Set to 5 4 3 2 1 level.
Corresponding to junior, intermediate, senior technicians and senior technicians.
To master any subject, you need to take part in professional training. Take the lathe worker as an example. you must
National professional standards for lathe workers
1. Career profile
1. 1 occupation name
Turner.
1.2 occupation definition
A person who operates a lathe to cut the rotating surface of a workpiece.
1.3 professional level
There are five levels of this profession, namely: primary (national vocational qualification level 5), intermediate (national vocational qualification level 4), advanced (national vocational qualification level 3), technician (national vocational qualification level 2) and senior technician (national vocational qualification level 1).
1.4 occupational environment
Indoor, normal temperature.
1.5 Characteristics of professional ability
Strong computing ability and sense of space, body perception and color perception, flexible fingers and arms, coordinated movements.
1.6 basic education level
Graduated from junior high school.
1.7 training requirements
1.7. 1 training period
Full-time vocational school education is determined according to its training objectives and teaching plan. Promotion training period: no less than 500 standard hours for junior students; The intermediate level is not less than 400 standard hours; Senior not less than 300 standard hours; Technical personnel should be no less than 300 standard hours; Senior technicians shall have no less than 200 standard class hours.
1.7.2 Training teachers
Teachers who train junior, middle and senior lathe workers should have the professional qualification certificate of professional technician or above or the professional technical post qualification of intermediate or above in related majors; Teachers who train technicians should have the professional qualification certificate of senior technicians in this major or the qualifications for senior professional and technical positions in related majors; Teachers who train senior technicians should have the professional qualification certificate of senior technicians in this major for more than 2 years or the qualifications for senior professional and technical positions in related majors.
1.7.3 training ground equipment
There are standard classrooms that meet the teaching needs, equipped with lathes and necessary tools, fixtures, measuring tools and lathe auxiliary equipment.
1.8 identification requirements
1.8. 1 applicable object
A person who is engaged in or ready to engage in this profession.
1.8.2 reporting conditions
-Main (one of the following conditions)
(1) Reach the standard class hours specified in the formal primary training of this occupation, and obtain the graduation (completion) certificate.
(2) Engaged in this vocational training for more than 2 years.
(3) The professional apprenticeship expires.
-Intermediate (one of the following conditions)
(1) After obtaining the primary vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 3 years continuously, and has reached the required standard hours after the formal training of this occupation intermediate, and obtained the graduation (completion) certificate.
(2) Having worked in this occupation for more than 5 years after obtaining the primary vocational qualification certificate of this occupation.
(3) Engaged in this occupation for more than 7 years.
(4) Obtain the vocational (professional) graduation certificate of the secondary vocational school with intermediate skills as the training goal, which is verified by the administrative department of labor security.
-Advanced (one of the following conditions)
(1) After obtaining the intermediate vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 4 years continuously, and has obtained the graduation (completion) certificate after reaching the prescribed standard hours through the advanced formal training of this occupation.
(two) after obtaining the intermediate vocational qualification certificate, he has been engaged in this occupation for more than 7 years.
(3) Obtaining the graduation certificate of this occupation (major) from a senior technical school or higher vocational school with the training goal of advanced skills, which is recognized by the administrative department of labor and social security.
(4) graduates of this major or related majors have obtained the intermediate vocational qualification certificate of this occupation and have been engaged in this occupation for more than 2 years.
-Technician (one of the following conditions)
(1) After obtaining the senior professional qualification certificate of this major, he has been engaged in this major for more than 5 years continuously, and has been trained by this professional technician to reach the required standard hours, and has obtained the graduation (completion) certificate.
(2) Having been engaged in this occupation for more than 8 years continuously after obtaining the senior vocational qualification certificate of this occupation.
(3) Graduates of this major (specialty) and graduates of this major or related majors from senior technical schools who have obtained the vocational senior vocational qualification certificate have been engaged in this occupation for 2 years continuously.
-Senior technician (meeting one of the following conditions)
(1) After obtaining the professional qualification certificate of the professional technician, he has been engaged in the professional work for more than 3 years continuously, and has been trained by the professional senior technician to reach the required standard hours, and has obtained the graduation (completion) certificate.
(2) After obtaining the professional qualification certificate of this professional technician, he has been engaged in this professional work for more than 5 years.
1.8.3 identification method
It is divided into theoretical knowledge test and skill operation test. The theoretical knowledge test adopts the closed-book written test method, and the skill operation test adopts the on-site practical operation method. Both the theoretical knowledge test and the skill operation test adopt the 100 scoring system, and the score above 60 is qualified. The appraisal of technicians and senior technicians must be comprehensively reviewed.
1.8.4 ratio of examiners to candidates
The ratio of examiners to candidates in the theoretical knowledge examination is 1: 15, and there are not less than 2 examiners in each standard classroom; In the skill operation assessment, the ratio of examiners to candidates is 1: 5, and there are not less than 3 examiners.
1.8.5 evaluation time
Theoretical knowledge examination time is not less than120min; ; The assessment time of skill operation is: not less than 240 min for junior, not less than 300 min for intermediate, not less than 360 min for advanced, not less than 420 min for technician and not less than 240 min for senior technician; Thesis defense time is not less than 45 minutes.
1.8.6 Identification of field equipment
The theoretical knowledge test is conducted in the standard classroom; The skill operation examination shall be conducted in a place equipped with necessary lathes, tools, fixtures, cutters, measuring tools, gauges and machine tool accessories.
2. Basic requirements
2. 1 professional ethics
2. 1. 1 Basic knowledge of professional ethics
2. 1.2 professional code
(1) Abide by laws, regulations and relevant regulations.
(2) Love your job and have a high sense of responsibility.
(3) Strictly implement work procedures, work specifications, process documents and safety operation procedures.
(4) serious and responsible work, unity and cooperation.
(5) Take good care of equipment and tools, fixtures, knives and measuring tools.
(6) Dress neatly and conform to regulations; Maintain a clean and orderly working environment and civilized production.
2.2 Basic knowledge
2.2. 1 Basic theoretical knowledge
(1) knowledge of reading pictures.
(2) Tolerance and cooperation.
(3) Common metal materials and knowledge of heat treatment.
(4) Common sense of nonmetallic materials.
2.2.2 Basic knowledge of machining
(1) mechanical transmission knowledge.
(2) Knowledge of common machining equipment (classification and use).
(3) Knowledge of common cutting tools for metal cutting.
(4) Processing technology of typical parts (spindle, box, gear, etc.). ).
(5) Understand the equipment lubrication and the use of cutting fluid.
(6) Knowledge of the use and maintenance of tools, fixtures and measuring tools.
2.2.3 Basic knowledge of locksmith
(1) marking knowledge
(2) The fitter's operation knowledge (chisel, file, saw, drill, screw hole, tap thread and set thread).
2.2.4 Electrician knowledge
(1) Types and uses of common appliances for general equipment.
(2) Basic knowledge of electric drive and control principle.
(3) Knowledge of safe electricity use.
2.2.5 knowledge of safe and civilized production and environmental protection
(1) requirements for on-site civilized production.
(2) knowledge of safe operation and labor protection.
(3) Environmental protection knowledge.
Quality management knowledge
(1) enterprise quality policy.
(2) post quality requirements.
(3) post quality assurance measures and responsibilities.
2.2.7 Knowledge of relevant laws and regulations
(1) Related knowledge of labor law