1. Shut down the server: firstly, ensure that Inspur server is shut down and disconnected from the power supply;

2. Connect the hard disk: connect the hard disk to the hard disk slot of Inspur server correctly, ensure the connection is stable and tighten the screws to fix the hard disk;

3. Start the server: connect Inspur server to the power supply and start the server;

4. Enter the BIOS setup: during the boot process, press the specified key (usually DEL, F2, F 10 or ESC) to enter the BIOS setup interface of Inspur server;

5. Navigate to the hard disk settings: in the BIOS settings interface, use the arrow keys or designated keys to navigate to the "hard disk" or "storage" option;

6. Select hard disk: select the hard disk to initialize. Multiple hard disks may be displayed, please make sure to select the correct hard disk;

7. Initialize: Initialize the selected hard disk. This can usually be found in the BIOS setup interface with "Initialize" or "Format" options. Select this option and follow the instructions on the screen;

8. Save the settings and exit: After the initialization is completed, save the settings and exit the BIOS setup interface. When the Inspur server is newly started, the initialization process of the hard disk should have been completed.