staff not to panic and evacuate to the safe area-People's Square quickly and safely under the guidance of firefighters.
The best evacuation route: the personnel in the west building of Area A leave from the west gate on the first basement and arrive at People's Square through the west gate in front of the building; The personnel in the East Building of Area C exit from the east gate on the ground floor and arrive at People's Square through the east gate in front of the building; People between area B and area C walk through the middle gate and arrive at People's Square through the main entrance; People between Area A and Area B go to the north gate on the first floor, and after leaving the north gate, they arrive at People's Square along Fuan Lane and Fu You Lane respectively. Dining halls and personnel on the basement level and below are evacuated from the nearest building through the east-west security door on the basement level, and then leave the east-west gate in front of the building through the roads on both sides of the building to reach the People's Square.
(2), immediately start the positive pressure air supply, exhaust system and fire pump and other facilities, to ensure the safe evacuation of personnel and effectively put out the initial fire.
(3), immediately notify the maintenance department, arrange electrician, elevator maintenance man according to the fire situation, shut down the elevator.
(4) After receiving the fire alarm instruction from the fire control room, each team should be "quick response, full mobilization, responsibility at different levels, key control, strategic guidance, coordinated operation and decisive disposal" according to the division of responsibilities.
Three, the unit staff found that the fire disposal procedures
1. When the firemen of this unit confirm the fire alarm, they should immediately call the fire control room through the alarm button or telephone, and the evacuation guidance group should guide the personnel of this floor to evacuate in time; The fire action team put out the fire; The alarm telephone number of the communication contact group is "1 19".
2. After receiving the fire report, the personnel in the fire control room shall follow Item 6 of Article 2 of the Fire Alarm Signal Processing Procedure for Automatic Fire Alarm System.
3. After receiving the fire alarm instruction from the fire control room, the personnel of the second echelon shall follow the provisions in Part (4) of Item 6 of Article 2 of the Processing Procedure for Fire Alarm Signals of Automatic Fire Alarm System.
Four, after receiving the non fire emergency disposal.
1, take immediate action according to the division of labor of fire personnel to prevent fire caused by unexpected events.
2. The fire control room will immediately start the accident broadcast after receiving the emergency, and notify all personnel to evacuate to the People's Square in an orderly manner under the guidance of security personnel.
Verb (abbreviation for verb) clean up the mess
1, confirmed by the fire fighting action group that the open flame has been extinguished, assisted the leaders and relevant departments in conducting a general survey of the losses caused by the fire, drafted an accident safety report and reported it to the fire prevention headquarters.
2, assist the fire command to find out the cause of the accident, shall be investigated for responsibility for the accident.
Emergency plan for public safety emergencies in office building 3 In order to strengthen fire safety management, prevent and reduce the occurrence of fire accidents, ensure the safety of cadres, workers and property, and maintain normal work and life order, this plan is formulated in accordance with the Fire Protection Law of People's Republic of China (PRC) and the Regulations of the Ministry of Public Security on Fire Safety Management of Organs, Organizations, Enterprises and Institutions, and in combination with the actual situation of our bureau.
I. Organizational structure
In order to ensure the smooth and safe implementation of the fire safety emergency plan of our bureau, the headquarters, fire fighting action group, communication contact group, evacuation guidance group, protection and rescue group and logistics support group were established.
(1) Headquarters
Commander in chief:
Responsibilities: Be fully responsible for the implementation and command of office building safety emergency plan.
On-site command:
Responsibilities: Under the leadership of the commander-in-chief, be responsible for directing the concrete implementation of on-site fire fighting and evacuation, and ensuring that the fire fighting and evacuation work goes smoothly as planned.
The members of the headquarters are the heads of all units and rooms.
(2) Fire Fighting Action Team
Team leader:
Members:
Responsibilities: According to the emergency plan or the instructions of the on-site commander, be responsible for putting out the initial fire, preventing the fire from spreading, and cooperating with the professional fire brigade for fire fighting and rescue.
(3) Communication Liaison Group
Team leader:
Members: All employees in the office.
Responsibilities: Call the police in time, keep the communication smooth, and ensure that all instructions can be conveyed quickly, timely and accurately.
(4) Evacuation Steering Group
Team leader:
Members: All staff of People's Education Unit and Finance Unit.
