As the project department of advanced sewage treatment plant was newly established in July this year, I am responsible for both the equipment management of Jian 'an Branch and the mechanical equipment management of the project department of advanced sewage treatment plant. Since August, he has temporarily served as the head of the safety equipment management department of the project department of the advanced sewage treatment plant. Because there are many jobs in charge, the work pressure and difficulty are naturally great. However, with the care and support of the branch leaders and relevant departments, I tried my best to learn the knowledge of construction machinery and equipment management and hse safety management of project construction, and tried my best to do well the equipment management of Jian 'an Branch and the project department of advanced sewage treatment plant and the hse safety management of the project department of advanced sewage treatment plant. In 2006, the equipment management of Jian 'an Branch and the project department of advanced sewage treatment plant and the hse safety management of the project department of advanced sewage treatment plant achieved good results. My main work in the past year is summarized as follows:
1. Comply with the company's laws and regulations. Over the past year, I have abided by the national laws and regulations and the company's rules and regulations, carried out the relevant instructions of my superiors and the company, and completed my job according to the deployment of the company's production coordination department and branch leaders. At the same time, seriously study relevant business knowledge, and strive to improve their business knowledge and work ability.
Second, the equipment management
Let me start with the basic knowledge (principle) of mechanical equipment and construction machinery. From June 65438+ 10 in 2006 to February 65438+in 2006, I spent two or three hours studying mechanical equipment management almost every night. I consulted nearly 100 related materials such as mechanical design, construction machines and tools, and mechanical schematic diagrams. Learn as much as possible and master some basic knowledge about their performance, maintenance procedures and basic operating procedures. At noon and evening, I spent nearly 63xxxx hours learning the knowledge of mechanical equipment management. While studying, I will apply the equipment management knowledge I have learned to my work practice, which will benefit me a lot. Adhere to the self-defined daily inspection system, and inspect the equipment and construction machinery in use every morning. Check the implementation of operating procedures and maintenance procedures by operators of equipment and construction machinery. And solve the problems found in time.
Over the past year, the specific items of equipment management are briefly described as follows:
1. Check 132 mobile welding machine, 13 1 motor dumper, 105 transport motor vehicle, 7 1 loader, 32 cranes and 163 AC and DC welding machines. 87 problems were found. 87 items passed supervision and rectification. Check the operation and inspection records of equipment and construction tools, and the implementation of equipment management system, equipment operation procedures and equipment maintenance procedures for 25 times. 38 unqualified items were found. Supervise and rectify 38 qualified items. If it is found that there is no hidden danger of braking safety xxxx in motor dumpers, transport motor vehicles, loaders and cranes, it shall promptly issue a notice of shutdown and rectification to relevant departments and personally supervise them until they pass the inspection.
2. Organize a training for the operators of equipment and construction machinery. Train the operators in the management system, operation procedures and maintenance procedures of equipment and construction tools, and fill in the files, operation, inspection and maintenance records correctly. The number of operators participating in the training is 4xxxx.
3. Organize the on-site repair of machines and tools and equipment, and solve the mechanical equipment failure on the construction site in time. Ensure the normal operation of mechanical equipment and construction tools during construction. Put an end to the occurrence of safety accidents during the driving of equipment and construction tools.
4. Carry out dragnet investigation and statistics on the hidden dangers of the equipment and construction machinery being used by the branch company 1xxxx, and eliminate the faults and hidden dangers of mechanical equipment in the bud. Due to the timely elimination of hidden dangers, the auxiliary equipment and construction machinery are ensured to run without safety accidents all year round.
5. Make use of nearly 32xxxx hours at noon and evening, lists and orders of 228 equipment and construction tools, annual equipment purchasing plan, equipment statistics, monthly equipment accident report, equipment maintenance plan, equipment technical performance, equipment maintenance application, etc. Be compiled. The basic information of equipment management of Jian 'an Branch and advanced sewage treatment plant project department has been improved, and the management of equipment and construction tools of Jian 'an Branch and advanced sewage treatment plant project department has been strengthened.
6. Meet and participate in all kinds of equipment, construction machinery management related inspections xxxx, and ensure that all inspections are qualified.
7. In terms of equipment energy saving, I started with Tianjin a9 1369 gas-guzzling Jeep. The fuel consumption of the jeep in Jina91369 is 22 liters (the highest fuel consumption is about 26 liters). After I personally tested it, I judged that the carburetor was faulty, and the carburetor was no longer worth repairing, so I decided to replace it, and the carburetor was replaced. Calculated by driving 100 km per day, it can save 3467.5 liters (93#) of fuel each year, and save 4.5xxxx of fuel cost per liter of 93# gasoline, amounting to RMB1581.xxxx.
8. Strictly pass the entrance inspection and appraisal of special equipment: When the static pile driver of the project department of the advanced sewage treatment plant enters the site, I will conduct inspection and appraisal in strict accordance with the entrance inspection procedures of the construction equipment of the project department of the advanced sewage treatment plant, seriously put forward rectification opinions for unqualified items, order the rectification notice xxxx, and supervise the rectification until the re-inspection is qualified.
9. Strictly control the quality during the installation and acceptance of the concrete mixing station, seriously put forward rectification opinions for unqualified items, order the rectification notice for three times, and supervise the rectification until the re-inspection is qualified, and then go through the acceptance signing and recognition procedures.
In equipment management, timely contact with the competent leader of the branch and the construction operation team leader. Make a reasonable equipment management plan and timetable, and then implement it and achieve good results.
I. Safety management
When I was in charge of the safety management of the project department of the advanced sewage treatment plant, with the correct leadership and help of the project supervisor, I worked hard to learn the knowledge of hse safety management while doing a good job of equipment supervision and management, and applied the knowledge of hse safety management to the practice of the project department one by one, which benefited me a lot.
During the period of being in charge of the on-site hse safety equipment management department, arrange the daily work of the equipment safety management department in strict accordance with the hse equipment safety management work plan compiled by the sewage advanced treatment plant project, and strictly grasp the safety management of the construction site. It ensured that the project department of the advanced sewage treatment plant successfully passed the site acceptance of the third bid section of the group company in 2006. The specific matters I have done are briefly described as follows:
1. Strictly control the entrance and exit inspection of special equipment and the installation and acceptance quality of concrete mixing station. Strictly investigate the potential safety hazards of on-site construction equipment and tools, and nip them in the bud. Ensure that the construction equipment and machinery of the advanced sewage treatment plant run safely all year round without accidents.
2. Organize hse safety management inspection 10xxxx. Check the management system, operation procedures and maintenance procedures, documents, operation, inspection and maintenance records of operators, equipment and construction machinery.
(1) Check 28 motor vehicles, 32 loaders, 8 cranes 18 and 26 construction machines such as AC welding machines. 18 problems found. Supervision and rectification qualified 18 items.
(2) Check the operation and inspection records of equipment and construction tools, and the implementation of equipment management system, equipment operation procedures and equipment maintenance procedures for 36 times. Six unqualified items were found. Supervision and rectification qualified 6 items.
(3) In case of potential safety hazards of special equipment such as pile drivers, transport motor vehicles, loaders and cranes, timely issue a notice of shutdown and rectification to relevant units, and personally supervise them until they pass the inspection.
3. Carry out dragnet investigation and statistics on the hidden dangers of equipment and construction machines and tools, 1xxxx, and eliminate the faults and hidden dangers of machines and tools in the bud. Due to the timely elimination of hidden dangers, the equipment and construction tools of the advanced sewage treatment plant and the project department of Jian' an Branch have been ensured to run without safety accidents all the year round.
4. Meet the inspection of the superior (1xxxx) on hse safety management, and ensure that all inspections are qualified.
5. Adhere to the daily safety inspection system, and check the equipment and construction tools used by the project department and the construction site of the advanced sewage treatment plant at least once a day. Supervise and inspect the hse safety management of the on-site subcontracting team, and coordinate and solve the problems found in time. In the hse safety management of advanced sewage treatment plant, according to the hse equipment safety management work plan compiled by the advanced sewage treatment plant project, the work is arranged reasonably, and the work plan is implemented, which has achieved results.
Although I made some achievements in 2006, there will still be more difficulties and obstacles in equipment management in 2007, and the difficulties still exist. But I am determined that in the new year of 2007, I will work harder and create better results with a newer attitude. Make greater contributions to the equipment management of Luqiao Company.
……