abstract
1. General situation of regional society, economy and environment
(1) Community, city and region
(2) The present situation, industrial category, structure and main resources of the park.
(3) Existing problems and analysis
2. The necessity and advantages of park construction
(1) Necessity
(2) favorable conditions
3. Planning objectives and principles
(1) Overall goal
(2) Specific objectives
(3) Planning principles
4. Overall design of the park
(1) Analysis of existing construction conditions
(2) the overall framework of eco-industrial park (including major industrial chains)
(3) Spatial layout and functional zoning of eco-industrial parks
(4) Industrial development planning of eco-industrial park
5. Analysis of industrial metabolism in the park
Metabolic analysis of (1) main substances
(2) Energy flow analysis
6. Park construction projects
(1) List and description of park construction projects (including industrial projects, infrastructure, service facilities, etc.). )
(2) Guide to Park Construction Projects
7. Investment and benefit analysis of the park
(1) Total investment
(2) Financing channels
(3) Economic, social and environmental benefits
8. Organization and safeguard measures
(1) Leading Group of Management Committee (Coordination Office) of Investment Development Corporation
(2) the management system of the park (if it is to transform the existing park, it must be combined with the management system of the existing park)
(3) Encouragement policies (land policy, tax policy, subsidy policy, credit policy, sewage fee refund, etc.). )
(4) Support system (such as information system, new technology development, business incubator, environmental management system, cleaner production audit, etc.). )
Annex III:
Provisions on the naming and management of circular economy demonstration zone (for Trial Implementation) 1. In order to promote the development of circular economy in China, promote the construction of circular economy demonstration zone (hereinafter referred to as "demonstration zone"), standardize the procedures of declaration, examination and approval and management of demonstration zone, and give full play to the role of demonstration zone construction in improving urban and regional environment, reducing waste emissions and greatly improving the utilization rate of resources and energy, these Provisions are formulated.
Second, the circular economy demonstration zone as mentioned in these Provisions refers to the demonstration zone with pollution prevention as the starting point, material circulation as the feature, and social, economic and environmental sustainable development as the ultimate goal, so as to maximize the utilization efficiency of resources and energy and reduce pollutant emissions. Demonstration areas generally carry out pilot projects and demonstrations in provinces and cities.
Three, the demonstration area construction should follow the principle of "reduction, reuse and recycling" ("3R" principle). The principle of reduction requires less input of raw materials and energy to achieve the established production or consumption purposes, and the principle of reuse requires that products and packaging containers can be used as many times as possible in the initial form to avoid flooding in disposable goods. The principle of recycling requires that the products produced can be recycled or recycled as much as possible after the use function is completed, and the recycling of products and wastes must be carried out without causing new environmental pollution.
Four, these Provisions shall apply to the declaration, planning and demonstration, approval and naming, supervision and management, organization and implementation of the demonstration area.
Application 5. The construction of the demonstration area shall be applied by the construction unit to the provincial environmental protection department and submitted to the State Environmental Protection Administration after examination.
Six, the demonstration area declaration conditions are:
1. Establish leading institutions and relevant working institutions;
2. Regional economic construction has certain regional representativeness and demonstration in the whole country;
3. The circular economy at the enterprise, regional and social levels has been typical or embryonic;
4. It is possible to form a circular economy model of "resources-products-renewable resources" or build a circular society in the whole economic activities and the whole society;
5 have a good level of social, economic and environmental development, and have the basic conditions for building a demonstration area in terms of economic development, environmental protection and social progress.
Seven, demonstration area declaration should be submitted to the construction unit application report, including the basic situation of the region, the significance of establishing a circular economy zone, basic ideas, basic conditions, expected goals, construction content and schedule.
Planning preparation and demonstration. After the application for the establishment of the demonstration area is approved by the State Environmental Protection Administration, the construction unit of the demonstration area may organize the preparation of the demonstration area plan (including the preliminary feasibility study report of important projects when necessary).
