1, design embroidery patterns, also known as plate making. People who do this work are called plate makers. The plate maker designs the pattern through embroidery plate-making software (Wilkum, Tadao software, etc.). ) and save them to the computer hard disk.

2. The platemaker found the embroidery pattern file and opened it, then changed the computer recognition. EMB suffix file into. DST file and save it as a copy to USB flash drive. (The computerized embroidery machine can only recognize. DST file)

3. Insert the U disk containing the embroidery file into the U disk interface of the computer embroidery machine, and click the "Input Disk Pattern into Memory" button on the control panel of the embroidery machine. Complete the pattern input.

4. Positioning: Move the embroidery frame up, down, left and right until the embroidery position is appropriate, and then click the "Embroidery Confirm button" to determine the embroidery origin.

5. Enter the embroidery color, choose manual or automatic color change, and pull the control lever to the right to start embroidery after confirmation.

Expand:

Water soluble lace is a big category of embroidery lace. It uses water-soluble nonwovens as the base fabric and viscose filament as the embroidery thread, which is embroidered on the base fabric by computer Ping Xiu machine, and then melted by hot water treatment, leaving three-dimensional lace.

Water-soluble plate-making does not require many stitches, and the most commonly used ones are "flat needle" and "flat bag needle", and almost no stitches such as "tatami" and "E-shaped needle" are used. The importance of "plain stitch" in water-soluble printing plate is self-evident, and the success of a water-soluble printing plate depends largely on the proficiency of individuals in using "plain stitch".