1, safety production management organization
1. 1 The company has established a safety production management committee with the general manager as the director and the deputy general manager as the deputy director, and its members include department managers and major production team leaders.
1.2 The company's safety committee has an office, and the team leader is also the director of the office of the safety committee and the company's safety officer, who is responsible for the daily safety production management of the company.
1.3 the company has established a safety production management network with the safety committee as the core and all employees participating, performing their respective duties, earnestly exercising their rights and obligations, implementing the responsibility system for safety production, standardizing employees' operation behaviors, and ensuring production safety.
2. Safety education and training
2. 1 All employees should establish a high awareness of safety and fully understand the importance of safety production to the country, enterprises and employees, and relevant departments should do a good job in safety education and training.
2.2 Conduct safety education and safety knowledge training for employees on a regular basis.
2.3 New employees must go through the education and training of the company's administration department and safety production management department before taking up their posts, so that they can basically master the relevant safety production rules and regulations and operating procedures, and master the safety operating procedures and basic skills of this position.
2.4 All departments and production teams should carry out safety activities regularly, at least three times a month, so as to continuously enhance employees' safety awareness, improve safety production skills and enhance accident prevention and emergency handling capabilities.
2.5 Safety education, training and safety activities of all departments and teams shall be effectively implemented, and records of safety activities shall be established and improved. The safety activity record shall include the activity content, time, organizer and participants, and the participants shall sign the activity record for confirmation.
3. Safety production management responsibilities
3. 1 General Manager (Deputy General Manager) Responsibilities of Safety Production Management:
3. 1. 1 Seriously implement the National Law on Work Safety and relevant laws and regulations, strengthen the leadership over the management of work safety, and be fully responsible for the company's work safety.
3. 1.2 Organize to formulate the company's safety production management system, equipment safety operation procedures and other safety production management systems, and publish and implement them.
3. 1.3 according to the needs of the company's safety production management, equipped with qualified full-time or part-time safety management personnel. Conduct regular or irregular inspections or spot checks on safety production management and job sites.
3. 1.4 Take effective measures to improve the working conditions of employees and ensure the timely supply of materials, equipment, instruments and labor protection articles needed for safe production.
3. 1.5 Organize to formulate the education and training plan for employees' knowledge and skills of safety in production and urge relevant departments to implement it.
3. 1.6 Organize to formulate accident prevention measures and emergency plans, conduct drills regularly, check the implementation of accident prevention measures, and eliminate hidden dangers in time.
3. 1.7 presided over the monthly safety production analysis meeting, summed up the experience and lessons, found out the unfavorable factors and hidden dangers of safety production, and formulated measures to overcome the potential safety hazards, eliminate the hidden dangers of accidents and ensure safety production.
3. 1.8 Take charge of handling major accidents and report the accidents to the competent government departments in time. 3.2 responsibilities of department manager (director) in safety production management
3.2. 1 Seriously implement the national production safety law, relevant laws and regulations and public safety management system. Under the leadership of the general manager (deputy general manager), do a good job in the safety management of this department and be fully responsible for the safety production of this department.
3.2.2 According to the actual situation of safety production in this department and the provisions of national laws and regulations and the company's safety production management system, formulate the responsibility system for safety production in this department, which will be implemented after being approved by the general manager.
3.2.3 Conduct safety education for employees in this department on a regular basis, organize to study the national safety production law and relevant laws and regulations, learn the company's safety management system and operating procedures, and enhance employees' safety awareness and accident prevention ability. Organize to study and carry out safety activities at least three times a month, and the educational activities should have contents and records.
3.2.4 Regularly organize part-time safety officers of this department to implement the safety production management system for each team and production site of this department, check whether there are any violations and hidden dangers of accidents, find problems in time and correct and eliminate them. Conduct safety inspection and hazard inspection once a week, and keep records.
3.2.5 Have the right to stop all violations and organize to eliminate hidden dangers of accidents. Put forward handling opinions (criticism, education and economic punishment) for those responsible for violations of regulations and hidden dangers of accidents, and report them to the general manager for approval before implementation.
