The maintenance of the mask machine is divided into the following aspects: the maintenance of pneumatic system, ultrasonic system, transmission system, electrical system, appearance, etc., and the power supply needs to be turned off during the maintenance.
1, pneumatic system
The air filter cup of the mask machine needs to be checked for water leakage, and the air compressor should also drain water by the way. In areas with high humidity, the air compressor should be drained every day, and all air pipes and cylinders should be checked for air leakage, the orientation of the cylinder anti-magnetic sensor and whether it works normally.
2. Ultrasonic system
Check whether the ultrasonic mask machine system is kept clean, especially the ultrasonic box, vibrator (transducer) and welding head need to be cleaned without water, and the connecting wires need to be fastened. Always check the wear degree of ultrasonic welding head, and pay attention to the changes of voltmeter and ammeter pointers on the ultrasonic box.
3. Transmission system
The transmission system includes motor, gear, reducer, sprocket, chain, conveyor belt and other components. We need to check whether there is dust and other things attached to the motor, whether the gears and sprockets are oiled, if there are attachments to be cleaned, whether the chain is tight or not, whether there are foreign bodies that have not been cleaned, whether the connecting screws between the transmission parts are loose, and whether the lubricating oil of the reducer is sufficient, generally at 1000-.
4. Electrical system
Check whether the connector of the mask machine circuit is loose, whether the main power line and branch signal line are worn and aging, whether the electrical equipment is loose, whether the electrical box is kept in a dry environment, and whether the exhaust fan works normally.
Step 5 show up
Masks are used to wear on the face, and medical masks need to enter the operating room. Therefore, the production of masks must require the cleanness and neatness of mask machinery and equipment. After work every day, people need to be arranged to clean the workbench and the plates with masks after turning off the power. Be careful not to use water to clean the equipment, and use non-toxic and volatile cleaning liquid such as alcohol to clean the equipment.
6. Rust prevention
The equipment must not be stuck with corrosive liquids and objects. Sweat can easily lead to rust of equipment parts. If the equipment does not run for a long time, it is necessary to coat the transmission system of the mask and the parts prone to rust with antirust oil.
That's what Bian Xiao shared today. I hope I can help you.