Technical agreement contract mode 1
Party A:
Party B:
Whereas Party A owns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
I. Contents, requirements and industrialization development degree of technology provided by Party A:
__________________________________________________。
Two. The technical scope that Party B can use and the sales scope of future products provided by Party A:
________________________________________。
Three. Scope and duration of protection of technical secrets: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Four. Contents of technical guidance: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5. The technical instructors shall be sent by Party A, and the travel expenses and consulting service fees shall be borne by Party B. The specific cost standard shall be determined by both parties through separate agreement. ..
Technical data and materials of intransitive verbs, as well as the time limit, place and method of submission: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Seven. Criteria and methods of acceptance: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Eight, technology use fee and payment method:
(1) According to the profit share, the ratio of A: B is _ _ _ _ _ _; (2) The sales commission is _ _ _ _ _ _ _%
Nine. Cooperation mode: Party A shall provide qualified technical and related technical consulting services according to the agreement, and both parties shall separately establish accounts for the cost, sales and profit of the products produced by the technology in this agreement, and both parties shall send personnel to supervise. When conditions are ripe, Party B or both parties shall set up a project company for technical production projects.
X term of cooperation: _ _ _ _ _ _ _.
XI。 Provision and sharing of subsequent improvements: Party A and Party B agree that the improvement or innovation of existing technology and the ownership of other technologies obtained from this technology still belong to Party A, but Party B has the right to continue to use them free of charge during the cooperation period.
Twelve. Other agreements: When Party A and Party B cooperate on this technology, Party A shall not be restricted from cooperating with other enterprises or individuals who have the conditions to implement this technology.
Thirteen. Liability for breach of contract: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Fourteen Dispute settlement: Any dispute arising from this agreement shall be settled by both parties through friendly negotiation. If negotiation fails, both parties agree to submit it to the arbitration commission where the technology provider is located for arbitration.
15. This agreement has legal effect from the date of signing by both parties, in duplicate, with each party holding one copy.
Sixteen. For matters not covered in this agreement, both parties may sign a supplementary agreement or change the contents of this agreement after further negotiation, and the supplementary agreement or change has the same legal effect as this agreement.
Party A: _ _ _ _ _ _ Party B: _ _ _ _ _ _
Signature: _ _ _ _ _ _ Signature: _ _ _ _ _ _
Signing place: _ _ _ _ _ _ Signing date: _ _ _ _ _ _ _
Technical agreement contract mode 2
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Article 1 Intellectual property rights
Monternet mobile business short message system technology cooperation development components stand-alone version, online version and related versions, including related media, printed materials and online or electronic documents. The products are independently developed and owned by Monternet Digital Technology Co., Ltd. (hereinafter referred to as Party A), and liuxue86.com is protected by international intellectual property laws and conventions. Party A owns the ownership, modification, use and final interpretation of the products.
Article 2 Confirmation of Agreement
This agreement is valid for the stand-alone version, online version and related versions of Monternet mobile business short message system technical cooperation development components, including related media, printed materials, online or electronic documents and other products. Units or individuals that have not signed this Agreement with Party A and are not authorized by Party A shall not modify, use, copy, disseminate, publicly display, implement, reprint, decompile or use it for other purposes in any form.
Article 3 Rights and obligations of users
1. User rights
Party B shall abide by the terms and conditions of this agreement, and Party A grants Party B the following rights:
A. Application
After signing this agreement with Party A and obtaining the authorization of Party A, the following applications can be applied to this product: system testing, product embedding and other secondary development based on this product.
B. Performance or benchmarks
Without the prior written consent of Party A, Party B shall not disclose to any third party any benchmark test results of Monternet mobile service short message system technical cooperation development component stand-alone version, network version and related versions.
Reserved rights.
Party A reserves all rights not expressly granted to Party B in this Agreement.
2. Party B's obligations
Any user who signs this agreement with Party A and is authorized by Party A shall consciously abide by this agreement. Without the authorization or permission of Party A, this product or related products embedded in this product, including related media, printed materials and online or electronic documents, shall not be copied, disseminated, publicly displayed, promoted, reprinted or decompiled, or used for other unauthorized purposes. Users have the obligation to keep the technical secrets of the products and be responsible for the leakage phenomenon caused by any reason, and Party A reserves all rights to pursue relevant responsibilities.
Step 3 transfer
After Party B signs relevant agreements with Party A, with the authorization of Party A, Party B can provide software, systems or middleware including this product and other related program products, including related media, printed materials and online or electronic documents to third parties.
() finishing, the copyright belongs to the original author and the original source. 』
4. Restrictions on reverse engineering, decompilation and disassembly
Without the authorization of Party A, it is not allowed to reverse engineer, decompile or disassemble the stand-alone version, online version and related versions of Monternet mobile service short message system technical cooperation development components and any form of behavior.
Article 4 Termination
If Party B fails to abide by the terms and conditions of this agreement, Party A has the right to terminate this agreement. Meanwhile, Party B must destroy all materials and documents provided by Party A to Party B. ..
Article 5 Technical Support
Party A only provides technical support to users who sign this agreement, including telephone, e-mail, documents, training, etc.
Article 6 Applicable law.
The validity, interpretation, signing, performance and dispute settlement of this Agreement shall be governed by the laws of People's Republic of China (PRC), that is, _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(Signature/Seal)
Person in charge: _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Mode 3 of technical agreement contract
Client (hereinafter referred to as Party A): _ _ _ _ _ _ _
Legal representative or person in charge: _ _ _ _ _ _ _
Service Party (hereinafter referred to as Party B): _ _ _ _ _ _ _
Legal representative or person in charge: _ _ _ _ _ _ _
In order to cooperate hand in hand, promote development, satisfy interests and clarify responsibilities, Party A and Party B, in accordance with the relevant provisions of the relevant laws of People's Republic of China (PRC), in line with the principles of good faith and mutual benefit, and in combination with the actual situation of both parties, hereby conclude this contract for both parties to abide by:
Article 1 Project name
_________。
Article 2 Service Contents, Methods and Requirements
1. Service content:
_________。
2. Mode:
_________。
3. Requirements:
_________。
Article 3 Working conditions:
_________。
Article 4 Remuneration and payment methods:
1. Remuneration for this project (service fee or training fee): _ _ _ _ _ _ _ _ _ _ _.
The expenses required for the entrusted party to complete professional technical work and solve technical problems shall be borne by _ _ _ _ _.
2. The activity expenses of the intermediary agencies in this project are _ _ _ _ _ _ _ _ _ Yuan, which shall be borne by _ _ _ _ _. The remuneration of the intermediary is _ _ _ _ _ _ _ Yuan, which shall be paid by _ _ _ _ _ _.
3. The payment method is the following _ _ _ _ _ _ _:
(1) Pay _ _ _ _% of the total remuneration to Party B within _ _ _ days after the contract comes into effect;
(2) Party A shall pay all the remuneration balance to Party B within _ _ _ _ _ _ days after the completion of the contract (from the date of acceptance).
(3) Other ways: _ _ _ _ _ _.
Article 5 representations and warranties
Party A:
1. Party A is an enterprise legally established and existing, and has the right to sign and have the ability to perform this contract.
2. All procedures required for Party A to sign and perform this contract have been completed and are legal and effective.
3. At the time of signing this contract, no court, arbitration institution, administrative organ or regulatory body has made any judgment, ruling, ruling or specific administrative act that may have a significant adverse impact on Party A's performance of this contract.
4. The internal authorization procedures required for Party A to sign this contract have been completed, and the signatory of this contract is the legal representative or authorized representative of Party A. After this contract comes into effect, it is legally binding on both parties.
Party B:
1. Party B is a legally established and existing enterprise, and has the right to sign and have the ability to perform this contract.
2. All procedures required for Party B to sign and perform this contract have been completed and are legal and effective.
3. At the time of signing this contract, no court, arbitration institution, administrative organ or regulatory body has made any judgment, ruling, ruling or specific administrative act that may have a significant adverse impact on Party B's performance of this contract.
4. The internal authorization procedures required for Party B to sign this contract have been completed, and the signatory of this contract is the legal representative or authorized representative of Party B. After this contract comes into effect, it is legally binding on both parties.
Article 6 Main obligations of Party A
1. Provide Party B with the following technical data, data, materials and samples within _ _ _ _ days after the contract comes into effect:
_________。
2. After receiving the notice of Party B's request to improve or replace the technical data, data, materials and samples that are not in conformity with the contract, it shall make a timely reply within _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. Pay remuneration to Party B as agreed, and Party B's bank account is _ _ _ _ _ _ _.
4. Assist Party B to complete the following cooperation matters:
_________。
Article 7 Main obligations of Party B
1. Complete the technical service work before _ _ _ _ _ _ _ _ _
2. Complete technical services according to the following technical and economic indicators: _ _ _ _ _ _ _ _ _;
3. If it is found that the technical data, data, samples, materials or working conditions provided by Party A are inconsistent with the contract, it shall notify the entrusting party to improve or replace them within _ _ _ _ _ days after the contract comes into effect;
4. Keep the technical data and samples handed over by Party A properly; During the performance of the contract, if it is found that the continued work is in danger of damaging materials, samples or equipment, the work shall be suspended and the entrusting party shall be informed in time; After the work is completed, the above technical data and samples shall be returned, and copies shall not be kept without authorization.
Article 8 Confidentiality Clause
Both parties promise to keep confidential the business secrets (technical information, business information and other business secrets) obtained from the other party that cannot be obtained through public channels. Without the consent of the original provider of the trade secret, one party shall not disclose all or part of the trade secret to any third party. Unless otherwise stipulated by laws and regulations or otherwise agreed by both parties. The confidentiality period is _ _ _ _ _ _ _ years.
If one party violates the above confidentiality obligations, it shall bear the corresponding liabilities for breach of contract and compensate the losses caused thereby.
Article 9 Ownership of technological achievements' benefits
During the performance of this contract, the new technical achievements completed by Party B by using the technical data and working conditions provided by Party A belong to Party B. (Note: both parties may have other different agreements. )
Article 10 Party A's liability for breach of contract
1. If Party A fails to provide relevant technical data, data, samples and working conditions as agreed in the contract, which affects the quality and progress of the work, it shall pay the remuneration in full. If Party B fails to provide the agreed material and technical conditions two months overdue, Party B has the right to terminate the contract, and Party A shall pay liquidated damages of _ _ _ _% of the total remuneration.
2. If Party A delays the payment of remuneration, it shall pay liquidated damages of _ _ _% of the total remuneration; If the remuneration or liquidated damages are not paid within two months, the work results shall be returned, supplementary remuneration shall be paid, and _ _ _ _% of the total remuneration shall be paid as liquidated damages.
3. If Party A fails to receive the work results, it shall pay _ _ _ _% of the total remuneration as liquidated damages and safekeeping fee. If Party B fails to receive the work results within two months, Party B has the right to sell and dispose of the work results. After deducting the remuneration, liquidated damages and storage fees, the rest will be returned to Party A. If the income is insufficient to pay the remuneration, liquidated damages and storage fees, Party B has the right to demand compensation from Party A..
Article 11 Party B's liability for breach of contract
1. If the contract is not performed without authorization, the remuneration shall be exempted and a penalty of _ _ _ _% of the total remuneration shall be paid.
2. If the work is not completed within the agreed time limit, it shall pay a penalty of _ _ _ _ _ of the total remuneration.
3. Those who fail to complete the work according to the quality and quantity shall be responsible for rework, improvement or full compensation. If losses are caused to Party A, it shall compensate for the losses;
4. During working hours, if it is found that the technical data, data, samples, materials or working conditions provided by the other party do not conform to the provisions of the contract, and the entrusting party is not informed within the agreed time limit, resulting in the stagnation, delay or non-performance of technical services, the remuneration shall be reduced or exempted as appropriate;
5. During the working period, if the goods provided by the entrusting party are found to be in danger of damage, and the entrusting party is not informed within the agreed time limit, it shall bear the losses caused thereby.
6. Whoever, in violation of the provisions of the contract, quotes, publishes or provides relevant technical materials, data, samples or work results to a third party without authorization shall pay a penalty of _ _ _ _ _ _ _ percent of the total remuneration.
7. If the samples, data and technical data delivered by Party A are not kept properly, resulting in loss, shortage, deterioration, pollution or damage, it shall compensate for the losses.
Article 12 acceptance criteria and methods
1. Acceptance time: _ _ _ _ _ _ _;
2. Acceptance place: _ _ _ _ _ _ _ _;
3. Acceptance criteria: various technical indicators agreed in this contract;
4. Acceptance method: Party A shall organize relevant professional and technical personnel in the same industry to conduct acceptance and write an acceptance report;
5. The acceptance fee shall be borne by Party A..
Article 13 The guarantee period is _ _ _ _ _ _ (year/month). During the warranty period, if any defect in service quality is found, Party B shall be responsible for rework or take remedial measures. Except for problems caused by improper use and storage of Party A. ..
Article 14 Force Majeure
Force majeure as mentioned in this contract refers to unforeseeable, insurmountable and unavoidable objective events that have a significant impact on one party, including but not limited to natural disasters such as floods, earthquakes, fires and storms, and social events such as wars, turmoil and government actions.
If the contract cannot be performed due to force majeure, the party with force majeure shall immediately notify the other party of the accident in writing. And shall provide the details of the accident and the written information of the inability to perform the contract or the need to postpone the performance within _ _ _ _ _ _ _ _ _ _ years.
Article 15 Notice
1. All notices to be issued under this contract, document exchange between both parties and notices and requirements related to this contract must be in written form and can be delivered by _ _ _ _ _ _ _ (letter, fax, telegram, face-to-face delivery, etc.). ). If the above methods cannot be delivered, you can take the form of announcement.
2. The mailing addresses of all parties are as follows: _ _ _ _ _ _ _ _.
3. If one party changes its notice or mailing address, it shall notify the other party in writing within _ _ _ _ _ days from the date of change; Otherwise, the uninformed party shall bear the corresponding responsibilities arising therefrom.
Article 16 Handling of disputes
1. This contract shall be governed by and interpreted in accordance with the law.
2. Disputes arising from the performance of this contract shall be settled by both parties through consultation, or mediated by relevant departments; If negotiation or mediation fails, it shall be settled in the following _ _ _ _ _ _ _ way:
(1) Submit to _ _ _ _ _ _ _ Arbitration Commission for arbitration;
(2) bring a lawsuit to the people's court according to law.
Article 17 Interpretation
The understanding and interpretation of this contract should be based on the purpose of the contract and the original intention of the text. The title of this contract is only for the convenience of reading and shall not affect the interpretation of this contract.
Article 18 Supplement and Annex
Matters not covered in this contract shall be implemented in accordance with relevant laws and regulations. Where there are no provisions in laws and regulations, both parties may reach a written supplementary agreement. The annexes and supplementary agreements of this contract are an integral part of this contract and have the same legal effect as this contract.
Article 19 the validity of a contract
This contract shall come into effect as of the date when both parties or their legal representatives or authorized representatives sign and affix their official seals. The validity period is _ _ _ _ _ _ _ years, starting from _ _ _ _ _ _ _. The original contract was made on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Entrusting party (seal): _ _ _ _ _ Service party (seal): _ _ _ _ _
Person in charge (signature): _ _ _ _ Person in charge (signature): _ _ _ _ _
Bank of deposit: _ _ _ _ _ Bank of deposit: _ _ _ _ _ _
Account number: _ _ _ _ _ Account number: _ _ _ _ _ _
Guarantor of the entrusting party (seal): _ _ _ _ _ Guarantor of the service party (seal): _ _ _ _ _ _
Address: _ _ _ _ _ _ Address: _ _ _ _ _ _ _
Person in charge (signature): _ _ _ _ Person in charge (signature): _ _ _ _ _
Bank of deposit: _ _ _ _ _ Bank of deposit: _ _ _ _ _ _
Account number: _ _ _ _ _ Account number: _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signing place: _ _ _ _ _ Signing place: _ _ _ _ _ _
3 Relevant clauses of model contract of technical agreement:
★ 3 copies of technical agreement contract model
★ 4 copies of model technical cooperation agreement
★ Classic technical agreements, contracts and model essays.
★ 3 Model contract of technical training agreement.
★ 3 samples of technical consultation contract agreement.
★ Complete collection of model contracts for technical agreements
★ 3 model technical entrustment contracts
★ 3 model technology use contracts
★ 3 copies of the project technical cooperation contract model.
★ Three demonstration contracts for technical confidentiality agreement.