Safety work is a very important part of an enterprise, which is related to the development of the whole company. The following is the selected model essay of Workshop Safety Work Summary that I brought to you, hoping to help you!

Fan safety production work summary.

In order to carry out the company's learning spirit, I recently studied the national safety production law seriously and systematically, which made me further realize the great significance of safety production. The following is my personal experience.

The new law put forward the concept of "people-oriented, safe development" for the first time. Safety is an insurmountable red line, that is, we must stick to the red line of "development must not be at the expense of human life", firmly establish the concept of people-oriented and life-first, and correctly handle the problem of "protecting property" or "protecting life" in emergency rescue of major dangers and accidents, so production must be safe and safe before production can be carried out.

In order to promote and realize this concept, the new law has been strengthened from two aspects: first, the responsibilities of all aspects and personnel in safety production management have been clarified, including the responsibilities of production and business units and their main responsible persons, safety management institutions and safety management personnel, the responsibilities of governments at all levels and departments responsible for safety management, the responsibilities of trade unions and intermediary institutions; The second is to increase penalties for illegal units and personnel. After studying the new law, I found that defining responsibility, implementing responsibility and investigating responsibility are the main concerns of the new law. The responsibility system of the new law is to "strengthen and implement the main responsibility of production and business units, and establish a mechanism for production and business units to be responsible, employees to participate, government supervision, industry self-discipline and social supervision."

To implement the main responsibility of production and business units, we must adhere to the management policy of "safety first, prevention first and comprehensive management". Safety first means that "safety" is the premise of production, and there is no production without safety; Therefore, we should give priority to prevention, including eliminating hidden dangers of accidents and emergency rescue; To achieve the above requirements, comprehensive management is needed, including the management and supervision of enterprises by the government and society, the safety management and supervision of various functions and levels within enterprises, and the systematic management of the three elements of human, machine and environmental production from a technical point of view. The main responsibility of an enterprise is embodied in the system, norms, measures, implementation procedures, inspections and the implementation of responsibilities.

For safety managers, what I am most concerned about is that the new law has established a registered safety engineer system. Dangerous goods production and storage units, mines and metal smelting units shall have registered safety engineers to engage in safety production management, and encourage other production and business units to employ registered safety engineers to engage in safety production management. This shows that the country pays more and more attention to safety production, and safety production needs more professional and professional teams to manage it. This requires us to change the concept of safety management now, from unplanned, aimless and extensive safety management to planned, purposeful and refined safety management, and seriously study safety production technology, safety production related laws and regulations and advanced safety management technology to be a qualified safety person.

Summary of Fan Wener's Work of Safety in Production

The year in which the annual work of the production department was summarized passed in a hurry. Looking back on the past year, I can't help but feel deeply. This year, although there was no vigorous result, it also experienced extraordinary tests and tempering. On the occasion of bidding farewell to the old and welcoming the new, our production department will make a detailed summary of the work and gains and losses of the past year and pray that our company will be better next year.

I. Production and output

In the past year, the production department shouldered the heavy responsibility and carried out a large number of process exploration experiments. In stamping, the difficulties such as poor shape of raw materials, greatly improved customer quality standards, delayed arrival of raw materials and temporary adjustment of customer orders have been overcome. , so that our company's product production has achieved a successful transition from single product to synchronous production in previous years. Successfully completed _ _ tons and _ _ tons. Heat treatment: According to the customer's requirements, timely refer to the relevant experience of the same industry manufacturers, and boldly improve the traditional annealing process of our company. After a period of experiments, some high-efficiency materials that have just come into contact have been treated, and the products basically meet the requirements of customers.

Second, product quality.

While completing the above output, our manufacturing department also attaches great importance to product quality, strictly controls every quality link in the production process, and instills quality concepts into operators in time by means of regular meetings, quality meetings, pre-shift meetings, production processes, etc., and insists that operators are the first quality inspectors. According to the turnover of operators, arrange basic theoretical training and on-site operation practice for new employees in time to ensure that every new operator can understand the basic product quality discrimination method before operating independently on the computer. According to the classification characteristics and quality requirements of products, we arrange a part-time staff in the production department. We always believe that product quality is produced. As long as every employee in the production department has a high sense of quality and puts himself into every link of production and operation, the product quality will be steadily improved to meet the quality requirements of customers.

Third, equipment mold management.

In these 20__ years, the company invested money to purchase more sophisticated molds and equipment, which provided a stronger guarantee for the output and quality of products, although most of the equipment was new and the failure rate was low. However, our equipment maintenance personnel overcame the difficulty of weak technical force, carried out regular maintenance of the equipment according to the relevant documents of equipment maintenance, and made corresponding records, detailed equipment checklist and mold maintenance records, and established detailed files for each set of molds, effectively ensuring the normal operation of the equipment and further ensuring the stability of production and operation to a great extent.

Fourth, personnel management.

Due to the sharp increase of production tasks and the diversification of product models, the company recruited a large number of new employees. * * * There are many batches of new employees entering various production positions in the workshop, and the turnover of personnel is very large, which brings great pressure to the management of all aspects of production. Under such pressure, under the correct guidance of the foreman and leaders at all levels, the production department firmly conducts simple pre-job training for each position to ensure that new employees can smoothly enter the post role.

Summary of Work Safety Fan Wensan

Over the past 20__ years, under the correct leadership of the company, closely around the company's overall work ideas and priorities, we have continuously improved the level of engineering supervision and put an end to major safety accidents. Taking the company's quality goal as the work goal, in line with the enterprise spirit of strict supervision, enthusiastic service, law-abiding justice and scientific integrity, after one year's efforts, I basically achieved this year's work goal. As a member of the supervision company, we will report our work and study this year to the leaders as follows:

I. Summary of field work

1. Master the engineering design drawings in the process of the project, find out the difficulties in quality control, determine the control objectives, and consult the construction specifications and quality inspection standards of various disciplines in this project to meet the needs of this project. Review the qualification and scheme of professional construction units entering the site.

2. Pay attention to the inspection and acceptance of materials and components in the site, and require the construction unit to attach the factory certificate to the materials in the site, and report to the supervision department in time for appearance inspection and quality certificate review of the materials in the site, and sign the materials for approval. The contractor is required to immediately remove unqualified materials from the site and shall not use them. At the same time, in the process of supervision, the materials used are tracked and supervised to prevent the contractor from shoddy and stealing the column when using materials.

3. Conduct on-site supervision on concealed works and key parts, and require supervisors to make on-site supervision records. Strict requirements are put forward for the construction inspection procedures of contractors' sub-items, so as to avoid the disconnection between engineering entities and data and ensure the synchronization of construction progress and data. For the quality, safety and progress problems existing in the construction process, oral communication should be conducted first, then written inquiry and tracking should be conducted, and finally a special meeting should be held to solve them. Organize special meetings on professional quality, safety and progress, and coordinate relevant personnel on site to conduct safety inspection on the construction site every week.

4. Work closely with the construction unit, review the construction progress plan prepared by the construction unit in advance, and put forward opinions on the unreasonable process arrangement of the construction unit after consulting with the owner and obtaining the consent, and ask it to make reasonable adjustments to make the progress plan meet the actual engineering needs. Before the acceptance of each type of work by our supervision department and the owner, we must make a good example room, which can be spread out in a large area and form a written record at the same time. In the process of construction, we should be aware of the completion of each single project, and each project should be reported to the owner for confirmation in time.

Second, the shortcomings and suggestions

1. In the process of work, I found that my professional level, professional skills and knowledge are limited. For example, a, the boundaries between some details acceptance specifications and mandatory provisions are not clear; B, at work, there are many verbal instructions to the construction unit; C, insufficient communication with the construction party, etc. As a result, the supervision work is very passive. In the future work, the control of project progress should also start from the implementation scenario to avoid the disconnection between the progress and the entity. At the same time, we should strengthen the study and accumulation of our own professional knowledge of safety production management to meet the needs of safety production.

2. It is suggested that the company can organize more experienced professionals to train our supervisors at an appropriate time to improve their professional level.

Third, the next work plan and experience

As a supervision engineer, I haven't been an engineer for a long time, and there are still many shortcomings in my work. In the future, I will be more strict with myself, study my business hard, constantly update and supplement new knowledge, improve my business level and work ability, sum up my experience and better complete the supervision work.

Summary of Fan Siwen's Work Safety in Production

According to the requirements of the Safety Committee Office of Guodian Changyuan Power Generation Co., Ltd. on carrying out the activities of "Safe Production Month" in 20__ years, and in combination with the actual situation of our project department, we drafted and issued the Notice on Carrying out the Activities of "Safe Production Month" in 20__ years, and made specific arrangements for the activities. Safety month activities are summarized as follows:

First, leaders attach importance to it and organizational measures are in place.

In order to strengthen the organization and leadership of this safety month activity and ensure its effective implementation, the deputy manager in charge of safety in the project department is responsible for the organization and implementation of this safety month activity. In order to improve the management's understanding of safety month activities, at the regular safety meeting, the management leaders and safety officers of the construction department were organized to study and carry out a special mobilization meeting with the theme of "abiding by the rules and laws and caring for life".

The manager of the project department gave strong financial support to the safety month activities, and allocated the publicity expenses during the safety month for many times, and successively produced three sets of theme banners (lobby, water treatment department, steel mill; Two sets of big banner slogans (dumper room, chemical water office) and several small slogans are all at the construction site; A safety signature leaflet with two warning words decided to spend 1000 yuan per month to select the winner of the safe mobile red flag.

Second, carry out various forms of publicity and education activities.

During the activity, a variety of safety publicity and education activities were carried out, such as signing safety warning words, organizing employees to participate in the safety month education examination, participating in the Jincheng Coal Industry Cup national knowledge contest on safe production and popularizing law, and selecting safe, civilized and polite flowing red flags. According to the characteristics of thermal power construction, safety knowledge publicity materials on aerial work, electric shock prevention, mechanical injury prevention and habitual violation prevention were collected and distributed to each operation team for organization and study. Educate employees to "obey the law and care for life" and improve their self-protection potential.

By publicizing the activities of Safety Production Month, we will create a strong safety and civilized construction atmosphere and improve the safety and civilized construction awareness of all employees.

Third, take Safety Month as an opportunity to solve several problems.

In the safety month activities, various departments, construction departments and managers at all levels actually solved several problems in the safety month activities, and aimed at the implementation of the safety month. During the safety production month, the safety and environmental protection department did a lot of work and solved a lot of problems. Two special safety inspections have been organized, which have rectified a number of problems and eliminated hidden dangers.

Do a good job in flood control, wind prevention and lightning protection in summer to ensure construction safety in flood season; Due to the influence of rain and dynamic load on the south side of section D of No.2 coal conveying tunnel, the slope is unstable, so we took timely measures to build Changcheng 17 with mortar. 5m, 5~7m high retaining wall.

Attach great importance to the safety management of aerial work. In view of the fact that there are many high-altitude operations on site and the danger is great, we mainly do three things: first, collect relevant high-altitude operation data and distribute them to all construction teams to improve the workers' knowledge of high-altitude safety; Second, the proportion of safety investment has been increased, and safety nets have been installed in key parts such as dumper room for protection; Third, strengthen on-site anti-habitual violation supervision. It is necessary to increase the punishment and management of habitual violations.

Summary of Van Wu Wen's Work Safety in Production

For 20__ years, our project department has always implemented the safety production policy of "safety first, prevention first and comprehensive treatment". Conscientiously implement the spirit and requirements of the higher authorities' documents on safety production. Strictly guard against accidents in production safety and fully implement the responsibility system for production safety. No casualties, mechanical equipment damage, fire and other safety accidents occurred in 20__ years, which laid the foundation for the _ _ project department to fully complete the year-end production target. The summary report on work safety in 20__ years is as follows:

I. Overview of the Project

This contract project is located in Ji 'an City, Jilin Province, and the main project of the contract is a tunnel project. It is planned to excavate the enlarged tunnel at the intersection of 17# branch tunnel and main tunnel for indoor maintenance in August, 2000. After three months of maintenance, it is planned to excavate the enlarged tunnel at the intersection of 7# branch tunnel and main tunnel in August, 2000 for indoor demolition, and transport it out from 20# branch tunnel. Up to now, about 5600m has been excavated. The output value of production and operation is about 9080. 1.8 million yuan.

Second, the construction of safety production infrastructure and system

1. At the beginning of the year, the project department set up a safety production leading group, defined the members and responsibilities of the safety production leading group, and issued the Notice on Paying Safety risk of mortgage according to the requirements of the company's safety production assessment management system, safety production responsibility system and safety risk of mortgage management measures. By signing the responsibility book for safety production layer by layer, the objectives and tasks of safety production work are decomposed layer by layer, which constitutes "from the project manager to the team leader, a total of 20" Responsibility Books for Safety Production "were signed, and a safety risk of mortgage of 90,000 yuan was paid.

2. According to the construction characteristics of the project department, the "safety management system" is compiled, including 33 safety management systems such as safety production responsibility system, safety input system, safety meeting system, safety inspection system, construction machinery and equipment management system and emergency avoidance system; 36 safety operation regulations, 7 safety management regulations and 8 safety measures and schemes were formally promulgated and implemented; Make the work of safety production step by step on the track of standardization and institutionalization.

Three, safety education and training and safety publicity and education work.

1, safety education and training status

Based on the national laws, regulations, standards, specifications and the actual situation of construction and production, the project department has carefully compiled "targeted and practical" safety education and training materials. Through three-level safety education, watching accident case videos, distributing employee safety manuals and other educational means, the safety awareness of employees will be comprehensively improved. There were 73 training sessions throughout the year, with a total of 5 13 person-times, and the admission education and training rate reached 100%. Among them, there are 2 special education sessions on the safe operation of small trains, 4 special education sessions for front-line construction workers and 4 special education sessions on safety video case analysis, which truly realizes the full coverage of safety education. According to the construction characteristics of this project and the demand for special operators, the project department organized two people to go to Xi to train and collect evidence for non-coal mine safety management personnel in February 20__. In June, 20 _ _ _, two people were organized to go to Xi 'an for safety training, and the evidence was delayed; In July, 20__, 6 people were organized to go to Tonghua City to participate in the operation and evidence collection of crane drivers; 20__, 10, 165438+ organized three people to go to Xi' an to conduct safety training and collect evidence for three types of personnel. Through training, the safety management level of safety managers and the post operation skills of special operators have been improved.

2. Safety publicity and education status

In order to create a good safety production atmosphere, the project department adopted various forms, such as hanging safety production banners, making safety production blackboard newspapers, holding the words "I want to be safe" and safety knowledge consultation days, to strengthen the publicity of safety production laws and regulations and safety production knowledge, so that safety production is deeply rooted in the hearts of the people. A total of 6 safety banners/kloc-0 were hoisted throughout the year; Make 3 safety bulletin boards, 3 safety publicity boards and post 36 safety posters; Hold "I want to be safe" and "Safety Production Consultation Day" each 1 time.

Four, safety inspection and hidden danger investigation and management status quo

In order to eliminate potential safety hazards in the construction site, safety protection measures are constantly improved. According to the safety inspection system of the project department and the requirements of relevant documents of the company and the sub-bureau, the daily, weekly, monthly, hidden danger investigation and various inspections of construction electricity, special equipment and vehicles are carried out in a planned way, and inspections, rectification and summary are carried out. All kinds of hidden dangers and matters that do not meet the safety standards are rectified and implemented according to regulations, and 75 hidden dangers are investigated in the whole year. Among them, there are 65 general hidden dangers and 65 major hidden dangers 10, all of which have been rectified as required. Rectification rate: 100%.

The development of verb (verb's abbreviation) safety activities

The project department earnestly implemented the spirit and requirements of the documents issued by the company, sub-bureaus and superior units, and carried out a series of special safety inspection and education activities such as "six strikes and six treatments", "seven inspections and seven inspections", "action against violations", "safety production month", "emergency training for frontline personnel", flood prevention and fighting, geological disasters, fire fighting and traffic safety, which strengthened the basic work of safety production and stabilized the overall situation of safety production. A total of 15 special safety inspection and education activities were carried out throughout the year. The hidden dangers and problems found can be rectified as required, and at the same time, the experience and lessons should be carefully summarized to ensure that the safety inspection is truly planned, inspected, rectified, summarized and improved.

Six, safety accidents

Safety accident management is carried out in strict accordance with the company's safety production accident management system and safety accident investigation system. There were no production safety fatalities and other safety accidents such as equipment and fire. The rate of work-related injuries and minor injuries is controlled at 5? During the year, the annual safety production target set by the project department was achieved.

Seven. Current situation of occupational health management

The project department shall carry out occupational disease prevention and control in strict accordance with the occupational disease prevention and control management system formulated by the company and the occupational disease prevention and control management measures formulated by the project department, and distribute occupational disease prevention and control supplies such as dust masks and noise-proof earplugs on time every month. On June 25th, 20__, the Notice on Employees Participating in Occupational Health Examination was issued, and 4 1 employees participated in the occupational health examination. No occupational health accidents occurred in the whole year, and the newly added occupational diseases were zero.

Eight, special equipment and special operations personnel management status

The special equipment within the construction scope of this project department includes: 2 bridge cranes and 1 gantry crane 1 set, all of which have passed the inspection by Tonghua Special Equipment Inspection Center. Check the safety of special equipment every month, and carefully record the daily operation and maintenance. The management account of special operators has been established, including 2 1 special operators such as riggers, welders and electricians, all of whom hold certificates, and the management account of special operators is updated once every quarter.

IX. Current situation of emergency management and drills

In order to prevent production safety accidents on the construction site, combined with the actual situation of construction and production of the project department, 12 special emergency plan for production safety, including earthquake disaster emergency rescue plan, collapse accident emergency rescue plan, inflammable and explosive dangerous goods accident emergency rescue plan, flood control emergency rescue plan, etc. Establish an emergency rescue team and establish an emergency rescue system for production safety. At the same time, the project department conducted targeted emergency drills for emergency rescue plans for flood control and flood fighting, fire accidents and geological disasters, with a total of 57 drills. Through the drills, the employees' awareness of accident prevention was strengthened, and their emergency escape potential and self-help and mutual rescue potential were improved.

X. Safety investment status

According to the safety management of the construction site, the project department will extract the safety expenses in strict accordance with the company's safety production input system and national laws and regulations. According to the requirements, 2% of the project cost of this contract is used as the safety production deposit. At the same time, in accordance with the principle of "project extraction, security needs, unit overall planning and standardized use", a special account for safety production investment funds is set up and managed. The annual safety production cost is 1546824. 370,000 yuan, actual investment 1, 755,484. 970,000, the overrun is 208,660. 60,000 yuan, the investment ratio is 2. 27%, in line with the requirements of the proportion of water conservancy and hydropower projects 2%. The specific inputs are as follows: Expenditure on safety engineering: 886,965,438+06. 870,000 yuan; Expenditure on safety activities: 13239. 30,000 yuan; Expenditure on labor protection and occupational health: 194207. 850,000 yuan; Daily safety management expenditure: 188676. 630,000 yuan; Other expenditures directly related to safety production: 472,444. 320,000 yuan.

XI。 Self-inspection of production safety

In order to further improve the safety management level of our project department, the project department earnestly carried out various management work in accordance with the company's safety production assessment management system, and carried out self-correction and self-inspection work in strict accordance with the assessment system. The internal self-inspection result of the project department is: the self-inspection score of safety production management assessment is 174.

This assessment is a summary of the safety production management work of my project for 20 years, and it is also a process and method to positively guide the work behavior and performance of my project department for 20 years. Our project department will take this assessment as an opportunity to further strengthen safety management, further stimulate the enthusiasm and creativity of our project department staff, improve work efficiency and ensure the continuous and stable construction and production of the project department.

Related articles:

1. Five safety production model articles.

2. Workshop safety work summary model essay

3. Workshop safety production work summary and plan model essay 2020

4.2020 annual work summary and five reflections on workshop safety.

5. The annual work summary of production safety selection model.