Safety production knowledge training questions 1, fill-in-the-blank questions (65438+ 0 points per grid)
1, workplaces and construction vehicles where people often work should be equipped with () and stored in (), and designated persons should be regularly inspected, supplemented or replaced.
2, all kinds of homework personnel should know the job site and job () () and emergency measures.
3, homework personnel to deal with this procedure every year (). If the electrical work is interrupted (above) for some reason, they should re-learn this regulation and can resume their work only after passing the examination.
5, anyone found in violation of this regulation, should immediately (), after () to resume operation. All kinds of operators have the right to () command in violation of regulations and () take risks; Have the right to stop operation or (workplace) after taking possible emergency measures, and immediately report the situation that () directly endangers the safety of people, power grid and equipment.
7, the operator should be familiar with (). Personnel on duty alone or () should also have practical work experience.
8, regardless of whether the high voltage equipment is charged, the staff shall not work alone () or (); If you need to keep out (), you should be present () and meet the safety distance in Table 2-L.
9. After the handcart switch is pulled out, observe whether the isolation () is reliably closed. The terminal spare hole of the lead-out cable () or bus bar of the enclosed combined electrical appliance should be closed ().
10, the neutral grounding system of high-voltage equipment in operation () should be regarded as a charged body.
1 1. Personnel who are allowed to patrol the high-voltage equipment alone are not allowed to do () other work or () block the bar when patrolling () the equipment.
9. Doors, passages, stairs and platforms are not allowed () to avoid obstructing traffic.
10. If heat pipes or other heat bodies are laid around oil pipe flanges and valves, they must be wrapped outside the heat body insulation layer to prevent fire (). Whether in maintenance or operation, if oil leaks to (), the insulation layer should be ().
Second, multiple-choice questions: (single choice, 2 points for each question)
1, everyone is responsible for production safety. Do a good job in the safety of power generation enterprises. Which of the following statements is true? ( )
First, give play to the role of safety supervision institutions,
B, give play to the role of mass public security organizations,
C. Give play to the role of safety supervision institutions and mass safety organizations,
D. Give play to the role of leadership and safety supervision institutions,
2. Which of the following statements is correct? ( )
Factory leaders can issue orders that violate safety regulations.
B, factory leaders can issue orders that violate safety regulations when employees or equipment are in danger.
C, the long-term value in personnel or equipment in danger, can be issued in violation of safety regulations.
D leaders at all levels are not allowed to issue orders in violation of these regulations.
3. Which of the following statements is correct? ( )
A anyone entering the production site (except office, control room, duty room and maintenance team room) must wear safety helmet.
B, non-working personnel to enter the production site (except office, control room, duty room and maintenance team room), shall not wear safety helmet.
C, foreign inspectors into the production site, can not wear a helmet.
D, anyone entering the production site anywhere, must wear a helmet.
4. Which of the following statements is correct? ( )
A, any electrical equipment signs, in addition to the original place personnel or personnel on duty responsible for the operation, * * * any personnel are not allowed to move.
B, signs on any equipment, in addition to the original place personnel or personnel on duty responsible for the operation, * * * any personnel are not allowed to move.
C, any electrical equipment signs, except the original place, * * * any other personnel are not allowed to move.
D, any electrical equipment signs, except the person in charge of the operation on duty, * * * any other personnel are not allowed to move.
5. Which of the following statements is correct? ( )
A, operation monitor must obtain the permission of the long-term value, to allow maintenance personnel to work.
B, the monitor of the operation must be done after the long-term value of safety measures, to allow maintenance personnel to work.
C, operation monitor must be approved by the long-term value and take safety measures before allowing maintenance personnel to work.
D, operation monitor must get working ticket, to allow maintenance personnel to work.
6. Which statement is correct? ( )
First, before the work permit, it should be issued to the person in charge of the work.
B, before permission to work, should be kept in the work permit.
C before work is allowed, one work ticket shall be issued to the person in charge of the work, and the other shall be kept by the work permit.
D before work is allowed, one working ticket shall be issued to the staff and the other shall be kept in the control room.
7. Which statement is correct? ( )
A. If the work cannot be completed within the planned time limit, the work extension formalities must be handled by the person in charge of the work.
B. If the work can't be completed within the planned time limit, the work permit holder must go through the work extension formalities.