Planning work should be entrusted to units with experience in planning demonstration areas.
Nine, the planning should be compiled according to the "Circular Economy Demonstration Zone Planning Guide" formulated by the State Environmental Protection Administration, focusing on the overall thinking, construction content, key projects and safeguard measures of the demonstration zone construction, so that the planning can guide the construction practice of the demonstration zone.
Ten, after the completion of the demonstration area planning, the construction unit of the park shall submit the draft plan to the provincial environmental protection department, which shall report it to the State Environmental Protection Administration after review.
The State Environmental Protection Administration organized an expert committee to demonstrate the planning. Eleven, the expert committee should be composed of domestic famous experts in industrial ecology, circular economy, environmental protection, urban and regional planning and related industries.
12. Expert argumentation includes field assessment, listening to planning reports, asking questions, discussing and commenting, and forming expert argumentation opinions. The expert committee focuses on demonstrating the significance of the demonstration area construction, whether the construction conditions are mature, whether the construction objectives are clear and reasonable, whether the construction content meets the requirements of circular economy, whether there are feasible projects, whether effective safeguard measures are put forward, and whether it has national demonstration effect.
Thirteen, the demonstration area planning through expert review, the construction unit should be built according to the plan. After a period of pilot construction, the construction unit may apply to the provincial environmental protection department for naming the demonstration area and report it to the State Environmental Protection Administration.
After applying for naming, the construction unit of the demonstration area shall submit the following materials:
1. Draft for planning approval revised according to experts' opinions (including preliminary feasibility study report of important projects if necessary);
2. Expert opinions;
3. Background description of the establishment of the demonstration area;
4 demonstration area construction organization list;
5. The local government has given or intends to give preferential policies and supporting measures to the construction of the demonstration area.
Fifteen, the State Environmental Protection Administration to review the submitted materials, and report to the State Administration for approval. To meet the requirements of the applicant, approved as a circular economy demonstration zone, and awarded a unified standard logo.
Sixteen, the demonstration area naming format: demonstration area name+"circular economy demonstration province (city)".
Seventeen, the demonstration area construction under the leadership of the local government established leading institutions, according to the approved planning content and time. If it is necessary to make major adjustments to the construction project, it shall be reported to the State Environmental Protection Administration for approval.
Supervision and management. The construction unit of the demonstration area shall report the development and existing problems of the demonstration area to the State Environmental Protection Administration every quarter, and report the annual summary at the end of the year. The State Environmental Protection Administration publishes the latest information on the development of the national circular economy demonstration zone in the form of Circular Economy and Eco-industry Newsletter. Circular economy and eco-industrial communication are organized by the National Cleaner Production Center.
Nineteen, the State Environmental Protection Administration organized an expert group to regularly evaluate and inspect the demonstration area, and commend and reward outstanding achievements.
Twenty, the demonstration area in the following circumstances, the State Environmental Protection Administration instructed it to make rectification within a time limit, after rectification within a time limit still does not meet the standards of revocation of its name:
1. The construction organization and management of the demonstration area are poor, and the development trends of the demonstration area cannot be reported in time;
2. The key enterprises in the demonstration area have seriously violated the national environmental protection laws and regulations, and the pollutant discharge is not up to standard;
3. Failing to promote the construction of the demonstration area in accordance with the requirements and objectives of the planning of the demonstration area, and failing to report the major adjustment of the construction project of the demonstration area in time, resulting in the lag of the construction of the demonstration area or the effect is not obvious.
Twenty-one, the State Environmental Protection Administration is responsible for coordinating and promoting the national circular economy pilot work, organizing the formulation of demonstration zone planning guidelines, organizing the formulation of circular economy development index system, and guiding the construction of demonstration zones around the country.
22. The National Cleaner Production Center, as the technical support unit for the construction of the demonstration area, assists the State Environmental Protection Administration in providing technical guidance, supervision and inspection on the construction of the demonstration area, studies the progress of circular economy at home and abroad, and regularly publishes information on the development of circular economy throughout the country.
Twenty-three, the competent administrative departments of environmental protection of provinces, autonomous regions and municipalities directly under the Central Government shall, in accordance with the unified requirements of the State Environmental Protection Administration, coordinate and guide the construction of demonstration areas and environmental supervision and management within their respective jurisdictions, organize the preparation of the overall plan for the construction of demonstration areas in conjunction with relevant local departments, promote the construction of demonstration areas, and actively cooperate with the local people's governments to implement the plan and introduce relevant preferential policies and support measures.
Twenty-four, the local people's government where the demonstration area is located can provide the following support for the construction of the demonstration area:
1. The construction of the demonstration area should be incorporated into the local national economic and social development plan, as an important strategic measure to adjust the regional economic structure and promote industrial upgrading, and be carefully organized and implemented to ensure the realization of the construction objectives;
2 according to the relevant national industrial policies, combined with the actual situation in the region, formulate local laws and policies to promote the rapid and healthy development of the demonstration area;
3 is conducive to the development of the demonstration area management system, mobilize and organize relevant departments to support the construction of the demonstration area;
4. Create a good investment environment to facilitate the introduction of technology, talents and funds in the demonstration area;
5. Relying on the voluntary behavior of enterprises, organizing the construction of demonstration areas according to market rules;
6. Carry out publicity and training on circular economy and establish incentive policies and measures.
Twenty-five, enterprises in the demonstration area should be in accordance with the basic principles of circular economy, in business activities, in accordance with the "3R" principle, have the responsibility to take measures to control the use of raw materials, recycling products and wastes that can be used, and rationally treating and disposing of products that cannot be used in the end.
Twenty-six, the demonstration area construction unit shall, in accordance with state regulations, take necessary measures to ensure the recycling of resources. According to the planning of the demonstration area, the construction projects in the demonstration area will be implemented by stages, adhering to the principle of taking enterprises as the main body and guiding and promoting by the government, and establishing the construction, management and service operation mode in line with the market mechanism; Formulate the corresponding management system; Assist enterprises to establish healthy organizations and industrial chains among enterprises, and complete the construction of demonstration areas with high standards.
Annex IV:
Planning Guide for Circular Economy Demonstration Zone (Trial)
Circular economy demonstration zone (hereinafter referred to as the demonstration zone) is a demonstration zone with pollution prevention as the starting point, material circulation as the feature, and social, economic and environmental sustainable development as the ultimate goal. It uses ecological laws to organize social and economic activities in the region into several feedback processes of "resources-products-renewable resources", trying to control the generation of wastes at the source of production and consumption, recycle the products and wastes that can be used, reasonably treat and dispose the products that cannot be used at last, realize "low exploitation, high utilization and low emission" of material production and consumption, maximize the efficient use of resources and energy, reduce pollutant emissions and promote the environment and economy. I. Basic characteristics of the demonstration area
The demonstration area is richer in content and wider in influence than the eco-industrial park. Its main features are as follows:
1. The demonstration zone is an eco-economic zone in essence, which integrates clean production, comprehensive utilization of resources, ecological design and sustainable consumption, guides the economic activities of human society with ecological laws, and realizes the "win-win" of social, economic and environmental benefits.
2. The demonstration area needs to be guaranteed through the adjustment of macroeconomic policies and the reconstruction of the legal system.
3. The specific activities of the demonstration area mainly focus on the implementation of cleaner production and resource recycling at the enterprise level; Establishing eco-industrial networks among enterprises or industries at the regional level; And establish a waste recovery and reuse system at the social level.
4. The demonstration area emphasizes the material circulation and flow between the primary, secondary and tertiary industries at the regional and social levels.
Second, the guiding ideology and basic principles of demonstration area planning
1. Guiding ideology
From the perspective of sustainable development, the development of circular economy should be combined with the development of regional comparative advantages and the improvement of market competitiveness to promote the fundamental transformation of social and economic production and consumption patterns.
2. Basic principles
The planning and establishment of the demonstration area follows the behavioral principle of "reduction, reuse and recycling" (that is, the 3R principle).
(1) reduction principle. It is required to reduce the quality of materials entering the production and consumption process, that is, to meet the established production or consumption demand with less raw materials and energy input, so as to save resources and reduce pollution at the source of economic activities. In production, products are often required to be small in size and light in weight, and product packaging pursues simplicity rather than luxury and waste; In life, reduce people's excessive demand for goods, so as to achieve the purpose of reducing garbage emissions.
(2) reuse principle. Require products and packaging to be used many times in the original form. In production, manufacturers are often required to use standard sizes for design, so as to replace only parts without replacing the whole product, and at the same time encourage the development of remanufacturing industry; In life, people are encouraged to buy reusable items, beverage bottles and packaging.
(3) the principle of circulation. It is required that the products produced can become available resources after completing the use function, rather than useless garbage. There are usually two ways to recycle materials. One is to recycle resources to form the same products as before, and the other is to recycle resources to form different new products. The principle of recycling requires consumers and producers to buy products with a large proportion of recycled materials, so that the whole process of circular economy can be closed.
Among the above principles, the reduction principle belongs to the input method, which aims to reduce the quality of materials entering the production and consumption process; Reuse principle is a process method, aiming at improving the utilization efficiency of products and services; The principle of recycling is an export method, which reduces the terminal treatment load by turning waste into resources again.
The importance of that 3R principle is different. The fundamental goal of circular economy is to systematically avoid and reduce waste in economic process, and reuse and recycling should be based on the total source reduction of economic process.
Third, the planning steps of the demonstration area The planning of the demonstration area can be divided into the following steps:
1. Set up a planning team: set up a planning team, including leading institutions and technical institutions.
2. Current situation investigation: mainly investigate and analyze local natural conditions, socio-economic background and major environmental problems; Analyze the characteristics and main problems of the existing economic operation mode.
3. Determination of construction objectives: According to the indicators in the construction index system of the demonstration area (see below), put forward the overall objectives and specific objectives of circular economy construction, and quantify them as much as possible to facilitate assessment.
4. Scheme design: including overall framework design and industrial development planning (including eco-industry, eco-agriculture, recycling service industry, recycling industry, etc. ), urban infrastructure construction planning, ecological landscape construction planning, key implementation project screening, detailed project planning, laws and regulations formulation, and supporting system design.
5. Investment and benefit analysis: including the investment budget and social, economic and environmental benefits analysis of the demonstration area construction.
Fourth, the hardware construction of the demonstration area.
The hardware construction of the demonstration area is embodied in the specific project implementation, mainly concentrated in the enterprise, region and society. Circular economy at the enterprise level requires the realization of clean production and the minimization of pollution discharge; Circular economy at regional level requires the establishment of industrial ecosystem or eco-industrial park between enterprises to realize waste exchange between enterprises; The circular economy at the social level requires waste reuse and recycling, and material circulation is carried out during and after product consumption. The construction contents of demonstration areas in different regions are not necessarily the same. The following is a general introduction to three aspects:
1. Building a recycling enterprise
2. Building an eco-industrial park
Based on the theory of industrial ecology and circular economy, the existing industrial parks are classified and guided, and ecological industrial parks are built to enhance the grades and competitiveness of existing economic and technological development zones and high-tech development zones, and to guide the transformation of old industrial zones. It can include the following aspects:
(1) Establishing Eco-industrial Economic Development Zone
Transform the existing economic and technological development zones and high-tech development zones with the concept of eco-industry. According to the concept of circular economy, the new development zone is planned as a whole and the enterprises entering the park are selected, and a reasonable industrial and product chain network is constructed to realize the optimal combination of industrial structure in the park.