Responsibilities: Mainly responsible for evacuating people from the fire site to a safe place, guiding fire engines and firefighters into the fire site, being responsible for on-site vigilance, maintaining order at the scene, guarding relief materials and ensuring the smooth fire fighting operation.
(5) Protection and rescue team
Team leader:
Members: all staff of legal affairs unit, supervision office and private associations.
Responsibilities: Responsible for rescuing the injured, and cooperate with full-time firefighters and medical staff to rescue the wounded trapped in the fire.
(6) Logistics Support Group
Team leader:
Members: All employees in the office.
Responsibilities: Responsible for ensuring the supply of fire-fighting water and other fire-fighting materials and facilities, as well as the connection between water, electricity, on-site emergency repair and recovery after fire fighting.
Second, the disposal procedures
(1) Emergency procedures and measures for receiving alarm.
1. After discovering the fire, the staff should immediately find out the fire place and location, and notify the office staff to rush to the scene for confirmation. After confirmation, they should immediately call "1 19" to explain the fire location, fire location and materials, fire size and trapped people. At the same time, report to the head of the office step by step until the commander in chief.
2. After the fire broke out, the personnel in the building should immediately take emergency measures, count the floor personnel to evacuate safely, cut off the power supply and fire source related to the fire, and move explosives.
3. Notify the communication liaison group at the same time when giving an alarm, and take timely measures to coordinate the actions of each group.
(2) Emergency procedures and measures of the headquarters
1. After receiving the notice, the headquarters personnel shall gather at the designated place of the on-site headquarters.
2. Assemble the fire fighting action group, control the fire point, eliminate the fire and prevent the fire from spreading.
3. Give instructions to guide the personnel in the building, and inform the evacuation guidance group to work at the site by mobile phone or telephone according to the fire situation at the site.
4. Give instructions to each group.
(3) Fire emergency procedures and measures
1, unit leaders and volunteer firefighters in the fire-fighting area should immediately use fire extinguishers and hydrants to put out the initial fire.
2, fire action group members after receiving the alarm, should immediately rushed to the scene of the fire.
3, according to the plan or the commander's instructions, quickly check whether the fire scene to cut off the power supply and fire source, check whether there are inflammable and explosive articles, enable to carry or use fire extinguishers, fire hydrants and other fire-fighting equipment nearby to put out the fire (electrical appliances, microcomputers, etc. should use carbon dioxide fire extinguishers to put out the fire).
4. If the fire is large and cannot be put out temporarily, measures such as cooling and isolation should be taken in time according to the site conditions to prevent the fire from spreading further, and the fire brigade should be present to cooperate with the completion of the fire fighting task.
5. When isolation measures are taken, the relevant personnel of the adjacent units in the fire-fighting area shall, according to the unified command, move the flammable items to a safe place in time.
(four) evacuation guidance procedures and measures
1. After receiving the alarm, the evacuation guidance group immediately rushed to the fire site to organize evacuation.
2. Inform the people who need to be evacuated according to the fire.
3, according to the plan or the commander's instructions, dredge the emergency evacuation channel, first evacuate the site personnel, and then evacuate dangerous goods and other materials.
4, send personnel responsible for guiding fire engines and firefighters into the scene of the fire.
5, send personnel to be responsible for the fire scene alert, maintain order at the scene.
(5) Communication emergency procedures and measures
1. The communication liaison group shall keep the communication unblocked, and upload and release various instructions, situations and information timely and accurately.
2. The members of the communication liaison group shall convey fire information and orders to the headquarters at any time.
(six) emergency procedures and measures for protection and rescue.
1, the protection and rescue team should guard the building, ensure the smooth running of fire engines, prevent irrelevant personnel from entering the scene and maintain the order at the scene.
2. Rescue the injured in time.
3. The seriously injured person should call the emergency number "120" in time.
4. Help the evacuees to leave the building and make arrangements.
5. Cooperate with full-time firefighters and medical personnel to rescue the wounded and important materials trapped in the fire.
6, after the fire, keep the original state of the scene, cooperate with investigators to do a good job of accident scene investigation.
(seven) emergency procedures and measures for logistics support.
1, the logistics support team should quickly mobilize and transport materials and equipment needed for fire fighting, and provide necessary support and guarantee for completing fire fighting, evacuation and rescue tasks. When the smoke in the fire area is heavy, wet towels should be provided to the fire-fighting and rescue personnel.
