The main reason is that the case analysis is not good and the technical practice and comprehensive ability are good.

1) Establish the thinking mode of case study.

In the review of the fire engineer exam, it can be said that "the winner gets the fire". Case analysis is the most difficult of the three subjects, and it is also the key subject to decide whether candidates can get the certificate of registered fire engineer. Case study is different from the first two methods of "technical practice" and "comprehensive ability", so it is very important to establish the thinking mode of case study in review. Here are three modules of case analysis:

1) review thinking mode of building fire prevention case analysis

For the building fire prevention of the workshop, according to the nature and quantity of materials used or produced in the workshop production, the workshop is divided into Class A, Class B, Class C, Class D and Class E.. Then, according to the fire resistance rating, the setting requirements of the office (lounge) in the factory building, the layout of the intermediate warehouse, the fire prevention spacing, the layout of the fire lane, and the structural fire prevention (fire doors, walls and floors).

For the fire prevention of civil buildings, it is mainly based on the functions of the buildings (houses, crowded places, children's activities places, song and dance entertainment places, etc.). ) and the classification of buildings (single multi-storey, first-class high-rise and second-class high-rise). From the fire level, fire partition area, building layout requirements, fire spacing, fire lane layout, fire climbing surface and climbing work site setting requirements, structural fire resistance (fire doors, walls, floors, etc.). ), safety evacuation facilities (fire exits, stairwells, evacuation walkways and other forms, locations, widths, distances, etc.). ), and the combustion performance of indoor decoration materials (A, B 65433).

2) By analyzing the application cases of fire-fighting facilities, review the thinking mode.

For the configuration of building fire protection facilities, according to the fire resistance rating of the building (pay attention to distinguish between industrial and civil buildings), from indoor and outdoor hydrant water supply system, automatic sprinkler system (open, closed, dry, wet, pre-action, water curtain and other systems), gas fire protection system, foam fire protection system, smoke control system, automatic fire alarm and linkage system, building fire extinguisher, fire elevator, fire pump, pipeline, fire pool and so on.

For the acceptance of building fire-fighting facilities, based on the setting and functional requirements of each fire-fighting facility, the answers are mainly summarized from the acceptance data, system installation quality and technical inspection requirements, system debugging requirements, functional debugging, linkage debugging, common problems in installation, judgment standards and other knowledge points.

Aiming at the maintenance management and maintenance of building fire protection facilities, this paper mainly summarizes the answers to the questions from the aspects of daily inspection contents, inspection methods and requirements, inspection cycle, annual and monthly inspection items, annual inspection items and requirements, causes of common system failures and treatment methods.

3) Review the thinking mode of case analysis of fire safety management.

For the fire safety management of the construction site, the following knowledge points are summarized: the combustion performance of temporary buildings, the fire prevention distance between temporary buildings and buildings, the setting of temporary fire lanes, the setting of temporary fire rescue places, the plane layout of temporary buildings, the maximum allowable building area of dormitory office buildings, the safe evacuation of dormitory office buildings, the temporary fire water supply system, emergency lighting configuration, fire extinguisher configuration, hot work approval management, fire safety management system on the construction site, fire safety education for employees on the construction site, etc.

For building fire safety management, mainly from the determination of important fire hazards, fire hazard rectification, evacuation exit setting requirements, bag walkway length, automatic fire alarm system and automatic sprinkler system setting, fire hydrant setting in the building, fire elevator front room setting, fire power supply related requirements, fire safety management attribution determination of multi-property civil buildings, fire safety system, fire safety training, fire fighting and emergency evacuation plans and drills, fire files, fire inspection and inspection, fire safety.