(2) Using circular economy to guide the transformation of old industrial areas.
Introduce the concept of circular economy into the transformation of old industrial areas, and gradually establish new forms of industrial organization to guide the transformation, structural adjustment and product adjustment of old industrial areas with circular economy.
(3) Economic transformation in resource-exhausted areas
In resource-exhausted areas, we should adjust the product structure of resource mining enterprises, establish eco-industrial networks, develop secondary resources, cultivate new economic growth points and promote economic transformation under the guidance of the concept of circular economy.
3. Building a resource recycling society
Establish a classified recycling system for municipal solid waste and other wastes, a recycling system for urban and regional reclaimed water, an eco-industrial system and an information system, and initially build a recycling society.
The construction scope of circular economy involves not only the secondary industry, but also the primary industry and the tertiary industry. For the primary industry, it is required to scientifically use chemical fertilizers, pesticides, agricultural films and feed additives, improve planting and breeding techniques, realize high-quality and harmless agricultural products and recycle agricultural production wastes, and prevent agricultural environmental pollution.
It is forbidden to use toxic and hazardous wastes as fertilizers or for land reclamation. Establish industrial links between industry and agriculture to form a new ecological industry. For the tertiary industry, catering, entertainment, hotels and other service enterprises are required to adopt energy-saving and water-saving technologies and equipment conducive to environmental protection, and reduce or not use consumer goods that waste resources and pollute the environment. Garbage classification and recycling create conditions for recycling. Construction projects should adopt energy-saving and water-saving building design schemes, building decoration materials, building components and equipment that are conducive to environmental and resource protection. Construction waste is minimized and reused. Consumers should establish the concept of green consumption, consciously participate in the recycling activities of renewable resources, and promote the establishment of a circular society. In the construction of circular economy demonstration zone, we should consider the primary, secondary and tertiary industries as a whole, plan the material circulation and energy flow within and between the tertiary industries in a unified way, and form a coordinated and optimized relationship between human activities and the natural environment in the region.
Verb (abbreviation of verb) Software construction in demonstration area 1. Design of legal and regulatory support system
(1) Establish a legal system for developing circular economy.
Formulate local (city, province) circular economy development regulations and related implementation rules.
(2) Formulate preferential policies to promote the development of circular economy.
Formulate preferential policies and other economic incentives in finance, taxation, investment, land, sewage fee refund and other aspects; Encourage the construction projects in the circular economy demonstration zone to participate in the examination and approval of infrastructure and technological transformation projects; Further increase the sewage treatment fee and collect the garbage treatment fee, so that the operation of sewage treatment plants and garbage disposal sites can reach the level of capital preservation and low profit. Formulate economic policies to encourage recycling and reuse of waste. Formulate policies to clarify the responsibilities and obligations of producers and consumers.
(3) Formulate policies to encourage green consumption and green procurement.
Green consumption is the internal driving force for the development of circular economy. Establish a government green procurement system, giving priority to the procurement of recycled products and enterprise products that have passed the cleaner production audit and passed the ISO 1400 1 certification, as well as certified environmental label products; Pay attention to saving in use, reuse it many times, and recycle waste office supplies. Through the exemplary role of the government, guide social groups and enterprises to actively participate in green consumption activities.
2. Design of technical support system
The technical support system of circular economy includes environmental engineering technology, waste resource utilization technology and cleaner production technology. It is necessary to focus on the development or application of key connection technologies of eco-industry, such as municipal solid waste recycling technology, reclaimed water recycling technology, industrial waste recycling technology, biochemical connection technology, etc. Energy cascade utilization technology; Develop and apply secondary resource development technologies such as comprehensive utilization and deep processing of bulk industrial wastes such as coal gangue, establish eco-industrial technology research and development bases, and promote high-tech industrialization.
Index system for the construction of intransitive verbs demonstration area
The demonstration area shall be planned and constructed according to the following four types of index system:
1. Economic development indicators
2. Characteristic indicators of circular economy
3. Eco-environmental protection indicators
4. Green management indicators
Seven. Compilation of planning text of demonstration area
The following are the basic contents of the planning text of the demonstration area, which should be emphasized, added, deleted and adjusted according to the actual situation:
abstract
1. General situation of regional society, economy and environment, main economic, social and environmental problems and analysis.
2. Necessity and advantages of construction
(1) Necessity
(2) favorable conditions
3. Construction objectives and principles
(1) Overall goal
(2) Specific objectives
(3) Construction principles
4. Overall design
(1) Overall framework of circular economy construction
(2) Main logistics, energy flow and element metabolism
(3) the first, second and third industry cycle plan
5. Industrial development planning
(1) Eco-industrial Development Plan
(2) Eco-agricultural development planning
(3) development planning of circular society
6. Urban infrastructure construction planning
7. Ecological landscape construction planning
8 key construction projects and analysis, project list
9. Construction investment and benefit analysis
(1) Total investment
(2) Financing channels
(3) Economic, social and environmental benefits
10. Laws, regulations and policies
(1) laws and regulations
(2) Encouraging policies
1 1. Organization and safeguard measures
(1) Leading Group, Implementation Group and Expert Group
(2) Safeguard measures (such as information network, new technology development, intermediary organizations, publicity and education, environmental management system, cleaner production audit, etc.). )
12. The number of the national eco-industrial demonstration park named after the acceptance is called the approval number. The approval time is 1. Suzhou Industrial Park National Eco-industrial Demonstration Park Environment and Development [2008] No.9 March 2008 3 1 2 Suzhou High-tech Industrial Development Zone National Eco-industrial Demonstration Park Environment and Development [2008]. No.9, March 3, 2008 1 3, Environment and Development [2008] No.9, March 3, 200814, Environment and Development of wuxi new district National Eco-industrial Demonstration Park [2010] No.46, April 20/KLOC-0. 5 Yantai Economic and Technological Development Zone National Eco-industrial Demonstration Park Environment and Development [2065433 Shandong Environment and Development [20/kloc-0] No.47 20 1 April 00 Shanghai Xinzhuang Industrial Zone National Eco-industrial Demonstration Park Environment and Development [20/kloc-0]103 No.20/kloc-0 On August 26th, 0, 8 Rizhao National Eco-industrial Demonstration Park, Economic and Technological Development Zone, Huanfa [20 1 0] No.6543313520165438+2910/ 0 zhangjiagang free trade zone national eco-industrial demonstration park and Yang Zijiang international chemical industrial park environment and development [20 10]No.135 2010165438+2910/65438/kloc. . 12.5 15 Environment and Development of Nanjing Economic and Technological Development Zone [2012] No.35 2012.3.1916 National Ecology of tianjin binhai hi-tech industrial development area Huayuan Science and Technology Park. 158 No. 2012.12.2617 Shanghai caohejing emerging technology development zone environment and development [20 12] 158 No.2012.18 Shanghai Chemical Industry Economic and Technological Development Zone. 25th 20 13.2.6 19, environment and development [20 13] No.25 Linyi Economic and Technological Development Zone Environment and Development [2013] No.25 2013. 