1. Maintenance personnel should be specially trained and familiar with the basic working principle and safety operation procedures of the equipment on the station.
2. During maintenance, explosion-proof measures should be taken or explosion-proof tools should be used, and any operation that can generate sparks is strictly prohibited.
3. When maintaining equipment or pipeline under pressure, you must first release the pressure and close the upper and lower valves of the maintenance point. Maintenance or maintenance under pressure is prohibited.
4. When maintaining electrical equipment, cut off the power supply first, and set warning signs at the switch to avoid misoperation.
5. Maintenance personnel should wear safety belts, helmets and other protective tools when working at high altitude or on special occasions, and the tools they carry should be kept strictly. It is forbidden to transfer tools by throwing.
6. When hot work is needed, hot work procedures shall be handled with relevant departments of the company, and on-site safety monitoring shall be done.
7. The emergency repair work should be under unified command, with strict discipline, take practical safety measures and strictly implement the emergency plan of the gas station.
8. After the emergency repair personnel arrive at the job site, determine the warning zone according to the degree of gas leakage and set warning signs; Fires and mobile phones are prohibited in the warning area, traffic is controlled, and irrelevant personnel are prohibited from entering.
9. Without approval, non-explosion-proof mechanical and electrical equipment and instruments shall not be used in the warning area.
10. After pipeline and equipment maintenance, a comprehensive inspection should be conducted to eliminate hidden dangers.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd