The first step is to close the main water inlet of floor heating.

Turn off the water before you work, or you can't work.

Step 2, remove the floor heating pipe mouth.

There is a water inlet above and a water outlet below, which are all one-to-one correspondence. Unscrew the screw with a wrench.

Step 3, clean the floor heating pipe with a pulse floor heating cleaning machine.

There should be a sewage bucket on this side of the outlet pipe. Remember.

Step four, clean up the scene.

Connect the inlet and outlet pipes back, clean up the dirty water in the sewage bucket and open the main water inlet valve.

The cleaning agent you mentioned is not clean at all, and it was not used in high technology before. Pulse therapy is simple and convenient now. The principle of pulse cleaning machine is to inject cleaning liquid and gas into waterway in stages. Under the action of compressed gas, the medium cleaning liquid produces an air explosion effect, which violently washes the scale and scale in the waterway to achieve the purpose of dredging, thus restoring the original diameter of the mold waterway and increasing the flow and velocity of hot water.