Adhere to the principle of putting prevention first in safety work, widely publicize the principles, policies and decrees of the party and the state on safety production, and regularly carry out education on labor protection principles and policies, ideological and political education, labor discipline education, legal education on safety technology knowledge, typical experience and vocational lessons. The details are as follows: 1. All kinds of personnel newly hired by the company must go through the three-level safety education of the company, branches and posts, and can only enter the site after passing the examination. 2. Newcomers in each position must go through on-site study and training, and pass the actual operation assessment before they can take up their posts with certificates: 1) All new recruits must go through on-site safety rules and regulations learning, on-site probation and follow-up operation. 2) The special operation (operation) personnel specified by the state must undergo relevant professional training and assessment, and can only take up their posts after obtaining the special operation certificate. 3. On-the-job production personnel training: 1) On-the-job production personnel should carry out targeted on-site training activities such as on-site examinations, anti-accident drills, technical questions and answers, and accident prediction; 2) Personnel who have been transferred from their posts for one month or more within the company must go through follow-up study and safety education familiar with the equipment system and operation mode, and can only take up their posts after passing the examination. 4. The company organizes all employees to focus on safety knowledge learning at least twice a year, take exams after learning, and make-up exams and retraining those who fail. Ensure that all post personnel are familiar with the first aid, emergency rescue methods and the correct use of fire fighting equipment at the scene of gas accidents. 5. The training attended by the leaders of all departments should include safety courses. The newly appointed leaders of the production department should learn the relevant safety guidelines, policies, rules and regulations and post safety responsibilities, and can only take up their posts after passing the examination. 6. For accidents, equipment failures and serious near misses caused by violation of regulations, organize relevant personnel to conduct on-site education, draw lessons from accidents, and prevent similar accidents from happening again. Conduct safety education for the parties who should stop working. 7. Pressure vessel, welding, vehicle driving and other special type of work personnel, must go through special safety operation training, and pass the examination, after obtaining the qualification certificate, can mount guard. 8. The company establishes a safety activity day and a safety production inspection system before and after work, carefully fills in various safety management ledgers, and conducts safety education for employees on a regular basis. According to the actual situation, carry out and carry out safety production publicity activities. 9. Before adopting new technologies, new production methods and new equipment, special education should be given to post operators and relevant personnel according to safety operation procedures, and they can operate independently only after passing the examination. 10, safety responsibilities ① Safety responsibilities of leaders at all levels Project manager: Take overall leadership responsibility for safety production and labor protection of this project. Carry out the guidelines, policies, rules and regulations of the state, industry and company on safety production, organize the formulation of the safety management system of this project, study and solve the problems in safety production, and organize safety production inspection; Supervise all levels and functional departments to implement the responsibility system for production safety; Preside over the investigation and handling of major accidents. Chief Engineer: Be directly responsible for the technical measures of project safety production and labor protection. When organizing the preparation of construction organization design, corresponding safety technical measures should be prepared at the same time. When adopting new technologies, new materials, new processes and new equipment, formulate corresponding safety operation procedures; Responsible for reviewing technical education to improve workers' working conditions; Participate in the investigation and analysis of major casualty accidents and put forward technical appraisal opinions and improvement measures. Captain of the construction team: Take specific leadership responsibility for the safety production of this specialty. When organizing construction, seriously implement the rules and regulations of production safety and the relevant regulations of superiors; Do not command in violation of regulations, and do not force workers to take risks. Find illegal operations and resolutely stop them; Conscientiously implement the safety production system in construction and formulate implementation rules according to the site conditions, regularly inspect the construction site, eliminate hidden dangers in time, and regularly educate employees on safety technology and safety discipline; Report major accidents in time, carefully analyze the causes of accidents, put forward improvement measures and implement them. (2) Enterprise employees' safety responsibilities The certified employees of special operations personnel consciously abide by safety production rules and regulations, do not operate illegally, and strictly follow the following safety construction points. Construction personnel should wear safety helmets when entering the site and use personal labor protection articles correctly. Fasten your seat belt when working in a place where there is no springboard or platform more than two meters. Non-professional electromechanical operators should not use or tamper with electromechanical equipment. All kinds of mechanical and electrical equipment have reliable and effective safety grounding and lightning protection devices. ③ Safety responsibilities of technical departments of functional departments: Work out the construction organization design of the project in strict accordance with the requirements of safety production, and at the same time work out safety design measures; For the new technologies, new materials, new processes and new equipment adopted by enterprises, the operating rules for safety technology should be carefully compiled; Seriously solve the safety technical problems in production. Mechanical and electric power department: strengthen the inspection, repair and maintenance of mechanical equipment, check early and prevent early, mechanical work is disease-free, and cars do not "overtake"; Ensure that the safety device is complete, sensitive and reliable, and ensure the normal and safe operation of the equipment. Ministry of materials and equipment: Ensure the timely supply of materials, tools and labor protection articles needed for safe production and meet the quality requirements of safe production. Labor Department: Cooperate with relevant departments to do a good job in safety technical training and assessment for new workers, workers with special trades and workers with changed trades, and urge grass-roots units to do a good job of combining work with rest and strictly control overtime.

The above are collected and sorted by Zhong Da Consulting Company.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd