Safety production accident notification Fan Safety production accident notification Recently, two industrial accidents occurred, both of which were finger crush injuries. Details of the accident are as follows:
At about 4: 30 pm on June 19, Zhao, an end milling cutter operator in the lathe workshop, accidentally touched the switch with his left hand, and the indenter fell to press the middle finger of Zhao's left hand, resulting in the end of Zhao's left middle finger being crushed and the phalanx exposed. Diagnosed by the Third Hospital of Anji County, he was amputated. After the company leaders and Zhao's parents insisted on conservative treatment, they basically recovered after one month. Although he didn't cause disability, the scar on the crush was obvious and the nails hadn't grown out yet. 12 At about 9: 00 a.m. on July 9, 2008, Jin, the operator of the fixture car in the automobile processing workshop, did not take out his hand when he put the material into the fixture, and his right foot stepped on the switch, and the chuck pressed the thumb of Jin's right hand, causing the end of the thumb to fracture and the nail to fall off. After being treated by Anji Puji Orthopedic Hospital, the medical treatment period has not yet ended. Two accidents, different time, same reason, distraction, negligence and improper operation. After the accident, the lathe workshop immediately formulated and implemented rectification measures, and educated the operators and gave them standardized operation guidance. Wang Ling, director of the workshop, didn't emphasize objectivity and shirked responsibility. He took the accident as a lesson and drew inferences from others, so that the workshop staff received a profound safety education. What does the country care about after the accident? Four don't let go? The treatment principle is:
1, the cause of the accident has not been ascertained;
2, the responsible person has not been dealt with;
3, the person responsible for the accident and the surrounding people are not educated; 4. The feasible corrective measures formulated by the accident have not been implemented. Accident handling? Four don't let go? The principle is to seriously investigate and deal with work-related accidents in production safety, learn lessons and prevent similar accidents from happening again. To this end, the company decided that according to the contracts signed between the company and various workshops and sections? Safety responsibility certificate? The person in charge of production safety in the workshop where the accident occurred will deduct points in the performance appraisal and annual safety appraisal. Give the parties to the accident an administrative warning. ? Hidden dangers are more dangerous than open flames, prevention is better than disaster relief, and responsibility is more important than Mount Tai! ? It is hoped that the person in charge of production safety in each workshop and section and all employees will take this as an example, carry out extensive education and study on production safety, strictly abide by the safety operation rules, accept the lessons of accidents, and prevent similar accidents from happening again.
Safety in production should be alarmed!
Company safety production leading group
July 20(th)
Fan Township People's Government, street offices, members of the Municipal Safety Committee production safety accident notification:
Recently, there have been many production safety accidents in our city, resulting in two deaths and 1 serious injuries. On February 23, Zhejiang Jiangshan Tiger Ball Cement Co., Ltd. (Quzhou South Cement Co., Ltd.) in Hecun Town fell from a height, causing 1 person to be seriously injured; On March 3rd, Zheng Jianying (individual industrial and commercial households) saw board factory in Hecun town suffered a mechanical injury accident, resulting in 1 death; On March 65438+6, 2006, a fall accident occurred at Han Li Decoration Material Factory in Jiangshan City, Xiakou Town, causing 1 person to die.
The occurrence of these three accidents revealed that there are still many weak links in the work of safety production in our city, such as the lack of safety awareness of relevant units and enterprises, the failure to implement the main responsibility of safety production in some enterprises, the failure to implement safety precautions, the confusion of safety management at the production site, the lack of effective safety investment and guarantee, the lack of in-depth safety education and training for employees, the existence of illegal, illegal and risky operations, the lack of effective safety inspection in the daily production process of enterprises, and the failure to find safety hazards in time and make rectification.
The main leaders of the Municipal Party Committee and the Municipal Government attach great importance to the current grim situation of production safety, and require all towns (streets) and relevant departments and units to further strengthen the supervision and inspection of production safety and severely crack down on the failure to implement the main responsibility of production safety in enterprises. In order to draw a profound lesson from accidents, draw inferences from others, quickly do a good job in safety production in key areas such as road traffic, industrial and commercial enterprises, dangerous chemicals and non-coal mines, and effectively prevent all kinds of accidents, we hereby put forward the following requirements:
First, strengthen the responsibility of safety supervision and implement the main responsibility of safety production.
Towns (streets), departments and units should conscientiously implement the spirit of the province's production safety video conference and the "Opinions of the Central Committee of the State Council on Promoting the Reform and Development of Production Safety", in accordance with? Party and government have the same responsibility, one post and two responsibilities? Requirements and territorial management, Three must? Principle, strengthen the responsibility of safety production supervision and eliminate supervision? Blind spot? 、? Dead end? Effectively urge all responsible subjects to effectively assume the responsibility of the main body of production safety; Give full play to the role of socialized service of production safety. Green insurance? Mechanism, through the services and help of third-party insurance and service institutions, to promote enterprises to implement the main responsibilities such as self-examination and self-correction of hidden dangers, safety production investment, safety education and training, eliminate safety hazards, improve the production environment and improve the ability of safety production support.
Two, in-depth management of hidden dangers, standardize the safety management of field operations.
Towns (streets), departments and units should continue to carry out in-depth investigation and rectification of production safety in key areas such as road traffic, construction, bamboo and wood processing, dangerous chemicals and industrial and commercial enterprises in accordance with the requirements of the Work Plan for Investigation and Rectification of Production Safety (No.4 of Jiang 'an Committee Office [2017]). Want to increase road traffic? Three excesses and one violation? Rectify the phenomenon and severely crack down on illegal acts such as speeding, overcrowding, overloading, driving without a license, fatigue driving and drunk driving; Supervise and urge road passenger and freight transport enterprises to strengthen vehicle safety management and safety training for drivers and passengers, and improve the ability of accident emergency prevention and disposal. Want to increase the construction site of the project under construction? Three violations? Rectify the phenomenon, urge the construction unit to improve the safe production environment, strengthen safety precautions, and prevent accidents such as fire, falling from a height, electric shock, collapse and mechanical injury; For dangerous sub-projects and sub-projects prone to accidents, special construction schemes must be strictly implemented, and on-site monitoring and technical guidance should be strengthened to ensure on-site construction specifications. It is necessary to strengthen the safety inspection of all links in the production of dangerous chemicals enterprises, focus on the safety management of climbing, hot work, lifting, painting, dangerous operations in confined spaces, welding, etc. at the production site, urge enterprises to operate in strict accordance with the operating rules, standardize the post operation behavior of employees, and put an end to? Three violations? Operation phenomenon, to ensure production safety. It is necessary to strengthen the fire safety inspection in inflammable, explosive and crowded places, urge production and business units to do a good job in the investigation and management of fire hazards, standardize the storage and use of flammable materials, strengthen the on-site management of painting, electric welding and other operations, ensure smooth fire prevention spacing and passages, improve fire control facilities and prevent accidents. It is necessary to strengthen the safety inspection of bamboo and wood processing and industrial and commercial enterprises, urge industrial and commercial enterprises, especially small and micro enterprises, to strengthen the infrastructure construction of safety production, standardize operational behaviors, improve the safety awareness and operational skills of employees, strictly implement safety operation procedures, reduce and eliminate the phenomenon of "three violations" and comprehensively improve the level of on-site safety management.
Three, strengthen safety education and training, improve the safety awareness of workers.
Towns (streets), departments and units should strengthen enterprise management? Three categories? Personnel, construction workers, special operations personnel education and training, improve their awareness of production safety and operational skills, enhance self-protection and emergency response capabilities. It is necessary to use various channels and forms to carry out special publicity and education activities on safety production, popularize safety knowledge, make publicity and education regular and institutionalized, and create a good safety atmosphere.
At the same time, towns (streets), departments and units should strictly implement the accident information reporting system, comprehensively do a good job in information reporting and handling of production safety accidents and other emergencies, and ensure timely and accurate reporting of important information such as accident information.
Office of xx Municipal Work Safety Committee
March 2, 20081day
Fan Wensan 1 Production Safety Accident Notification, Accident Process:
From the morning of xx to the morning of xx, xx, xxxx, inspector xxx of the production department was inspecting the incoming steel pipes and disassembling the packed steel pipes. When cutting the pipe bundle with wire cutters, he was injured by scattered steel pipes, hurting his foot and left ankle.
2, the cause of the accident:
(1) Weak safety awareness;
(2) lack of work experience;
Leading to incorrect standing posture and improper working methods, leading to the steel pipe falling and hurting the left ankle.
3. Nature of the accident: minor injury accident. Investigate and verify according to the safety and accident report provided by the production department. Safety award? The definition of the scope, after deducting xxx safety award of the accident employee in that month.