Summary of numerical control internship to full employment 1 Through this internship, I have made process analysis and programming for typical parts, and I can master the programming of more complex parts skillfully. Proficient in the operation of CNC system, and can process and debug on CNC machine tools. Can correctly handle the related problems in processing and operation. The internship experience is summarized as follows.
First, the understanding of the internship
Soon we will step into the society and face employment. The employment unit will not tell us the work to be done in detail like the teacher, but we need to observe and learn by ourselves. Without this ability, it is difficult to be competent for future challenges. With the rapid development of science and the wide application of new technologies, there will be many fields that we have never touched. Only by daring to try can we make a breakthrough and make innovations. Just like the lathe worker we contact, although it is very dangerous, it needs every student to operate and make finished products, so as to exercise everyone's courage to try.
Second, the internship content
Familiar with the machine tool operation panel composed of CRT display and operation keyboard. Its common keys are complex, but they are very important for the completion of the work in the CNC workshop.
After clamping the cutter, workpiece and cutter, drive the spindle to rotate and move the tool rest until the workpiece tries to cut a section of excircle. Then keep the X coordinate unchanged, move the Z-axis tool away from the workpiece and measure the diameter of the excircle. Input the corresponding tool parameters into the tool length, and the system will automatically subtract the excircle diameter from the current X coordinate of the tool, that is, get the X origin position of the workpiece coordinate system. The specific operation needs continuous efforts during the internship.
Machining: firstly, determine the machining process and route according to the requirements of drawings, and write a program, then input the compiled program into the numerical control system and check it carefully, clamp the workpiece after confirming it is correct, and then align the tool. After tool alignment, you can call up the program, press the auto and run buttons, close the protective door, and let the machine tool process automatically. At the same time, the operator can't leave the machine tool and handle the wires with special tools. If there is any abnormality in the machine tool, please press the emergency stop button immediately to prevent damage to the machine tool and injury to the operator.
Third, internship experience
Through this internship, we learned about the production mode and technological process of modern machinery manufacturing industry. Familiar with the main molding methods and processing methods of engineering materials, the working principle and typical structure of the main equipment used, the use of fixtures and measuring tools and the safe operation technology. Understand the knowledge of mechanical manufacturing process and the application of new technology, new technology and new equipment in mechanical manufacturing. Have preliminary independent operation skills in the main molding and processing methods of engineering materials. In the process of understanding, being familiar with and mastering certain engineering basic knowledge and operation skills, we have cultivated, improved and strengthened our engineering practice ability, innovation consciousness and innovation ability.
This internship made us understand that we should be careful and not careless. At the same time, it also cultivated our strong and unyielding nature, and never gave up perseverance until the last second! We have cultivated and exercised our own views on labor, quality and economy, strengthened our awareness of observing labor discipline, safety technical regulations and caring for state property, and improved our overall comprehensive quality. During the whole practice, the teacher was very strict with our discipline, formulated the rules for students' practice, and at the same time strengthened the requirements of cleaning the machine tool site and observing the safety operation rules of various types of work, which played a very good role in promoting the cultivation of students' comprehensive engineering quality.
The practice of turning around brings us not only the operational skills we have been exposed to, but also the ability to exercise through several types of work. More importantly, we need each of us to feel, reflect, work hard, encourage ourselves and gain something after practice, so that this practice can achieve his real purpose.
Summary of NC probation work 2 Time passed quickly, and the three-month internship period ended in an instant. First of all, I would like to thank the company leaders for giving me this opportunity to work and study. You have continued my dream of further development.
During this time, you have given me too much tolerance, support and help. While thanking you, I am also surprised to be a member of XXX company! In these two months, under the care and guidance of leaders and colleagues, through my unremitting efforts and previous work in the same industry, I have adapted to the living and working environment here and gradually entered the working state. My work during this period is summarized as follows:
1. I have been working as a CNC machine tool repairman in the technical department since I joined the company. During this period, there were good performances and mistakes, especially in machine tool maintenance. Because I am not familiar with the equipment, lack of work experience, and the equipment here is quite complicated, the repair process is slow, which delays the production of the workshop. But by learning from some experienced colleagues, I gradually improved in my later work, and I could learn from them what I couldn't learn elsewhere, so they became my mentors and friends.
2, strengthen the theoretical and professional knowledge learning, not only improve their comprehensive quality, strictly perform their duties, and strive to do their job. Since I entered the company, I quickly mastered and became familiar with the requirements and skills of this position, and basically followed the basic system and workflow of the company.
3, practice strict economy, put an end to waste. Be loyal to your duties and keep secrets. As we are a newly established company, as the saying goes, "Everything is difficult at the beginning", and I think our company is no exception, so we should pay attention to economy. We should implement economy in every detail of our work and start with small things. Our technical department now has procedures, such as spare parts purchase list and consumable application list. We are a service-oriented enterprise, and our customers are military units. Therefore, we must strictly keep secrets and ensure that we do not reveal any secrets of our customers.
From the probation period, I have completely entered the work role and really stood in this position. During this period, I have the opportunity to use my previous study and work experience to solve and deal with problems, and also have the opportunity to discover my own shortcomings and gain new knowledge, which urges me to combine what I have learned in books with theoretical viewpoints and make progress in my study.
Through this period of work, I also found many problems: there are still many places to learn and improve in my work, and I need to constantly recharge, improve myself and make progress. Less work experience, less things to see, and sometimes the analysis of the problem is not thorough enough, which may easily lead to some deviations between the problem and reality. Careless and meticulous work, impetuous, easy to make some mistakes that should not be made. In the future work, I will always pay attention to my own shortcomings, strive to overcome, correct, carry forward my advantages, ask questions with an open mind and not be ashamed to ask questions. Constantly improve their working ability. Successfully complete the tasks of the technical department and the company.
Here, I apply for becoming a regular employee. Create value for the company and look forward to creating a better future with the company!
Summary of NC probation period confirmation work III. In this semester, the members of the CNC teaching and research section, guided by the construction concept of "modern vocational education, ecological campus and humanistic feelings", took the "year of effective operation" of the new campus as an opportunity, closely focused on curriculum reform, and focused on improving teachers' teaching quality and scientific research ability, effectively carried out teaching and research activities and actively completed various education and teaching work in the school, and achieved certain results. The work of CNC teaching and research section in the past six months is summarized as follows:
I. Main Work and Achievements
1. Seriously carry out the routine and complete the teaching tasks.
Strengthen teaching management, do a good job in initial teaching, daily teaching and mid-term teaching inspection, correctly evaluate the quality of classroom teaching, listen to each other, evaluate each other, help each other and improve each other, and teachers' teaching ability and teaching level are greatly improved. Young teachers have made rapid progress, showing outstanding performance in theoretical teaching, practical teaching and teaching and scientific research, which plays a vital role in the completion of the work tasks of the teaching and research section.
In this semester, when there is a big shortage of teachers, teachers are brave enough to shoulder heavy responsibilities. Teachers' teaching workload is full, and they have completed theoretical teaching and practical teaching, and completed the graduation project of Grade 06, which has won favorable comments from schools and students.
2. Carry out teaching and research activities as planned to improve the level of teaching and scientific research.
This semester, the teaching and research section carried out teaching and research activities as planned. This semester, * * * teachers published 4 papers, all of which were published in provincial excellent journals, and 8 teachers opened school-level public classes; In addition, all the teachers participated in the research work of the project, and the school-level project "Research and Practice on the Construction of School-level Excellent Courses of CNC Machining Technology" has passed the mid-term evaluation and is actively preparing for the conclusion. Many teachers participated in the research of Industry-University-Research project and achieved fruitful results. Also established a school-level excellent course "CNC machining technology". In the process of active construction, members of the teaching and research section actively participate in the construction of excellent courses, which further improves the teaching and research level of teachers.
3. Actively participate in professional construction and improve the level of professional construction.
This semester, we actively carried out professional construction, seriously discussed the talent training scheme for CNC major, completed the formulation and implementation of the implementation scheme in combination with the actual situation of the school and the characteristics of regional economy, further understood the background and talent training mode of professional construction, made clear the connotation of professional construction, and discussed the deepening of teaching reform, improving teaching quality, enhancing professional characteristics, ideas and measures for curriculum system development, and the construction of professional teaching team, which improved the awareness and level of teachers' professional construction.
4. Actively carry out curriculum construction to improve teaching quality.
This semester, we strengthened the construction of curriculum group, organized all teachers to participate in the "Five Courses" competition in the school, attended lectures and evaluated courses, and won the second prize in the "Five Courses" teaching and research activities organized by the school. Actively promote the construction of test questions bank, and have initially built a basic test question bank of mechanical and electrical English and quality management and control technology, which condenses and sublimates teachers' teaching methods, teaching means, teaching experience and professional knowledge.
5. Carefully organize skills training and achieve the best results in history.
This semester, four teachers in our teaching and research section undertook the task of cultivating outstanding talents. They give up rest, care about everyone, organize students to train hard, and are not afraid of strong players in the competition. They have achieved excellent results: the first prize in the national competition 1, the first prize in the provincial competition 1, the second prize in the provincial competition, and the third prize in the provincial competition. Two teachers served as the training coaches of Jiangsu National Games, and contributed to the first place in Jiangsu National Games. This semester, four teachers actively applied for "Three Innovations" tutors, and devoted themselves to cultivating high-quality workers with noble professional ethics and pioneering and innovative spirit to create a new Jiangsu.
6, Industry-University-Research, brilliant achievements.
Actively promote the development of Industry-University-Research, and won the first prize 1, the second prize 1 and the third prize1in Jiangsu Vocational Education Innovation Competition; 20xx has many teachers actively applying for innovative works, and some progress has been made.
7, study hard, social practice, improve the professional ability of teachers.
Under the correct leadership of the department, the teaching and research section organizes teachers to learn the operation and social practice of various numerical control equipment and software, which improves teachers' professional practice ability and pays attention to the cultivation of young teachers. Many teachers take part in all kinds of training at all levels to improve their professional level.
8. Ensure the safe and effective operation of the new campus.
This year is the first year of the new campus operation, and many things are in the running-in period. The safe operation of the new campus is the biggest problem facing the school. All the teachers in the CNC teaching and research section have made great efforts to maintain the safe and effective operation of the new campus, actively do a good job in teaching routine, strengthen the management of experimental training equipment and teaching, and ensure the normal operation of experimental training in accordance with teaching requirements. Through everyone's efforts, all the teachers in the teaching and research section have successfully completed all the teaching, scientific research and comprehensive work in this school year, and their abilities have been greatly improved.
9. Actively participate in activities to create a civilized city.
In the activity of creating a civilized city, the teachers of the CNC teaching and research section actively responded to the call of the school and the city and devoted themselves to the work of creating a civilized city. Teachers take to the road, act as traffic volunteers and cooperate with traffic police to maintain traffic order; Into the classroom, into the canteen, into the dormitory, with their own words and deeds education infected teachers and students, so that everyone can participate in the creation of a civilized city. Through everyone's unremitting efforts, the inspection team gave our school a high evaluation.
Second, the main problems
Over the past six months, our teaching and research section has done some work and achieved certain results. However, there are also many difficulties and problems in the work of the teaching and research section, mainly including:
1. This semester's teaching tasks are very heavy, especially the four teachers are engaged in the task of cultivating outstanding talents, unable to undertake enough teaching tasks, resulting in an increase in the workload of all teachers and unable to complete the teaching tasks. Just by increasing the number of foreign teachers, the teaching quality and actual effect are not ideal because of the lack of adequate assessment of foreign teachers.
2. There are still some shortcomings in the teaching level of CNC teaching and research section, and the proportion of associate professors and graduate students is low, which is inconsistent with the requirements of provincial demonstration majors.
3. There is a lack of quantity and quality in the papers written by the members of the teaching and research section.
Third, improvement measures.
1, further strengthen the quality management and monitoring of the teaching process, equip each external teacher with an assistant teacher, and require external teachers to participate in teaching and research activities.
2, continue to promote the reform of teaching and examination methods, improve the teaching effect, broaden students' professional knowledge and skills, improve students' interest in learning.
3. Teachers are required to strengthen the contact with enterprises, which is not only conducive to connecting with the reality of enterprises in teaching, but also conducive to writing high-quality papers. Every teacher in this teaching and research section is required to complete a high-quality paper every academic year.
In the future work, our teaching and research section will conscientiously sum up experiences and lessons and make continuous progress.
Numerical control internship summary 4 CNC course, the focus of teaching and training in this semester mainly comes from the following aspects:
First, clarify the purpose of teaching and training.
The basic purpose of arranging NC training is to make students familiar with the basic manual programming methods of NC lathe or NC milling machine (machining center), the machining operation methods of typical parts and conventional processes, and initially master the precision inspection and maintenance skills of NC machine tools, reaching the intermediate level or above.
Second, carefully organize and do a good job in practical teaching.
1. Selection of training materials
I write a training plan with existing equipment to adapt to students' study.
4. High starting point design training objectives.
This semester, I trained with plastic sticks and wooden blocks. During the training, good students let them work with steel, so that students can feel the difference in metal processing. The difficulty of training topics is designed according to intermediate workers. I will ask them to complete their tasks in each training class. Basically, everyone can hand in their own processed products in each class, so that they will have a sense of gain, learn consciously and work hard to complete the task.
3. Selection of materials
In order to save the cost of practical teaching, we first use large materials, and the process is from simple to complex, and gradually reduce the materials, that is, we can learn the content of this lesson by using the artifacts completed in the last lesson, thus saving the cost.
Third, the effect of practical teaching.
Practical training is the most important teaching link in vocational education, and the level of practical ability directly affects students' employment. After the training course, students generally feel that not only their practical ability has been improved unprecedentedly, but most of them have basically mastered the basic operation of CNC machine tools. More importantly, through concrete practice, we can further stimulate students' interest in professional knowledge, realize the combination of theory and practice, and lay a solid foundation for their future employment and development.
Fourth, the existing problems
After the end of this semester, I made a serious summary and feedback. Most students are satisfied with the training we arranged. The experimental teacher's evaluation is also good, but students generally report some shortcomings. According to our current situation, we currently have:
Teachers should be strengthened.
At present, we only have two practical teachers, which is far from meeting the needs of teaching.
2. Students did not organize professional theoretical knowledge training before practice class, which increased the difficulty of practice teaching and wasted some practical operation time.
3. The task of training teachers.
Vocational schools should emphasize professionalism and technicality, so practical training is an important part of vocational teaching, and school leaders also attach great importance to practical teaching, which greatly promotes the smooth progress of practical teaching in our department. As the concrete implementers and participants of practical teaching, practical teachers play a huge role. And the workload of practical teaching is also large. According to the actual situation of the equipment, it is appropriate to use 10 people for CNC machine tools. This can better ensure the teaching effect.
4. Organize teachers to go out for training.
Vocational colleges are mainly professional teachers. If teachers go to training, they will become by going up one flight of stairs and sublimate. Just like the maintenance of CNC machine tools, machine tools must be maintained for a certain period of time. Many teachers don't have this knowledge. Using holidays to organize study and training will not delay teaching.
Verb (abbreviation of verb) the direction of future efforts and measures to be taken
This semester's practical teaching has accumulated a lot of experience for me, which provides good wealth for the next semester's work, and also enables students to have corresponding professional basic knowledge before practical training. In the future, my practical teaching will be organized more carefully, professional knowledge will be further accumulated, and teaching will be further developed.
Personally, I have always adhered to the concept of continuous learning, so that I can be better qualified for my job.
The five-year summary of the probation period has passed quickly, and one semester will be over. Looking back on this semester's work, we have gained a lot, gained a lot of valuable experience, and are full of infinite expectations for the future. Now let me sum up the half-year work of our accounting teaching and research section:
First, the teaching work of this semester:
1, completed the teaching task of this semester.
According to the teaching plan of the college, we assigned the teaching tasks for this semester. According to the situation of freshmen, we have made a training plan for 20xx freshmen. Every week, the teachers in our accounting teaching and research section discuss innovative teaching methods at the weekly activity meeting, and the teachers listen to each other and learn from their respective advantages. By the end of the year, we have successfully completed the teaching tasks and teaching plans arranged by the college.
2, the daily management of teaching and research section
Standardize daily teaching management and establish a long-term mechanism for teaching inspection and evaluation and improving teaching quality. The teaching and research section requires all teachers to prepare lessons carefully and teach in strict accordance with the schedule and syllabus. Teachers' personal teaching materials, such as curriculum outline, lesson preparation notes, class schedule, handouts, test papers, etc. , are standardized and complete. All the teachers in our teaching and research section have adopted multimedia teaching. Arrange, correct and comment on homework in time. The routine inspection and special inspection in teaching are persistent, which can sum up the gains and losses reflected in the inspection in time. A feedback mechanism has been initially formed, but the reward and punishment mechanism has not yet been established. Due to the heavy task of teachers in class, the implementation of the listening and evaluation system is not in place.
3. Teaching guidance for freshmen.
Our college welcomed 20xx freshmen this year. How to make them enter the university study state in time, have a general understanding of their major and have a plan for students?
We can have a general plan. According to the requirements issued by the leaders of the college and the teaching and research section, every part-time head teacher in charge of freshmen will come to the class in person during the evening self-study to explain the relevant situation of professional courses to freshmen and guide them to make plans for their future study and life.
4, strengthen the construction of teachers' morality, teachers pay attention to teaching and educating people.
According to the spirit of the school, the teaching and research section should actively carry out the education of teachers' morality and style, and require every teacher to actively participate in the education and training of students. Teachers should not only impart classroom knowledge, but also pay attention to the improvement of their own quality and the cultivation of professional quality. Teachers should care and guide students in many ways and be good teachers and friends of students.
5. Pay attention to the improvement of teachers' own quality and improve the level of scientific research.
This semester, teachers are required to keep learning to ensure the improvement of their own quality. Old teachers should further improve their knowledge structure on the original basis. Young teachers should strengthen the research of professional knowledge, enrich their teaching experience, learn from old teachers, and learn their professionalism and teaching skills. Constantly improve their teaching level.
Second, in education and scientific research:
(1) set up "the construction of on-campus training system for accounting computerization specialty".
In the new semester, the teachers in the teaching and research section of our college have set up the topic of "Construction of on-campus training system for accounting computerization specialty", and have integrated the construction of training system into the new talent training scheme.
(2) Show the professional certificate level of accounting computerization.
At the end of the semester, at the request of the college, the contents of the core certificate and the extended certificate were demonstrated for the students majoring in accounting computerization, and a teaching system was established with the accounting qualification certificate as the core certificate and the primary certificate as the guiding direction of the extended certificate.
(3) Formulate the planning and design scheme of the accounting training room in the new semester.
According to the construction plan of the future training building in our college, our college demonstrated the design scheme and area of the future accounting training room, which laid a solid foundation for the construction of the training room next semester.
(4) Completed the college-level professional declaration of accounting computerization.
We successfully passed the selection of college-level majors, and completed the declaration of college-level majors, the summary of professional construction, the curriculum setting of majors and other documents, which laid the construction and development direction for our future college-level professional construction.
Third, the college upgrade work:
1, according to the requirements of college promotion, our teaching and research section has made a reasonable distribution among the teachers in our teaching and research section according to the tasks given by the college. Through the efforts of teachers in the teaching and research section, the teaching plan and syllabus issued by the college in recent three years have been completed with good quality and quantity.
2. I carefully watched the meeting of the 18th National Congress of the Communist Party of China, and organized the teachers in the teaching and research section to have a discussion after the meeting. The teachers all wrote their views on the 18th National Congress.
3. Attend the briefing on the work of Chairman Wang's upgrading from junior college to undergraduate college, organize a discussion among teachers in the teaching and research section, and make a general introduction to the future work tasks of the upgrading from junior college to undergraduate college.
4. Participated in the mobilization meeting of undergraduate promotion held by our college, and organized teachers in the teaching and research section to discuss activities centered on self-dedication, which condensed everyone's unity.
The general direction of future development:
After half a semester of teaching, we have seen our own teaching achievements, but also our own shortcomings. In the future, I think we must always pay attention to the changes of provincial departments' thoughts on educational academics, educational concepts and quality courses, closely follow the thinking of the 18th National Congress of the Communist Party of China on the future development of China society, and keep our educational academics and quality courses in the forefront of the times.
Always pay attention to the updated theoretical knowledge of this major under the new situation and get to know the country in time.
As well as the connotation of innovation in education department, we should better integrate this connotation into teaching, actively carry out the construction and implementation of the on-campus training system of accounting computerization specialty, and perfectly integrate the spirit, theme, connotation and practice course of the training course to form a teaching and education system that conforms to the students' ability and college characteristics of Shandong International Studies University, and constantly grasp the requirements of economic development for theoretical innovation of accounting specialty under the new form. Let our accounting professional knowledge keep pace with the times, so as to better adapt to the requirements of professionals under the new economic situation, and also let us be among the best in the same level colleges outside the mountain.
I think every teacher in our accounting teaching and research section will be strict with himself and contribute to the future of our students and the grand blueprint outside the mountain under the background of realizing the grand goal of upgrading from college to undergraduate, under the correct leadership of leaders at all levels of the college. We fight for it. We fight for it.