Summary of Technician's Personal Business Work (1) As a technician, my job orientation is to assist the technical director and constantly enrich myself. In participating in the construction project, while completing the material plan and foundation construction survey and setting out, we also assist the technical director to prepare the construction plan and technical disclosure, be responsible for the guidance and arrangement of engineering technical data, conduct on-site quality inspection with the builder, and assist the safety officer to implement, supervise and inspect the safety work on the construction site. The following is a summary of my work.
First, accumulate experience and implement it in the end.
The work on the construction site has made me deeply understand that the knowledge I have learned by looking through the norms and procedures must be implemented in the actual operation process, and there can be no meaning of accommodating. For me, this is a great experience and lesson, because this is a new technology, not only for me, but also for our whole project department. After studying the relevant codes and regulations, we have a clear understanding of the method of acid-resistant conversion and the temperature, humidity, curing time, paste technology and the proportion of furan mortar during construction, and we immediately organize relevant personnel to carry out construction. Due to the selected team,
In addition, the construction period was tight at that time, and there was no time to contact the professional anti-corrosion team. In addition, the weather was cold at that time, and the temperature needed for sticking acid-resistant bricks was above 150℃. We didn't take corresponding heat preservation measures, and the curing time was not less than 14 days. Party A put it into use after 7 days, so that all the acid-resistant bricks fell off in a large area in less than one month, and all of them were reworked later. If we had adhered to the principle and signed a written agreement with Party A, our losses would have been reduced to a minimum. As a technician in charge of the desalting station project at that time, I had certain responsibilities. It is too heavy for me to buy my own construction experience with the benefits of the company like this, so I must demand myself with a rigorous work attitude, and the technical content cannot be mixed with any lucky ingredients. Only in this way can you stand firm in your post.
Second, technical disclosure can not be ignored.
As the work instruction of the construction team, technical disclosure requires technicians to do it well before the construction process begins, but I didn't do it well. I haven't done common construction techniques such as steel bars, formwork and concrete pouring, and only pay attention to those with special requirements. But with the continuous study and understanding in the work, I have a deeper understanding of technical disclosure. As far as technical disclosure is concerned, I don't simply write disclosure to the construction team.
However, after the written disclosure is completed, the workers should be tracked and inspected in the actual construction process. Patiently explaining and guiding the workers who fail to follow or completely follow the technical disclosure work is one of the quality policies of "keeping the process under control" required by our company, and it is invisibly linked with the quality inspector, so as to fully realize the invisible team spirit of "division of labor and cooperation" of professionals in the construction process, which will be used in future work.
Third, strengthen management ability and assist in safe production.
Scenes of bloody facts and shocking data have pushed the safety production of the construction industry to the peak. We must attach importance to safety in production, and safety work is not only the responsibility of full-time safety officers. Everyone of us should be nervous about production safety, especially technicians. When writing safety technical disclosure, you can't slack off just because it's not your job. Write carefully, actively cooperate with the management of safety personnel, and increase management efforts. As we all know, safety management. The most important thing is to establish a sense of security. First of all, the managers of the project department must have a strong sense of safety and responsibility. Only when the managers of the project department truly realize the importance of safety can they do this job well.
If the management of the project department is lucky enough to do this work, it will be a fatal hidden danger for the safe construction of the project. For the labor service team, the first thing to do is to arrange a safety education and training after the workers enter the site, and at the same time make safety technical disclosure to the labor service construction team.
The engineering construction work has made my professional knowledge grow and deepen, and my work ability, including organization and coordination ability, management ability and contingency ability, has been greatly improved. More importantly, I have gained valuable work experience. In my future work, I will meet new challenges with a hundred times enthusiasm, make progress and maturity in my study, constantly spur myself, enrich my energy, improve my quality and professional level, so as to adapt to the development of the times and enterprises and make progress and growth together with the company. Contribute to the development of the company.
Summary of Technician's Personal Work (II) Over the past year, with the correct leadership and help of the company's leaders and the care and support of my colleagues, my ideological understanding, working ability and comprehensive ability in all aspects have been improved and improved, and all the tasks in my work have been successfully completed. Although I will experience some difficulties, it is a rare exercise opportunity for me. I feel that I have a deeper understanding of my work.
First, strengthen theoretical study and improve personal quality.
As a technician, if you want to complete your job responsibilities, you must first have professional skills and quality. During this year, I seriously participated in various studies and activities, constantly strengthened my theoretical knowledge and learned new industry norms. Yes, as a young employee, I will be careless in my work, which seems rough and inappropriate. When there are opinions and suggestions, I will accept them with an open mind. Set higher demands on yourself and try to tell yourself: think about how to do better from another angle.
Second, work hard and try to do your own essential work.
Strictly implement the company's rules and regulations at work, pay attention to safety in production, earnestly perform the duties of a Yongtai employee, and conscientiously implement all the work arranged by the leaders. At work, I will learn from others' strengths with an open mind, and I will be strict with myself at ordinary times and do things in an informal way. After I finish my work, I often sit with my experienced colleagues to discuss and exchange their experiences and discuss the problems found in my work. Through the discussion among colleagues, I can get a lot of knowledge from them that I can't learn from books, which is the essence of their years of practical work. During this period, I learned a lot of work skills.
Third, the work content
I am mainly responsible for the technical problems on site, such as measuring and setting out, construction according to drawings, checking whether the construction meets the requirements of specifications, proposing amendments and corrections to the problematic places, and cooperating with each team of the company. Later, I will assist the company leaders to settle the project, which is of great significance. I will personally go to the site to measure and calculate every item assigned by the leader to ensure the accuracy of the data. Later, the leader transferred me to the company to assist the management manager in making xx materials. Making materials is a challenge for me, because I have been doing technology and don't know much about materials. At first, I made some simple electronic documents, and then I began to modify the inspection lot, arrange and bind the drawings, review the process, etc., and I learned a lot about the materials.
Four. Shortcomings and prospects
I know I still have many shortcomings, such as lack of experience and theoretical level to be improved. In the future, I will constantly improve myself, consciously strengthen my study, learn professional theoretical knowledge, learn from my colleagues around me, learn from each other's strengths, and gradually improve my theoretical level and practical operation ability. Strictly abide by the company's rules and regulations, unite colleagues, and complete the tasks assigned by the leaders on time.
In short, state of mind determines state, and state determines success or failure! Responsible for the company, persistent in work, enthusiastic about colleagues and confident in yourself! I hope to grow rapidly next year and make greater contributions to the company!
Summary of Technician's Personal Business Work (III) My name is xxx, and I am currently the Minister of Quality and Technology. During my work, I worked hard to learn professional technical knowledge, constantly learned new processes, new materials and new technologies in the process of technical management, and devoted myself to scientific and technological innovation and progress. The professional and technical work is summarized as follows:
I. Work attitude and responsibilities
Since joining the work, I have abided by the company's rules and regulations, actively obeyed the work arrangement of the leaders, successfully completed the work tasks, and conscientiously implemented the relevant national standards and regulations. Attach importance to the study of business knowledge, actively take advantage of opportunities such as attending training courses to listen to the guidance of experts, consult experts to learn, and improve business ability. Closely around their own work priorities, actively learn new knowledge of relevant national standards, and strive to combine with reality. In practical work, we should combine professional knowledge with new technical knowledge, broaden our thinking, enrich ourselves, and strive to adapt to the requirements of our work in the new situation and new standards. Conscientiously do their own work and routine work, establish and improve various rules and regulations, maintain a good working order and working environment, and make various management more standardized and standardized.
Ready-mixed concrete production is a linkage organization. From raw materials entering the factory, to the quality control of mixing process and the quality release procedure of concrete before leaving the factory. Find the fluctuation of concrete quality at any time and adjust it in time, and adopt practical methods to ensure concrete quality. Over the past few years, I have been diligent, pragmatic and efficient in my work, constantly self-motivated, self-motivated, always strict with myself, consciously abide by relevant national standards and regulations, and truly implement the relevant standards, testing methods and regulations of raw materials and concrete that I am responsible for testing in this post, so that every test can be based on laws, work properly, and have made certain achievements.
Second, the specific work
In the relevant work experience of concrete engineering, I first engaged in the detection of raw materials, and later engaged in the research of concrete admixture and concrete quality control. Basic knowledge of concrete transportation, pouring, curing and concrete quality inspection, and independent preparation of concrete special construction scheme and related technical disclosure work. He also has a deep understanding of concrete mix ratio and concrete crack control, and is gradually exploring mass concrete and special concrete. Composite concrete admixture has been used for 2 years, and new technologies, new processes and new materials have been repeatedly demonstrated and tested through mixing and small sample trial.
Three. Professional study and training
In order to better adapt to the current technical management work, and strive to do their own work. I attach great importance to continuing re-education and learning, and have participated in technical training organized by various departments for many times, and obtained post qualification certificates such as quality inspector, builder, safety officer, documenter and test inspector.
Because the company is in the development stage, most employees of the company have never been exposed to the concrete industry before. Although they can operate the equipment to complete the production after training, they still lack the basic theoretical knowledge about concrete. Our department will conduct targeted technical training for personnel from other departments from time to time. For example, explain the concepts of performance indexes such as workability, slump and sand ratio to the computer room, as well as the important role of each index in construction and the formation of concrete strength.
Let it consciously control and debug the equipment in the production process, so that the produced concrete meets the construction requirements and quality requirements. Explain to ministry of materials and equipment the routine acceptance criteria of raw materials such as sand and gravel cement and the handling principles of questionable materials; The forecourt is the end point of our whole production process, so we should further strengthen communication with the site, explain and convey the conventional indicators such as slump, workability and sand ratio of concrete to the pump workers on site in time, and ensure the final quality of concrete.
In short, with the care of leaders and the support and help of colleagues, I have made some achievements through continuous efforts. However, I am soberly aware that in order to adapt to the new situation of green concrete development and production, we need to constantly strengthen theoretical study, especially the study of new technologies, theories and standards, work hard, exercise and grow in practical work, accumulate work experience, improve our professional ability and work level, and contribute to urban development and construction.
Summary of Technician's Personal Business Work (IV) In the past year, as a technical cadre with engineering construction experience in xx Engineering Office, I participated in the technical work of several construction teams of steam turbine specialty in part or in whole. It was in this busy and fulfilling year that I tested my original engineering knowledge and deepened it under the unique conditions of xx project, and on the other hand, I initially built my own professional knowledge system. The following is a summary of my work.
I. Overview of work
The technical work that I am personally responsible for can be roughly divided into several time periods from the key points of phased construction. At the beginning of the year, I was the only technical cadre in the whole steam turbine team because the major projects of xx Company were in the critical period of construction. As a technical cadre of steam turbine team, I am responsible for the technical work of all teams of steam turbine specialty. At the same time, the compilation plan of "xx Construction Atlas of Steam Turbine Specialty" is also a time-pressing, huge and extremely important work.
Later, he was mainly responsible for the daily construction technical work of Class One and Class Two and the unfinished phased construction tasks in the early stage. During this period, I was mainly responsible for the installation of xx and other projects. Later, my technical tasks began to be gradually stripped off, and the tasks of the second class of the pipeline were completely delivered to the newly transferred technical cadres, and the tasks were reduced. Now, I have begun to take over the installation technical tasks of two steam-driven feed pumps, and my professional skills have entered a new stage to cope with the new tasks. So far, my work focuses on the installation of two steam-driven feed pumps, the installation of temporary steam pipeline purging and the improvement of all steam-water pipeline systems responsible for the first-class pipeline construction.
Second, work understanding
I have always despised the engineering and technical work I am engaged in. After all, these works have mature construction experience to learn from, and there are many engineers and technicians like me who are engaged in this work together. But I take a cautious attitude in working methods and strategies, because from the working practice of these systems, I can accumulate and learn valuable experience from the working details. I regard every job given to me by the team leader as a valuable opportunity to accumulate personal work experience. It is my work goal to complete the task successfully, and it is my work attitude to try my best to solve the construction problems. I participated in every project construction task that I was responsible for, and fully controlled the construction points of unit projects and sub-projects
Third, work experience.
As an employee of a modern large enterprise, as an engineer and technician in a new era, I not only work hard, but also constantly sum up and improve. The conventional construction technology has long been firmly in my mind, and the new problems and difficulties encountered in the construction process are the focus of my summary. When the project is busiest, it is impossible to solve everything on the same day every day, so I will classify these things and deal with them in a planned way.
I corrected all my shortcomings and mistakes in time, but I adopted the method of dealing with the fait accompli, analyzed the reasons from my shortcomings and mistakes, summed up the experience and lessons, and made them my wealth.
I have been demanding myself as an excellent engineer and technician, and I have improved myself because of this requirement. The glory of the company needs our efforts to create, and personal development needs our own efforts to achieve. For these lofty goals, I have been making unremitting efforts and striving hard. In the future work, I will continue to guard against arrogance and rashness, work hard, closely unite with everyone in the company's big family, realize the company's take-off with my brilliant youth, and write my own chapter with no regrets.