2, to ensure the normal operation of fire control facilities, timely troubleshooting of fire control facilities.
3, after the fire broke out, the logistics support group under the arrangement of the headquarters to do a good job in the aftermath.
Three. Emergency countermeasures and requirements
1. When building workers find a sudden fire, they should first keep calm, recognize the direction of the fire and judge the location of the nearest safety exit. They can use fire extinguishers as much as possible to put out the fire, control the fire and ensure the smooth escape route.
2. If there is a fire outside the corridor or room and you encounter an opaque door, you should first touch the metal part of the door carefully. Once you have a fever, don't open the door and take another exit. If the fire is too big to escape, you can go back indoors and hide in a room with good heat insulation. Close doors and windows, block doors and other ventilated places with cotton cloth soaked in water, and contact the outside world for help in time.
If there is smoke in the passage of the room, please cover your nose and mouth with a wet cloth or towel and crawl forward. Don't panic or jump to escape.
4. In emergency rescue and fire fighting, the staff in the building should play an active role and do a good job in coordination with fire fighting and evacuation.
5, all combatants should obey the unified command of the headquarters, after receiving the order to quickly arrive at the designated place.
6, team members to Qi Xin, in an emergency to complete the * * * task.
Fourth, others.
1, planned implementation. All the staff of the organ should seriously study this plan and be familiar with their respective responsibilities and tasks.
2. The plan has started. When a fire breaks out, the bureau office and other relevant departments should immediately organize fire fighting and do their best to eliminate the fire in the early stage. If the fire is out of control, start the plan immediately.
Emergency plan for public safety emergencies in office building 4 This plan is formulated to further consolidate and strengthen xxxx fire safety management, implement various fire safety management responsibilities, improve the fire quality of employees, effectively prevent and reduce the occurrence of fire hazards, ensure the personal safety of employees and the safety of public property, and enhance the ability to resist fires.
I. Organizational structure and responsibilities
(a) fire fighting and emergency evacuation leading group
Team leader: xxx
Deputy leader: xxx
Team member: xxx
Responsibilities of the Leading Group for Fire Fighting and Emergency Evacuation:
Team leader: Be fully responsible for the command and coordination of xxxx fire safety, study and formulate the central fire fighting and emergency evacuation plan, and direct and organize the fire fighting, evacuation and emergency rescue work.
Deputy Team Leader: Assist the team leader to do a good job in fire safety, often organize personnel to conduct fire safety inspections, and report major fire hazards to the team leader. When the team leader is on duty, he is fully responsible for the command and coordination of fire safety.
Responsibilities of team members: According to the arrangement of the team leader and deputy team leader, quickly carry out their respective tasks and report to the leaders for instructions in time.
(2) Emergency Evacuation Steering Group
1. Responsible for directing the staff to evacuate from the safe passage from the east and west sides of the fourth floor and the studio and editing room in the communication building to ensure the smooth passage.
2. Command the staff to evacuate from the safe passage on the east and west sides of the third floor to ensure the smooth passage.
3. Command employees to evacuate from the safe passage on the east and west sides of the second floor to ensure the safe passage is smooth.
4. Command the staff to evacuate from the east and west sides of the first floor, the factory building of Shanshan Printing Factory and the front and rear doors of Hami Factory to ensure the safe passage is smooth.
5. Command the staff to evacuate from the east and west sides of the third floor and the safe passage of the broadcasting room of the communication building to ensure the smooth passage.
6. Command employees to evacuate from the safe passage of the office of the headquarters building to ensure the safe passage is smooth.
7. Be responsible for directing and guiding the evacuation of personnel from various departments and floors at Shanshan site.
Evacuation principle: according to the principle of convenience nearby, organize personnel to evacuate quickly from evacuation passages and safety exits.
(3) Fire Fighting Action Team
Responsibilities: Use on-site fire-fighting equipment to put out the initial fire, command the on-site personnel to evacuate quickly, and protect the site after fire fighting.
(4) Communication Liaison Group
Responsibilities: Responsible for the transmission of emergency information, timely convey various instructions and feed back the field information.
(5) Emergency rescue team
Responsibilities: Be responsible for the rescue of casualties at the scene of the accident in case of emergency, call the emergency number 120 in time, and contact the medical staff to rush to the scene for rescue.
