1, check whether the material specifications are consistent with the performance of the mixer, and those beyond the allowable range shall not be used. 2, check the idle running before work, check the steering of the mixing drum or mixing blade, the operation of each working device, brake confirmed normal rear can operate. 3. Pay attention to safety during operation (1). When feeding, it is forbidden to put your head and hand between the hopper and the rack to check or explore the feeding situation. During the operation, it is not allowed to wait until the material enters the mixing drum before pulling it out. (2) When the hopper rises, it is forbidden to work or walk under it. A bucket pillow should be set at the bottom of the pit, and the bucket chain must be fastened when cleaning the pit. (3) All the original concrete in the mixer must be discharged before new materials can be added, and the materials are fed at the operation station (except the reverse unloader). It is not allowed to stop halfway or start the mixer at full capacity. 4. Precautions after operation (1). After operation, the mixer should be thoroughly cleaned. If the operator needs to enter the cylinder for cleaning, he must cut off the power supply and assign special personnel to monitor outside, otherwise he should remove the fuse and lock the brake box before entering. (2) After the operation, the inclined bucket should be lowered into the foundation pit. If it needs to be lifted, the chain should be fastened.
Detailed information of Technical Specification for Safe Operation of Concrete Mixer can be found in Zhong Da Consulting and Design, and all relevant building construction materials you want are available.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd