NX application engineer technical certification
(65438+20071October 1 1)
1. Purpose of certification project
With the sharp increase in the number of NX users in China, there is a growing demand for excellent NX technicians, and more and more NX technicians also hope to get a reasonable evaluation of their level of using NX software. Based on these factors, UGS (China) Co., Ltd. designed a set of NX technology certification system.
Through certification examination and reasonable grading of technicians, enterprises can obtain the following four benefits:
(1) Explore more NX outstanding technical talents and improve the R&D efficiency of enterprises.
(2) Confirm the technical level of engineers and use NX as one of the criteria for hiring and promoting technicians. Provide reasonable employment basis for enterprise management.
(3) Obtain the use of NX software by technicians, so as to make an accurate training plan and determine the standards for evaluating the training effect.
(4) Encourage engineers to actively study NX software, and finally achieve the goal of improving product design level.
At the same time, by taking the certification examination and obtaining the corresponding technical level, professional and technical personnel can also get the following four benefits;
(1) You will get the corresponding NX technical grade certificate, which will be used in any activities that are beneficial to your own career development.
(2) The industry will recognize your knowledge and proficiency in using NX software.
(3) improve their own value in the enterprise.
(4) contribute to the development and progress of their own career.
2. Certification responsibility institution
The responsible organization of this certification project is UGS China Education Service Group (China) Co., Ltd., and its responsibilities include:
Planning, approval and subsequent improvement of this certification project.
Confirmation of evaluation outline.
Examination proposition.
Final confirmation of evaluation results.
Certificate issuance.
Candidates' problem handling.
3. Evaluate the project and technical level
This certification has set up two projects, CAD and CAM, with the following technical levels. Please refer to the evaluation outline for technical requirements at all levels.
3. 1 CAD project
3. 1. 1 NX designer
Have the ability to design independent products with NX. (The relevant industry knowledge required for design is not included in this certification project)
Able to independently handle various CAD technical problems in the design process.
3.1.2 technical demonstration of special application module for NX CAD
Have the design ability of NX design application engineer.
Ability to organize product design and development projects-such as assembly configuration, waveform definition, structural coordination in design process, concurrent engineering organization, data file organization and management.
3.2 Computer Aided Manufacturing Project
3.2. 1 NX craftsman
Have the ability to use NX for independent NC programming and post-processing.
Able to independently handle various difficult problems of CAM technology during machining.
3.2.2 Technical demonstration of NX CAM special application module
Have the ability of NC programming and post-processing of NX technologist.
Be responsible for the establishment of NX CAM customer environment-such as machine tool connection, template development, machining database definition, etc.
Able to organize product design and development projects-such as concurrent engineering implementation, data file organization and management.
Complex machining-such as five-axis machining, etc
4. Qualification procedures and fees, etc.
Anyone who can master NX-related theoretical knowledge and operational practice well can apply for certification from UGS China Education Service Group.
When applying, the certification items and grades that need to be applied for shall be stated.
Everyone can only apply for one level at a time.
You need to pay the certification fee when you apply for the exam. The charging standards are as follows:
Certification fee for certification projects
NX designer
65438 yuan +0200 yuan
NX craftsman
65438 yuan +0200 yuan
5. Examination procedures
The examination includes two parts: theoretical examination (written examination) and computer operation. Among them, the theoretical examination is 2.5 hours and the computer operation is 3.5 hours.
The examination was held in Shanghai, Beijing, Shenzhen and Chengdu (depending on the registration) on February 2 1 2007. The invigilator is presided over by UGS (China) Co., Ltd. China Education Service Group.
6. Evaluation procedure
The examination and evaluation of examination papers shall be undertaken by UGS (China) Co., Ltd. China Education Service Group, and those who pass the examination shall be awarded the corresponding technical grade certification certificate. The examination results, whether passed or not, will be notified to the candidates by UGS (China) Co., Ltd. China Education Service Group through letters and emails.
7. Authentication forms and authentication queries
Candidates who pass the examination will be issued with certificates by China Education Service Section of UGS (China) Co., Ltd. In order to facilitate authentication inquiry and prevent forgery of authentication, UGS will be responsible for publishing the names, valid ID numbers and authentication technical levels of qualified candidates on the website of UGS (China) Co., Ltd. for public inquiry.
8. Candidates ask questions
If candidates have objections or questions about the evaluation results, they can directly question UGS China Education Service Group by email, fax, telephone or letter. We are responsible for reviewing the candidates' achievements to ensure the accuracy of the evaluation.
9. Evaluation consultation
In order to help candidates successfully pass the exam, UGS China Education Service Group will provide the following services for candidates:
Review materials -UGS will provide professional review materials related to the requirements of the evaluation outline.
Examination consultation-introduce and answer questions about examination procedures and examination scope. (excluding answering technical questions)
Please remit money to: Ji You System (China) Co., Ltd.
Registration number: Qiduhu Zongzi No.027244 (Hongkou)
Legal address: No.20, Lane 42 1 siping road, Hongkou District, Shanghai.
Legal Representative: Hans-Kurt Lubberstate.
Authorized representative: Yuan Chaoming
Mailing address: 30th floor, Building 2, hang lung plaza Office Building, Nanjing West Road 1366.
Postal code: 200040
Bank of deposit: Citibank (China) Limited Shanghai Branch.
Bank Address: Citigroup Tower, No.33 Qiaolu Road, Lujiazui Garden, Pudong New Area, Shanghai
(account number) Swift code: citicnsx
Bank account number: 404003- 1730825036
Taxpayer registration number: 310109607417785.
Tel: 02 1-62898000
Fax: 02 1-62899000
Citibank Tel 800-820- 1268* 1*9