3.2.6 Regularly inspect, maintain and repair the production and living equipment, facilities and protective devices kept and used by this department to ensure their safe use. Have the right to put forward suggestions for improving the protective devices of the equipment kept and used by this department, and report in writing to the general manager or the deputy general manager in charge, and implement them after approval.
3.3 Company Part-time Safety Officer Responsibilities
3.3. 1 According to the national guidelines and policies on safe production, seriously study and educate employees to abide by laws and regulations, and strictly implement the company's safe production system and safe operation procedures. According to the actual situation of concrete production, transportation and pumping in Dig Company, revise and improve the safety production management system, operating procedures and other rules and regulations, and report them to the general manager for approval before implementation.
3.3.2 Supervise the implementation of safety production management system, safety operation rules and other rules and regulations, check the equipment operation status, equipment safety protection devices and the implementation of safety production measures, urge the rectification of the problems found, report major equipment defects and hidden dangers of accidents to the company leaders in time, and take measures to rectify and eliminate them.
3.3.3 Often go deep into the production and construction site to check the operation status of equipment and the safe operation status of employees. Have the right to stop illegal command and illegal operation, and put forward opinions on handling illegal personnel, notify relevant departments, and report to the company leaders for approval and implementation.
3.3.4 Organize and guide the management and inspection of safety production by part-time safety officers of all departments and teams. Establish and improve the safety production management data and records, and assess the safety production work of various departments.
3.3.5 Participate in accident investigation and handling, carefully analyze the cause of the accident, find out the weak links and tendentious problems in safety production management, report to the competent leader and take measures to correct them.
3.3.6 Give suggestions on rewards and commendation to those who have made outstanding contributions in production safety, and put forward handling opinions to those responsible for accidents, those responsible for violating production safety rules and regulations and those responsible for relevant leaders according to the seriousness of the case.
3.4 Responsibilities of part-time safety officers of various departments and teams
3.4. 1 Be responsible for the safety education of employees in departments and teams, organize safety activities, establish and improve the information and records of safety activities, give full play to the role of part-time safety officers in departments and teams, and do a good job in safety production in departments and teams. Safety inspection once a day and safety activities once a week.
3.4.2 Be responsible for the daily safety production and site management of the department and team; Check and correct violations, take the lead in strictly implementing the safety production system and safety operation rules, and have the right to refuse instructions that violate safety rules and regulations and safety operation rules.
3.4.3 The personnel who have contributed to the production of the department and the safety team have the right to suggest commendation and reward, and the personnel who violate the rules or cause accidents have the right to put forward handling opinions and put them forward to the department manager or the office of the safety committee.
4, post, type of work safety production responsibilities
4. 1 Safety production responsibility of mixing station operators
4. 1. 1 Operators should establish the idea of "safety first, prevention first". Strictly abide by the company's safety production management system and operating procedures, enhance the awareness of safety production, and achieve safety production.
4. 1.2 Before each machine is started, it is necessary to carefully check the equipment condition, whether there are people or sundries in the main engine, belt conveyor and unloading area, and start the equipment when there are no people, and make inspection records. Start running in winter 10 minute.
4. 1.3 If the equipment is abnormal on duty, notify the mechanic to check it in time, eliminate the abnormality and make records. When taking over, it is necessary to explain the equipment operation status, existing problems and matters needing attention to the successor. Before leaving the job, the handover record shall be signed by both the handover person and the successor.
4. 1.4 When the mechanic or assistant worker overhauls and cleans the mixing system equipment, the main power supply must be cut off first. Operators, mechanics or auxiliary workers should confirm the power failure, sign the record form, and give the key of the power distribution cabinet to the host maintenance and cleaner for safekeeping. And before entering the machine for maintenance or cleaning, put warning signs on the operating table.
4. 1.5 After the maintenance and cleaning work of mechanics and auxiliary workers is completed, the operators shall conduct acceptance inspection, confirm that there is no one in the machine and no sundries left, start the equipment trial operation, and both parties shall sign the maintenance record form for confirmation.
4. 1.6 The operation room is an important place for equipment operation and control, and irrelevant personnel are prohibited from entering without permission.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd