2. Abide by the rules and regulations of the laboratory, keep the laboratory clean and quiet, pay attention to the cleanliness of the table (table) and instruments, and prohibit smoking, eating and storing items unrelated to the experiment indoors.
3. The laboratory should be equipped with necessary experimental facilities according to the needs of testing work to ensure that the energy, lighting and ventilation in the working area can meet the needs of the work. For working areas with special requirements (such as microbiology room), facilities should be configured according to relevant requirements; The use environment conditions of instruments and equipment shall meet the requirements of the manual. If there are requirements for temperature, humidity and electromagnetic interference prevention, air conditioners, dehumidifiers and thermometers should be equipped.
4. All kinds of instruments and equipment in the laboratory should be placed in a fixed place as required; When using all kinds of instruments and equipment, you must strictly abide by the safe use rules and operating procedures, fill in the use registration form carefully, and report the problems in time.
5. All kinds of electrical equipment and appliances in the laboratory shall be placed in the specified setting place, and shall not be moved at will, and the safe use rules must be strictly observed when using.
6. In the analysis and testing work, it is necessary to understand the respective performances and operating procedures of the chemical reagents and instruments used, and prepare for protection before starting work. When using flammable, explosive and highly toxic reagents, operations must be carried out in accordance with relevant regulations.
7. In order to ensure the safety of wires, wires such as refrigerators and incubators must be separated from laboratory electricity. Old electrical lines or worn wires should be replaced in time, and switches, sockets and instrument grounding devices should be checked frequently.
8. High-pressure gas cylinders should be set in a safe place and fixed. Regularly check the air tightness of acetylene cylinder and the working state of leakage alarm device. All kinds of gas cylinders should have residual gas with safety margin.
9. When working with naked flame, the operator should not leave the laboratory without authorization, and cut off the power supply, gas source and fire source in time after the experiment. Before leaving work, the safety officer will check the water, electricity, fire, gas, doors and windows.
10. The concentrated acid-base waste liquid should be neutralized before being poured into the sewer, and the toxic residual liquid should be collected and treated according to the operation procedures.
1 1. The laboratory should be equipped with various necessary safety facilities (fume hoods, dust hoods, reagent cabinets, fire-fighting equipment, etc.). ); Fire fighting equipment should be checked regularly, and it is not allowed to misappropriate it at will to ensure that it is available at any time; When an unexpected safety accident occurs in the laboratory, the power supply, gas source and fire source should be cut off quickly, and effective measures should be taken immediately to deal with it in time and report to the relevant leaders.
12. Newly-hired inspectors must first arrange to receive safety knowledge education and learn relevant rules and regulations.
13. The laboratory must be equipped with commonly used first-aid medicines and shower facilities in case of emergency. The answer comes from