Summary is a comprehensive and systematic review and analysis of learning, work or its completion in a period of time, which can make sporadic, superficial and superficial perceptual knowledge rise to comprehensive, systematic and essential rational knowledge. It is better to act immediately and write a summary. How should I write a summary? The following is my summary of cad training for you, which is for reference only and I hope it will help you.

Summary of cad training work 1 Just one week of CAD training passed quickly. Although I only drew four drawings in a limited time, I still learned a lot in summary.

Many students have gone out for internships, and there are few people in the spacious classroom, which seems a bit desolate. Even though I feel lonely, I still insist on attending classes on time every day. With my love for CAD, I have been trying to draw every picture, think about every detail and draw every step, even a small problem.

Because I have studied CAD for a semester, I think it is not difficult to draw CAD at present, but whether I can master the skills directly affects the speed of drawing. To sum up, there are probably the following points:

(1) When drawing, you should be good at drawing with shortcut icons and be "fickle", because sometimes there are many ways to draw a picture, so you should choose your own skilled method or the method with convenient steps.

(2) If you want to draw quickly, you must follow the principles of "whole-part" and "easy first, then difficult", that is, draw the big part first, and then process the small part; Draw the easy ones first, then the difficult ones. Avoid walking into a dead end and wasting time.

(3) Be patient. In order to achieve the most accurate and beautiful effect, many subtle places must be revised repeatedly, and we must persevere.

Learn to be opportunistic, that is, be good at using the "copy" command in CAD, which is also the place where hand-drawing can't compete with CAD drawing. It can save you a lot of time.

The training process is even more unforgettable. Under the guidance of the teacher, I understand that the thickness of the original wall is generally 2 mm, which was painted casually before, and I didn't investigate the specific value (self-reflection, because I didn't break the spirit of pursuing truth in the end), and now I have a feeling of being suddenly enlightened. It should be noted that when writing words, use multi-line words instead of single-line words, so that it will not be so troublesome when you need to modify them. In order to make the picture more beautiful, we should adjust the size of words and the distance between words and lines according to local conditions. When drawing the third picture, I was really shocked by the full layout at first, but after exclaiming "Wow, so many", I felt high morale. I believe that as long as you have confidence and are willing to work hard, there is no obstacle. I think the Great Wall of Wan Li is made of bricks. How can I be defeated by a mere drawing? Because this picture contains a top view and a left view, I decided to draw a top view first and then a left view. After drawing the left view, I will put these two figures in place, and then I will write notes and draw tables. After hard work and persistence, it was finally completed. Looking at the full drawings, I am full of pride. When marking papers, it is mainly to dare to guess and try reasonably. Maybe if you modify it once, the label is not satisfactory, but after trying it many times, you will gradually discover its law and understand its meaning, so that you can skillfully label the label that is satisfactory to you. This process has deepened my understanding of species. Understanding this command makes you more skilled in CAD operation.

With this internship experience, I understand the requirements of society for talents, and I have learned a lot of knowledge that I can't learn in class, which has benefited me a lot. It also broadens my horizons and increases my knowledge. Maybe my internship is short, and I don't know much about AUTOCAD or CAD, but I believe I will work harder after that, because practice is the test of truth and falsehood.

Looking at my work, I am proud of my efforts and sweat. Thank you very much for the selfless dedication of the teacher to "teach fish" and the guidance of the students to "wake up the dreamer with one word". Thank you!

Cad training summary 2 autocad is a widely used technical application software, especially in machinery, construction and other industries. Compared with manual drawing, computer-aided drawing has many outstanding advantages in accuracy, accuracy and aesthetics, far exceeding manual drawing. This internship is very useful. It laid a solid foundation for me to enter social work in the future. The following is my summary of autocad operation methods in this internship:

1: AutoCAD uses the three-dimensional coordinate system to determine the position of the coordinate values displayed in the screen status bar in space. Is the current cursor position.

2. Model space refers to using the computer screen as a window to observe the room model, and changing the position and size of the window by combining translation and scaling commands. In this way, we can observe part and all of the model from any angle.