Second, emergency response and evacuation measures
(1) Alarm and alarm disposal
In case of fire or danger, the witnesses at the scene should shout "Fire-fighting" loudly, take fire-fighting measures immediately, and give an alarm to the center leader or safety management department and "1 19". After receiving the alarm, the Security Department will inform all action teams to immediately start the "xxxx Office Building Fire Fighting and Emergency Evacuation Plan", and all action teams will perform their duties according to their respective posts.
(2) Organize emergency evacuation
In case of fire or danger, the evacuation guidance group should evacuate the scene according to their respective posts and the commander should follow the designated evacuation route. Evacuees should obey the instructions of the guiding personnel to prevent congestion and blocking the passage. (Close the office door when evacuating)
(3) Fire Fighting Action Team (fighting initial fire)
In case of fire or danger, the fire action group shall immediately organize personnel to use on-site fire fighting equipment to put out the initial fire or eliminate the danger.
(4) Communication Liaison Group
In case of fire or dangerous situation, the communication liaison group should ensure smooth communication, do a good job in information transmission, timely convey various instructions and feed back on-site information, give an alarm to "1 19" in time, and send personnel to the unit T-junction and other fire-fighting vehicles.
(5) Safety protection and rescue team
In case of fire or danger, the safety protection and rescue team should organize personnel to rescue the casualties at the scene of the accident, call the emergency number 120 in time, and contact the medical staff to rush to the scene for rescue.
Third, how to call the fire alarm.
(a) the name and detailed address of the fire unit.
(2) explain the location of the fire, the burning materials and the size of the fire.
(3) the name and telephone number of the alarm person.
(four) send someone to the door or intersection of the unit to pick up the fire truck.
Fourth, matters needing attention
When the fire department puts out the fire or eliminates the danger, the staff and on-site personnel should cooperate and support vigorously. After the rescue work, the site should be protected, and the fire fighting and emergency team leader should organize the site personnel to clean up the hidden dangers of fire accidents to prevent the fire or dangerous situation from happening again.
Five, fire management
The safety management department shall organize regular inspections by members of the safety network; Whether the safe passage is clear; Whether the alarm device and fire extinguisher are in good condition and effective; Whether the fire safety responsibility is implemented step by step; Whether the personnel in key positions have been trained.
1. Responsible for the inspection of fire-fighting equipment on the fourth, third and second floors, mainly responsible for the safety patrol inspection on the fourth and second floors.
2. Be responsible for the inspection of fire fighting equipment on the first floor, focusing on the safety patrol inspection on the first floor.
3. Responsible for the inspection of fire fighting equipment in the material warehouse and workshop of Shanshan Printing Factory, focusing on the safety of the material warehouse, tape library and workshop.
Sixth, the emergency telephone number
Fire alarm telephone number: 1 19
Emergency center: 120
Comprehensive office: xxxxxxx
Emergency plan for public safety emergencies in office buildings 5 I. Purpose
In order to prevent unnecessary losses caused by power outage, ensure the normal business of all merchants and the normal work of staff in the building, this power outage plan is specially formulated.
Two. member
Team leader: customer service department of the project manager: inform and explain the warranty and recovery of equipment to the merchants; Engineering patrol: patrol the posts in the internal security building.
Third, the principle:
All employees obey the unified scheduling and arrangement of the general manager.
Fourth, the implementation method
1, notify the power failure.
(1) After receiving the power outage notice from the power supply bureau, after the second verification is correct, the merchant and the business department will be notified as soon as possible in the form of a notice, informing the reason, time and recovery time of the power outage.
(2) The project department should protect the facilities and equipment in the building before the power failure, such as stopping the elevator in advance before the power failure.
(3) Before the power failure, check whether the power supply equipment in the transformer room is running normally, and ensure that it can be put into normal operation after power supply is restored.
(4) After receiving the power supply bureau or knowing that the power supply has been restored, inform the merchant that the power supply has been restored at the first time. Please check the equipment, then resume the elevator operation, and patrol the distribution room to see if the data is normal.
2. Emergency power failure
(1) After the power outage, get the power outage information from the power supply bureau as soon as possible, check whether the elevator is trapped, and inform the merchant of the power outage reason and the approximate recovery time.
(2) Assign special personnel to patrol the power supply equipment to prevent unnecessary losses caused by sudden restoration of power supply.
(3) After the power supply is restored, notify the merchants in time after the second confirmation by the power supply bureau to check whether the equipment in the building is back to normal.