1. When new employees enter the factory, they must receive pre-job training on fire safety. The training contents include: basic knowledge of fire safety, operation and use of fire extinguishers and hydrants, etc.
2. Conduct fire safety training and education for each employee at least once a year, and keep the training records on file.
3. The company conducts evacuation drills for all employees every quarter, and conducts special training for volunteer firefighters in fire drills, so that each team member can skillfully use fire-fighting equipment.
4, the company's fire safety director, fire safety administrator, full-time and part-time fire management personnel, fire control room operators and other related personnel should receive special training on fire safety.
5, electric welding, gas welding, boiler workers and other personnel working in fire danger areas and automatic fire control system operators must undergo fire training and show certificates.
6, each workshop, team and other departments to carry out fire safety education and training should be based on the characteristics of each department, each stage, each word education.
7, the company through various forms to carry out various forms of regular fire safety publicity and education.
2. Fire inspection system
1, establish fire safety responsibility system and post fire safety responsibility system step by step, clarify their respective responsibilities and implement inspection system.
2. The company's security personnel conduct fire inspection on the company every day. The company's safety department and environmental safety department conduct monthly fire inspection on the company, and review and track the improvement.
3. If a fire hazard is found during the inspection, the inspector shall fill in the record and require the relevant personnel to sign the record in accordance with the regulations.
4. The inspection department shall promptly notify the inspected department in writing of the inspection situation, and the person in charge of the inspected department shall timely rectify the fire hazards according to the notification requirements.
5. If the fire hazards found in the inspection are not rectified in time according to the specified time, punishment will be imposed according to the regulations of the company.
Three. Safety evacuation facilities management system
1. The widths of safety exit doors, evacuation stairs and evacuation walkways in workshops, warehouses and dormitories in the factory must be set according to the specifications.
2. All evacuation exits, stairs and walkways must be equipped with corresponding emergency lighting and evacuation signs.
3. When working, the production workshop and warehouse should ensure the smooth export, and the export should not be locked.
4, workshop, warehouse should be stored in accordance with the provisions, shall not block the passage.
5, the head of each department should be in accordance with the provisions, regularly check whether the evacuation signs and emergency lighting facilities are in good condition, found that the damage timely maintenance.
Four. Duty system of fire control room
1. The fire control room adheres to the 24-hour duty system.
2, the operation and maintenance personnel of the fire control room, should be qualified by fire safety training.
3, the personnel on duty shall not leave their posts, should be in strict accordance with the operating procedures.
4, the personnel on duty should be conscientious, if there is a fire accident, should be handled in time according to the relevant plan, and report to the relevant departments.
5, the personnel on duty should record the situation on duty, and do a good job of succession.
6. The personnel on duty should observe the self-inspection of automatic fire alarm system and automatic fire extinguishing system every day, and troubleshoot in time to ensure the normal operation of the system.
Verb (abbreviation of verb) fire control facilities and equipment maintenance management system
1, the company's fire-fighting facilities and equipment are managed by the Ministry of Security, and the fire-fighting facilities and equipment are regularly inspected and tested.
2. Establish file management of fire-fighting equipment and fire-fighting facilities.
3, fire control facilities, fire equipment should be fixed storage, personnel maintenance, regular inspection, and the inspection records on file.
4. Educate the employees of the whole company and ask them to take good care of fire control facilities and equipment. They will demand compensation and punish those who intentionally destroy or damage fire-fighting facilities and equipment.
5. According to the requirements of "Regulations on Fire Safety Management of Organs, Organizations, Enterprises and Institutions", the company sets fire-fighting equipment and facilities such as fire-fighting safety evacuation signs and emergency lighting that meet the national regulations, and keeps the fire-fighting facilities in a normal state.
Intransitive verb fire hazard rectification system
1. The management function of the company's security department conducts a fire inspection on each department once a month, and orders it to limit changes in writing for the problems found, and supervises the rectification in place.
2. The person in charge of fire safety or the fire safety manager shall organize a fire safety meeting once a month to discuss the fire hazards found in the inspection and the corresponding rectification measures to ensure safe production.
3. After receiving the rectification of fire hazards, all departments of the company should promptly urge relevant personnel to implement the rectification measures, and those departments that cannot be rectified at the moment should implement preventive measures to ensure fire safety.
4. After the rectification of fire hazards is completed, the department responsible for rectification or the relevant person in charge shall submit the rectification record to the company's fire safety responsible person or fire safety manager for signature, and file it for future reference after confirmation.
5. For the fire hazards ordered by the public security fire control institutions to be rectified within a time limit, the rectification department of the company shall make rectification within the prescribed time limit, and make a reply for the rectification of fire hazards and submit it to the public security fire control institutions.
Seven. Fire and electrical safety management system
1, the company should strictly implement the fire safety management regulations for the use of fire and electricity.
2. Safety management of electricity consumption: 1 It is forbidden to pull wires at will, which is overloaded. The installation of wires and equipment shall be the responsibility of the certified electrician of the safety machine maintenance department.
3, workshop after work, should turn off the power supply, otherwise the security department will punish those responsible.
4. Private use of high-power electrical appliances such as electric heating rods and electric furnaces is prohibited.
Eight. Fire and explosion prevention management system for inflammable and explosive dangerous goods and places
1, inflammable and explosive dangerous goods should have a special warehouse, equipped with necessary fire-fighting equipment and facilities, and the warehouse personnel must be qualified personnel who have received fire safety training.
2, inflammable and explosive dangerous goods should be classified and stored separately. Flammable and explosive chemicals with conflicting chemical properties or different fire extinguishing methods should be stored separately.
3. Flammable and explosive dangerous goods shall be inspected by the inspection department before storage, and shall be registered before storage.
