1. When working, according to the lighting situation in the office, if the lighting is not turned on in sunny days, or the indoor lighting is insufficient at night or rainy days, the indoor lighting facilities can be turned on according to the actual situation (automatic control); Please turn off the lights and electrical equipment after leaving the room for a long time;

2. In principle, the meeting room should turn on the lighting, projection and other electrical equipment within 0/5 minutes before the meeting, and turn off the electrical equipment in time after the meeting;

3. Bathroom, boiling water room, etc. Turn on the lighting as needed; 22: 00 p.m. Turn off the lighting at 6: 00 the next morning (7: 00 in winter);

4. During work, the corridor turns on the lights according to the light intensity interval, and few people turn on the lights, and no one will close the door;

5, long-term unmanned room, should disconnect all electrical equipment;

6. All electrical equipment in the office should be closed in time after work;

(2), water saving measures

1, regularly check the water equipment to prevent water leakage;

2, to carry out cleaning and hygiene work, should avoid the phenomenon of large area washing;

3. It is forbidden to flood the green space;

(3) Measures to save paper

1, adhere to the principle of "never print if you can't print, try not to print if you can, and print as little as possible if you must".

2, vigorously promote electronic office, reports, notices and other internal circulation documents as far as possible using the network or USB flash drive transmission.

3. Double-sided paper. In addition to official documents, the documents circulated within the unit should be printed on both sides as far as possible; However, paper related to financial, confidential or sensitive information shall not be used again.

4. When printing internal documents, reduce the font appropriately.

Fourth, the margins are narrowed, so that more content can be accommodated on each page.

5. Printing all kinds of documents should be carefully examined to reduce printing errors.

6. Before printing various documents, set the printing area (especially EXCEL forms) and preview it, and then print it after confirmation.

7. One-sided paper that can no longer be printed should not be discarded and used as draft paper.

8. Try to use e-mail and reduce fax paper. Scan paper fax into electronic version and send e-mail, saving paper and telephone charges.

Four, all cadres and workers have the obligation to report the damaged hydropower equipment to the equipment management personnel in time to ensure that the hydropower equipment and facilities are in good condition.

Legal basis:

Regulations on energy conservation of public institutions

Article 5 the State Council and local people's governments at or above the county level shall, jointly with relevant departments at the same level, carry out publicity, education and training on energy conservation in public institutions, and popularize scientific knowledge on energy conservation.

Article 6 The person in charge of a public institution shall be fully responsible for the energy-saving work of the unit.

The energy-saving work of public institutions shall implement the target responsibility system and assessment system, and the completion of energy-saving targets shall be taken as the content of the assessment of the person in charge of public institutions.

Article 7 Public institutions shall establish and improve their own energy-saving management rules and regulations, carry out energy-saving publicity and education and on-the-job training, enhance employees' energy-saving awareness, cultivate energy-saving habits and improve energy-saving management level.

Article 8 The energy conservation work of public institutions shall be subject to social supervision. Any unit or individual has the right to report the waste of energy by public institutions, and the relevant departments shall promptly investigate and deal with it.