Legal basis: Request for instructions on the equivalence between online monitoring data of boiler flue gas and manual monitoring data In order to improve the monitoring efficiency and technical level of pollutants discharged from boilers, the national emission standard "Emission Standard of Atmospheric Pollutants for Boilers" requires that a single boiler with a newly built capacity of 14mw (20t/h) must be installed with fixed continuous monitoring from March 1 day, 2000. Therefore, according to the requirements of Emission Standard of Air Pollutants for Boilers and Technical Requirements and Detection Methods of Continuous Monitoring System for Flue Gas Emission from Stationary Pollution Sources (HJ/T76-200 1), the continuous monitoring instrument for boiler flue gas and sulfur dioxide emission meets the technical requirements of the instrument and has passed the inspection. The measured data are valid and can be used for environmental protection management. When there is any objection to the data measured by the above instruments, the method specified in Emission Standard of Air Pollutants for Boilers should be adopted for checking.