3. Edit the text of the l edit tag in the text autocad provides two commands: doledit and broperties.

4. Use the tool buttons to zoom the window, and arrange the window zoom buttons in the standard toolbar. When operating, click Open with the left mouse button first. Move the mouse to the selected position, and then release the left button.

5. Uniaxial stretching of drawings. As far as cad is concerned, there is a method: define the drawn drawing into blocks, and then insert the blocks. At this point, uniaxial stretching (scaling) can be performed. The method is to use the drawing menu, click Block-Create Block-Block Definition dialog box appears-Name-Select Object-OK. Then insert a block in drawing or model space, and an insert dialog box will appear. Select the newly defined block, and enter the scaling ratio of the inserted block in the X or Y direction in the "Scaling Ratio" option of this dialog box. After confirmation, the inserted drawing will be scaled according to the ratio you specified.

With this internship experience, I understand the requirements of society for talents, and I have learned a lot of knowledge that I can't learn in class, which has benefited me a lot. It also broadens my horizons and increases my knowledge. Maybe my internship is short, and I don't know much about autocad or cad, but I believe I will work harder after that, because practice is the test of truth and falsehood.

Finally, I want to give my most sincere wishes to my teachers and thank them for their teaching.

Summary of cad training work 3 i. Training tasks

Construction drawings of school apartments, including plans, elevations, sections and details.

Second, the purpose of training

AutoCAD is a practical drawing software, which can draw and modify various engineering drawings quickly, accurately and conveniently, and it is an essential basic skill for engineering professionals. Through this training, students are required to master all kinds of drawing commands and modifying commands, and set up layers, text styles and size styles skillfully. Establish characters and tables according to drawing specifications; Fill some figures with patterns; Quickly mark the finished drawings. Learn the basic knowledge of AutoCAD, master the operation management and environment setting of AutoCAD files, and master the input method of coordinates; Master the capture of object feature points, the setting of line type, color and layer, the setting of graphics and the basic methods of graphics. Master various drawing commands of AutoCAD, skillfully use tools to accurately select, delete, copy, mirror, matrix, move, scale, stretch, trim, extend and fill in the drawings, and correctly label and output the drawings. Master the writing, pattern filling, block making and insertion methods of AutoCAD. Master AutoCAD's various dimensioning, dimensioning and dimensioning modification commands.

Third, the training plan:

65438+February 65438+Be familiar with the operation in the morning of February and draw the floor plan; Draw the second floor plan in the afternoon.

In the morning of February, 65438+March, a three-story plan was drawn; Draw a four-story plan in the afternoon.

In the morning of 65438+February and 65438+April, the facade was painted; Organize the data in the afternoon.

In the morning of 65438+February and 65438+May, the facade was painted; Draw a profile in the afternoon.

65438+February, 65438+June morning, draw the profile and improve the drawings; In the afternoon, organize the materials and write the internship report.

Fourth, the training summary:

Freshmen often make some mistakes when they study engineering drawing and hand-drawn drawings, which are not very accurate. I have been expecting a tool to replace manual drawing. This semester we studied CAD drawing, and this time we studied CAD. The teacher taught us how to install CAD and let us draw mainly on the command line. Don't be afraid of drawing mistakes, because it can be modified. In this way, we further strengthen the potential of using CAD, and with the help of Tianzheng software, we solve the problem of time and the trouble of manual drawing. These two softwares are used together to draw very accurately, and the pictures drawn are very beautiful. It is also very convenient, and you can also see the three-dimensional effect of the building, just like seeing the real building. I like this tool very much. It solves the troubles of engineers in the past and makes engineers work more efficiently.

After the study and practice of this training, I have a deeper understanding of CAD. Although we don't have many classes, I am very interested in this course. At the same time, I also know the importance of this course. It is an indispensable application tool in our future work and a stepping stone for us.

In the study, we have further communication with teachers, which enhances the feelings between teachers and students. At the same time, the interaction between us and our classmates has enhanced the friendship between our classmates. In class, our learning efficiency is very high. Everyone will study hard and ask questions if they don't understand, so that we can make progress together and improve very quickly. During the training, the teacher will also record the number of drawings made by each student, so as to enhance the competition among students, make everyone draw very seriously, communicate with each other attentively and improve cooperation. Teachers will constantly tell us the examples of our seniors in class, which will stimulate our learning enthusiasm and improve our learning efficiency.

From the beginning, only one straight line can be made, from the plane figure to the whole house figure, and then to the cube stool, small table and special-shaped cube desk. I vaguely remember that we couldn't make a hook at first, the two arcs just couldn't be tangent, and we couldn't do it many times. Finally, we had to connect the two arcs with curves, but the teacher found out. After we went back, we read last semester's drawings combined with CAD books and finally understood how to do it. We also have confidence in class and are no longer afraid of drawing. After that, we gradually like CAD drawing. I remember once after I finished painting, the teacher praised me. I am really happy. I have become more motivated and interested.

Think about a semester's study. There is bitterness in bitterness and joy in joy. This semester, I learned a lot of knowledge and deepened my feelings with my classmates and teachers.

Summary of cad training 4 Last week, our class had a week-long CAD training, and I finally finished the task without paying Mr. Jia. This not only consolidated the knowledge I learned in the past, but also cultivated my practical ability, which made me deeply understand the rigorous working attitude that I should have as a mold designer.

How time flies! By the end of today, the one-week CAD drawing training is coming to an end. Now it's funny to recall my ignorance when I first entered the computer room. After a semester of study, I don't know where to start in the face of a large number of graphics. Class is a step-by-step and orderly learning, and the exercises after class do not involve the knowledge before and after, so the coherence of knowledge is not very great. When we actually use it, we find that what we learned before is a bit strange.

On the first day of training, the teacher gave us the course arrangement of this week's training, explained the main content, purpose and significance of this week's training, then explained some details, emphasized some places that should be paid attention to, and scored the exam. After listening to the teacher's explanation, I didn't go to draw immediately, but spent two classes carefully reading the task instructions and design instructions, and carefully reading the drawing requirements and drawing steps, so as to reasonably complete this week's training work. I face this rare training opportunity with a positive attitude.

The training schedule is a bit tight, especially on Tuesday. Seeing such a timetable, I have no impulse to slip away. Then I carefully studied the operation details of each picture, some with hints and some without. I think with the help of teachers and classmates, this week's training will be very rewarding.

In the next few days, classmates, I started to do CAD operations, and I was not idle. After starting, open the CAD program, quickly build layers and save them, and then start drawing the parts of the jack base. It was easy to draw there at first. I trimmed the part according to the method taught by Mr. Jia before, and finally marked the drawn part. I really can't find the symbol of diameter in the 20xx version of the computer.

So I asked Teacher Jia for advice. She immediately put down her work and came to guide herself. In a short time, the problem was easily solved by her. I am very grateful and admired for her serious teaching attitude. Then continue to finish the later work, and finish the drawing of the first part easily and quickly with the method taught by Mr. Jia. With the experience and guidance of the previous part drawing, I successfully completed the second part drawing, which was easily completed in one hour. I was a little proud to see that a classmate next to me had just finished drawing the first picture, but I immediately reminded myself that the revolution had not been successful and comrades still needed to work hard.

So he immediately threw himself into the next battle. In this way, my five parts drawings were completed in only one and a half days. On the third day, I was absent-minded, and secretly played gobang for a while, only to be discovered by Teacher Jia. On the fourth morning, Mr. Jia called my name heavily and severely criticized me, saying that I was not enterprising, playing gobang all day and doing nothing, which made me feel ashamed. And carefully completed the assembly drawing of the last jack, and carefully checked the parts drawing drawn before, modified some shortcomings in detail, and then saved it in your own mobile U disk, ready to print tomorrow.