145 No.2014.10.122 Environment and Development of Nanjing High-tech Industrial Development Zone [20 14] 145 No.20/kloc-0 145 No.2014.10.124 Environment and Development of Qingdao High-tech Industrial Development Zone [20 14] 145 No.20/kloc-0 145 No 2014.10.13. The number of the national eco-industrial demonstration park approved for construction is called the approval number. The approval time is 1. National Eco-industrial Demonstration Park-Guigang Tongxan [200 1] 170 No.200 1, August 14, 2 Nanhai National Eco-industrial Construction Demonstration Park and South China Environmental Protection Science and Technology Industrial Park [200 1] No.293. Kloc-0/October 29th, 3rd102 April 200318 April 4th Changsha Huangxing National Eco-industrial Construction Demonstration Park Circular [2003]115 April 29th, 2003 5 Shandong Lubei Enterprise Group Circular [2003] Kloc-0/October 18 6 Fushun Mining Group Co., Ltd. Circular [2003 144] April 2, 20051Japan Baotou Steel Ecological Industrial Park Circular [2005] No.536 February 8, 2005 1 1. Kloc-0/2 Qingdao Xintiandi Venous Industrial Park Circular Letter [2006] No.30 Qingdao High-tech Zone [2007] No.65438+066 May 2007 16 Kunming High-tech Industrial Development Zone Environment Development No.75 August 25, 2008 17 Xiaoshan Economic and Technological Development Zone Environment Development [2008] October 7th 18, Shanghai Zhangjiang High-tech Park Environment Development [2066 Environment and Development of Wenzhou Economic and Technological Development Zone [20 10] 104 No.20 1 0 August 26th, An High-tech Industrial Development Zone Environment and Development [2010]/. 0 August 26th Environment and Development of Hefei High-tech Industrial Development Zone [2010] 65438+2010 September 20th 24 Environmental Development of Chongqing Yongchuan Gangqiao Industrial Park [20 10] 129 No.20106544 20 10165438+1October 4, 26 Environment and Development of Zhengzhou Economic and Technological Development Zone [20 10] 129, 20 165438+27 years/kloc Kloc-0/0114128 October Dongying Economic and Technological Development Zone No.20 10 No.2010/25 February 29 Nantong Economic and Technological Development Zone Environment and Development [20655 20 10 12.25 No.30 Zhuzhou hi-tech industrial environment development zone [20 10] 149 No.20 10 12.25 No.31Ningbo National. No.49 20654333 Environment and Development of Wuhan Economic and Technological Development Zone [20 1 1] 122 2011June 10 36 Environment and Development, Hangzhou Economic and Technological Development Zone [20/KOOC-0//KOOC-0/]/KOOC-0/22 No.20/KOOC-0//KOOC-0/June/KOOC-0/037 Environment and Development of Guiyang Economic and Technological Development Zone [20/KOOC-0//KOOC-0/] April 20021Changzhou National High-tech Industrial Development Zone Environment and Development [2012] No.64 2065438+May 30, 2002 4 2 Guangzhou Nansha Economic and Technological Development Zone Environment and Development [2012] No.64 2065438+May 30, 2002 48 Kloc-0/2]63 44 Environmental Development of Zhaoqing High-tech Industrial Development Zone [20 12]14 No.20 1 2 September 3 45 Environment and Development of Tianjin Port Bonded Zone and Airport Economic Zone [2013] No.24 February 6, 2003 46 Environment and Development of Shenyang High-tech Industrial Development Zone [20 13] No.24 2003 49 Environment and Development of Qingdao Economic and Technological Development Zone [2013] No.26 2065438+February 5, 2003 50 Environment and Development of Jiangsu Wujin High-tech Industrial Development Zone [2013] 26th, 2065438+February 5th, 2003, 5 1, Environmental Development of Changchun Economic and Technological Development Zone [20 13]465433 2065438 54 Environment and Development of Nanjing Jiangning Economic and Technological Development Zone [20 13]53, 20 13. 8 55 Yancheng Economic and Technological Development Zone Environmental Development [20 13] No.53 April 20 13/8 56 Lianyungang Economic and Technological Development Zone Environmental Development [20 13] No.53 Environment and Development [20 1 3] No.20/. 8 59 Shanghai Qingpu Industrial Park Environment and Development [2013]158 201312060 Kunshan High-tech Industrial Development Zone Environment and Development [20 13] 158 205