C. If the work cannot be completed within the planned time limit, it must be postponed by the shift supervisor.
D, if the work can't be completed within the planned time limit, the work extension formalities must be handled by the attendant.
Three. True or false questions (65438+ 0 point for each question)
0 1. Anyone who enters the production site should wear a safety helmet. ( )
02. After passing the test, the safety instrument shall be affixed with the certificate of approval in an eye-catching position that does not hinder the insulation performance. ( )
03. When moving long objects such as ladders and pipes in outdoor substations and high-voltage rooms, two people should carry them, and keep a sufficient safe distance from the live parts. ( )
04, power switching operation should be in accordance with the switch-load side isolation breaker-power side isolation breaker in turn, power switching operation should be carried out in the opposite order. It is forbidden to close the circuit breaker with load. ( )
05, the so-called electrical equipment in use, refers to all with voltage, some with voltage or once with voltage operation of electrical equipment. ( )
06. Both the working ticket issuer and the working director can fill in the working ticket. ( )
07, fire, earthquake, typhoon, flood and other disasters, in order to ensure the safe operation of equipment, equipment should be inspected at any time. ( )
08. The second working ticket can be used for the same type of work in which several electrical connection parts are not powered off in turn. ( )
09, after closing can be sent to the workplace switch and circuit breaker operating handle should be hung? Don't shut it down, someone is working! ? Signboard. ( )
10, drilling holes in floors and structures or installing lifting blocks or stacking heavy objects outside the specified places must be approved by the safety supervision department of the unit. ( )
1 1. When the special guardian leaves temporarily, he must appoint a temporary guardian and inform the staff. ( )
12. It is forbidden to walk on railings, pipes, backrest wheels, safety covers or bearings of running equipment. If you have to work on a pipe, you must take safety measures. ( )
13, new electricians, interns, temporary workers (managers, temporary workers, etc. ) Only after receiving safety knowledge education can you take part in the designated work, and you are not allowed to work alone. ( )
14. Avoid using metal ladders in live areas or near live lines of substations (switching stations). ( )
15, and three-phase short-circuit grounding wire shall be used as the grounding wire. If a split-phase grounding wire is used, a three-phase integrated grounding terminal should be set. ( )
16. If you find someone suffering from heatstroke, you should immediately move the patient from high temperature or scorching sun to a cool and ventilated place to rest. Take a bath with cold water, cover your body with a wet towel, blow with an electric fan, or apply an ice pack on your head to cool down, and give the patient oral saline in time. Severe cases are sent to hospital for treatment. ( )
17, insulating gloves must be worn for high-voltage electricity inspection. The length of the telescopic insulating rod of the electroscope must be fully extended. When checking electricity, the hand must be held at the handle and must not exceed the buckle. The human body must keep a safe distance from the electroscope. ( )
18, regardless of whether the high-voltage equipment is charged or not, the staff shall not move alone or work across obstacles; If obstacles need to be removed, the safe distance between the normal moving range and the safe distance of live equipment must be met. ( )
19. In case of personal electric shock accident, in order to rescue the electric shock victim, the power supply of related equipment can be disconnected without authorization, but it should be reported to the dispatcher and superior immediately afterwards. ( )
20. Complete power failure refers to the complete power failure of indoor and outdoor high-voltage equipment (including overhead lines and cable inlet lines), and all doors leading to adjacent high-voltage rooms are locked. ( )
2 1. In the work ticket, the work ticket issuer, the person in charge of the work and the work permit holder shall not concurrently hold the post. The person in charge of the work can fill in the working ticket. ( )
22, if an electrical connection or a power distribution device all power failure, so all the work in different locations, can be sent to a working ticket, but to fill in the main work content in detail. ( )
23, check the electricity, should use the corresponding voltage level and qualified contact electroscope. ( )
24, maintenance equipment and may call the side of the circuit breaker (switch), isolating switch (breaker) must disconnect the control power supply and closing power supply, isolating switch (breaker) operating handle must be locked, to ensure that it will not be sent by mistake. ( )
25. After the handcart switch in the high-voltage switchgear is pulled out, it is forbidden to open and close the baffle to isolate the live part. Set? Stop, high pressure danger! ? Signboard. ( )
(5) Short answer questions: (each question 10)
1, Basic requirements for electric tools and appliances?
2. How to use MFZL-8kg dry powder fire extinguisher:
3, the use of fire hydrant and hose: