Safety education system

1. Before each operation team enters the construction site and officially goes to work, the project department must carry out "three-level" safety education (team education, project department education, enterprise safety management education) for team employees and establish an education record card; If the safety technical disclosure is not clear and comprehensive, and the employee has an industrial accident, the educator or the disclosure person must be held accountable.

2. Safety education at all levels should be targeted, and each team cannot be the same.

3, the project department should often organize cadres to learn about the laws and regulations of production safety, learning norms and standards, learning safety technology operating rules, etc. , through learning to achieve the purpose of mastering and using skillfully.

4. Adhere to the safety activity day every Monday, and each activity should be organized, content-oriented, purposeful and demanding. Generally, we can summarize the safety work last week, put forward and emphasize the measures to do a good job in safety according to this week's work, and also adopt some targeted safety operation procedures; The purpose, content and specific arrangement of safety activities shall be the responsibility of the full-time safety officer of the project department, and the project manager or other management personnel shall not occupy the safety activity day to hold other meetings and carry out other work.

5. Before assigning new employees, three-level safety education must be carried out, the project department should carry out professional safety technical regulations and rules and regulations education, and the team should carry out specific safety education work.

6. The project department must contact the local labor department to conduct safety technical training for special operations personnel who need to hold relevant certificates, and can only take up their posts after obtaining the operation certificate of special operations personnel through examination; Safety education and technical disclosure should still be carried out before taking up the post.

7. When employees change jobs or engage in a second occupation, the project department must conduct safety training and safety laws and regulations study again, and they can only take up their posts after passing the examination.

8. When new technologies, new machines and tools, new equipment, new processes and new methods are adopted in the construction, the project department shall provide operators with operation technical training and safety technical education, and can only operate after passing the examination.

Safety inspection system

Safety inspection is an important means and measure to eliminate hidden dangers, prevent accidents and ensure safe production. In order to continuously improve the production conditions and working environment, so that the working environment can reach the best state. In order to take effective measures to eliminate unsafe factors and ensure safe production, this safety inspection system is formulated as follows:

1. Safety inspection content: check the implementation according to the grading standard of safety inspection on the construction site issued by the Ministry of Construction; Protection of the base groove edge; Construction electricity, safety facilities of construction machines and tools, operation behavior, correct use of labor protection articles, safety and fire prevention, etc.

Second, the safety inspection method:

Regular inspection, surprise inspection, professional inspection, seasonal and holiday inspection and regular inspection.

Three, the project department construction site inspection once a week, organized by the project manager; Each construction team carries out daily inspection, organized by the construction director, and the production team insists on daily self-inspection of the working procedures in their respective environments to eliminate unsafe hidden dangers at any time.

Fourth, surprise inspection:

In the event of heavy casualties, equipment accidents, traffic accidents and fire accidents in the same industry or brother units, in order to learn lessons, preventive measures shall be taken according to the nature and characteristics of the accidents and surprise inspections shall be organized.

Five, professional inspection:

In view of the sudden problems existing in the construction, such as construction machines and tools, temporary electricity consumption, etc. , organize individual inspections and carry out special treatment.

Six, seasonal and holiday inspection:

In view of the climatic characteristics that may bring harm to construction in winter, summer and rainy season, four precautions should be taken in winter, heatstroke prevention and cooling in summer, and flood control in rainy season in advance; Before and after major holidays, it is necessary to do a good job in safety education and implement safety precautions to prevent employees from being lax in discipline and thinking paralysis.

Seven. Regular inspection: safety functional personnel, project management department and safety officer on duty should often go deep into the construction site to carry out preventive inspection, find hidden dangers in time, eliminate hidden dangers and carry out standardized construction normally.

Eight, check out the hidden dangers of accidents:

All kinds of inspections must be careful and meticulous, leaving no dead ends. For the accidents found out, it is necessary to establish an accident hidden danger ledger, fill in an accident hidden danger instruction book for major accidents, and designate a special person to make rectification within a time limit.

Safety technical disclosure system

Strict safety technical disclosure and serious implementation of safety technical measures are important guarantees for implementing the policy of safe production, reducing industrial accidents and realizing safe production. In order to ensure safety in production and run safety through the whole production process, the following safety technical disclosure system is formulated according to the actual situation of this enterprise:

1, before the project starts, the construction director and technical director should organize relevant personnel to formulate detailed safety technical measures according to the engineering characteristics, geographical environment and construction methods, and report them to the relevant technical safety departments at higher levels for approval. The approved safety technical measures have the function of technical regulations and must be carefully implemented.

2. When the project starts, the chief engineer and technical director shall organize the construction project manager, builder, safety officer and team leader to make detailed safety technical disclosure, so that the competent personnel can understand the truth and lay the foundation for the implementation of safety technical measures.

3. Before each single project starts, the on-site project manager shall organize the builder to explain the construction methods and safety technical measures to the actual operation team members in detail, and issue them to the team in writing.

4. The builder shall fill in the safety technical disclosure sheet according to the implementation of safety facilities, equipment and safety precautions of single project safety technical measures, and the person in charge shall implement the signature acceptance system for teams and individuals.

5. The production organizer of the construction site shall not change the safety technical measures without authorization. If reasonable suggestions are put forward, they shall be submitted to the chief engineer for written approval. Before approval, it should be carried out as planned.

6. The safety functional department shall take the technical measures for construction safety, safety regulations and various safety rules and regulations as the criterion, regularly inspect the implementation of the site, and supervise the implementation of various safety technical measures.

Pre-shift safety activity system

1. Before each operation team enters the construction site, the project department must carry out "three-level safety education" for the team members and establish an education record card.

2. The Project Department must sign the responsibility letter for production safety with each operation team leader and employee, and make targeted written safety technical disclosure. Both parties must perform the signing procedures.

3. Before going to work every day, each operation team leader must carry out comprehensive and targeted safety education activities for the employees of his team, mainly emphasizing the safety precautions of the operation that day, checking the wearing conditions of the employees' safety protection articles, and observing and understanding the employees' mood and psychological state that day.

4. Before putting into normal operation, the construction machinery and tools must be inspected twice: first, whether they are installed correctly and whether there are safety protection devices and safety protection measures; Second, check whether its performance is normal, and operate according to the operation procedure of maintenance before operation, especially the machinery prone to accidents, which must be overhauled before shift to check its safety status. If an accident is found, stop the machine immediately for maintenance, and then use it after debugging is normal.

5, all shift alcoholics, are not allowed to enter the construction site; Anyone who doesn't have the qualification to work is not allowed to work.

6. security team activities of the project department must be recorded in writing, signed by the project safety officer, and supervised and inspected by the enterprise safety management department.

Safety duty system

In order to strengthen safety management, eliminate unsafe factors in the production process and weak links in safety management, and implement safety work, according to the actual situation of our project department, the safety production duty system is formulated.