4, inventory items should be classified stacked storage, each crib covers an area of not more than one hundred square meters, not less than one meter between cribs, the spacing between cribs and walls is not less than 0.5 meters, the spacing between cribs and beams and columns is not less than 0.3 meters, and the width of main passages is not less than 2 meters.
5, inflammable and explosive dangerous goods in and out must be carried out in accordance with the safety operation procedures, warehouse staff should stick to their posts, non-staff to enter.
6. Flammable and explosive places should take fire-proof and explosion-proof measures according to the requirements of fire code, and maintain fire-proof and explosion-proof facilities.
Nine. Organization and management system of voluntary fire brigade
In order to strengthen production safety and fire prevention, and improve the company's self-defense and self-rescue ability, the following system is formulated:
1. Establish and improve the volunteer fire brigade organization, and update and supplement the volunteer firefighters in time.
2. Strengthen the training and education of the obligatory fire brigade, and improve the professional quality of the members. The Security Department is responsible for the professional training, assessment and guidance of team members.
3, workshops, departments, teams and other volunteer firefighters, organize a fire knowledge learning and fire drills every quarter, and record the training files.
4. Volunteer firefighters must be familiar with the basic knowledge of fire prevention and extinguishing; Familiar with the company's fire exits and key parts; Familiar with the use and maintenance of the company's automatic fire extinguishing system and other fire fighting facilities and equipment; Familiar with alarm and alarm handling procedures; Familiar with the organizational procedures and measures of emergency evacuation; Familiar with the procedures of initial fire fighting; Familiar with communication, safety protection and rescue procedures and measures.
X. fire fighting and emergency evacuation planning exercise system
1, the company should strengthen the formulation of fire fighting and emergency evacuation plans, and comprehensively revise the relevant changes of the company every year.
2. The company shall conduct drills according to the fire fighting and emergency evacuation plan, and the drills shall be conducted at least twice a year.
3. When conducting a fire drill, obvious signs should be set up, and the personnel within the scope of the drill should be informed in advance.
4. The contents of the fire fighting and emergency evacuation plan include: organization (fire fighting action group, communication contact group, evacuation guidance group, safety protection and rescue group); Alarm and alarm processing program; Organizational procedures and measures for emergency evacuation; Procedures and measures for extinguishing initial fire.
XI。 Inspection and management system of gas and electrical equipment
1. The installation and maintenance of electrical equipment must be carried out by professional electricians in accordance with regulations. Newly-built, newly-added and replaced electrical equipment can only be put into use after passing the inspection by the competent department, safety maintenance department and environmental safety department.
2, electrical equipment and wiring to regular maintenance, found that the problem timely report, timely treatment.
3. The warehouse where gas is stored shall take fire prevention, explosion prevention and anti-static measures in strict accordance with the requirements of the fire protection code.
4, safeguard section to provide and use the gas department, regular and irregular spot checks, spot check results should be recorded and archived.
5. The company should provide regular education and training to relevant personnel who use gas and electrical equipment, so as to improve the fire safety awareness of relevant personnel.
6. Conduct a comprehensive inspection of lightning protection devices every year. Check the anti-static facilities regularly.
Twelve. Fire safety work assessment and reward and punishment system
1, the company will take the usual drills, business study, daily fire control work and the implementation of rules and regulations as the basis for the assessment, rewards and punishments of all departments and individuals of the company.
2. The company will commend and reward the departments and individuals who have made outstanding achievements in fire safety work every year.
3. Departments and individuals who fail to perform their duties as required will be dealt with accordingly.
4, in violation of fire safety management regulations, causing fire accidents, will be dealt with according to law.
Thirteen. Electric welding fire prevention system
1, welders should be specially trained to master welding and cutting safety technology, and only after passing the examination can they operate independently.
2. Before welding and cutting, the "hot work application" shall be handled according to the regulations, and it can only be carried out after approval.
3. Choose a safe place for welding and cutting operations. Before welding and cutting, carefully check the up, down, left and right conditions, and the surrounding combustibles must be removed. If it cannot be removed, safety measures such as sprinkling water and shielding should be taken to protect it.
4. When welding and cutting in explosive places full of combustible gas or dust, when welding and cutting near these places, a certain distance should be kept in accordance with relevant regulations.
5, welding and cutting operations are not allowed to be in the same place, at the same time, with paint, spray painting, carpentry and other flammable operations.
6, welding machine grounding wire is not allowed to pick up in buildings, mechanical equipment, all kinds of pipes, metal road, metal frame, must set up a special grounding wire, shall not pick up the road.
7. Do not use defective welding tools. Don't let the welding wire touch the gas cylinder.
8, welding and cutting work should abide by the operating rules before ignition, welding and cutting end or leave the scene, must cut off the power supply, gas source, and carefully check the scene, eliminate fire hazards; Welding in concealed places such as stuffy roof and partition wall, and repeated inspection within half an hour after operation to prevent smoldering.
9, welding and cutting site must be equipped with fire equipment, there should be someone on-site monitoring.
Fourteen. "Ten No's" in Workshop Fire Safety Production
1. Smoking is not allowed in the workshop, and open flame operation is carried out without authorization.
2, are not allowed to occupy the evacuation passage.
3. Fences and other obstacles that affect evacuation shall not be set on the safety exits or evacuation passages.
4, are not allowed to be locked or closed during the production work.
5, are not allowed to use fire equipment.
6. Non-maintenance personnel shall not dismantle mechanical equipment without authorization.
7, are not allowed to operate dangerous machines without a license.
8. The faulty equipment is not allowed to be used before it is repaired.
9. Work time is not allowed to go slow, make trouble, fight or leave without leave.
10, barefoot and children are prohibited from entering the workshop.