Summary of cad training. By the end of this day, the one-week training of CAD drawing operation will come to an end. It's funny to recall my ignorance when I first entered the computer room. After a semester's study, I don't know where to start with a large amount of graphics. Class is a step-by-step and orderly learning, and the exercises after class do not involve the knowledge before and after, so the coherence of knowledge is not very great. When we actually use it, we find that what we learned before is a bit strange.

On the first day of the big homework training, the teacher first arranged the course of this week's big homework training, explained the main information, purpose and benefits of this week's big homework training, then explained some details, emphasized some places that should be paid attention to, and scored the exam. After listening to the teacher's explanation, I didn't go to draw immediately, but spent two classes carefully reading the task instructions and design instructions, and carefully reading the drawing requirements and drawing steps, so as to reasonably complete this week's training work. I responded to this rare opportunity for big homework training with my heart. The training time for big homework is a little tight. Because of the Dragon Boat Festival, I make up lessons on Saturday and Sunday. I draw it from 8: 30 in the morning to 1 1: 55, and from 2: 00 to 5: 30 in the afternoon. Seeing such a day's schedule, I have no impulse to slip away. After that, I carefully studied the operation details of each picture, some with hints and some without. I think with the help of teachers and classmates, this week's training will be very rewarding.

In the next few days, I have been drawing every picture seriously, thinking about every detail and drawing every step, even if it is a small problem, I will be very careful. I did encounter many problems in the process of drawing, but with the help of teachers and classmates, I broke them one by one, which inevitably surprised me, thus enhancing my interest in CAD.

What I fear most in my study is lack of interest. With interest and curiosity, you won't feel tired doing anything. So I found some information about CAD on the Internet. The inventor of CAD is Professor Skye K of MIT. Based on 1955, the world's first light pen developed by SAGE system in Lincoln Laboratory, the research plan of so-called conversational graphics is put forward. The plan is to connect a cathode ray tube to the computer, and then use a hand-held light pen to input data, so that the computer can sense the position on the screen through the sensor on the light pen, and obtain its coordinate values and store them in the memory. Even if the cathode ray tube is a computer display screen, the current light pen may be a more advanced mouse, digitizer or stylus. At that time, the computer was huge and crude, but in any case, this plan started the practical start of CAD. This scheme actually includes CAD software like AutoCAD, but the function application is very simple. When the concept of interactive graphics was put forward and published, in the United States, large companies such as General Motors and Boeing Airlines began to develop their own interactive graphics systems, that is, during the one-week training, I not only learned the real learning materials, but also deeply understood the knowledge outside my major, which is basically the origin of CAD. Later, due to the continuous innovation and development of people, the latest CAD drawings were obtained.

AutoCAD software has the characteristics of simple operation and powerful functions, and each toolbar has corresponding command tools. Our former teacher taught us the skills and methods of using command tools in big homework. To build a layer before drawing, the most basic line type settings are thin solid line, thick solid line, middle line and dotted line. The first step in drawing A4 drawings and the graphics to be located is to draw the boundaries of the graphics, and then draw them. When modifying the text, use single-line text and multi-line text to finish in Microsoft Yahoo!, modify the required style in formatted text style or double-click to write the text. Before drawing two-dimensional and three-dimensional graphics, the center line should be used for positioning before drawing. After drawing the drawing, you should dimension it, and create and modify the dimension style in the dimension style in the format. For example, when the dimensions are not drawn according to the standard, it is necessary to modify the data when marking the dimensions, which not only affects the beauty of the drawings, but also directly affects the authenticity of the drawings. So in the process of drawing, we must be very careful, step by step, and be accurate. For example, when trimming the remaining straight lines, it is likely that you can't cut them first, because there is no connection between lines.

In a word, in this week's CAD training, I feel that I have studied for more than one semester, and my drawing skills can't be learned by ordinary learning. I hope there will be more such training opportunities in the future. I feel very full this week and really integrated into my study. I have no other ideas. Everything is fine, I feel very good! Achieved the expected goals and requirements and benefited a lot!

;