Study on Catalytic Compression Ignition Process of Regenerative Micro Engine, National Natural Science Foundation of China, 20 1 1-20 13.
Research on Key Technologies of Low Pollution Combustion System of Marine Diesel Engine, Jiangsu Science and Technology Support (Industry) Plan, 20 10-20 13.
Research on catalytic combustion technology of high-power micro-engine, Jiangsu Natural Science Foundation, 2009-20 12.
Research on the key combustion technology of diesel engine compound intake and exhaust system planned by six talents in Jiangsu Province in 2008.
Research on micro-power device based on homogeneous compression ignition theory, National Natural Science Foundation of China, 2006.
HCCI Engine Technology and Equipment Based on Composite System, Zhenjiang Science and Technology Industry, 2005.
Study on control mechanism of HCCI combustion process, Jiangsu Provincial Department of Education, 2003.
Research on new technology of premixed combustion of low-pollution vehicle diesel engine, Youth Innovation Fund of Jiangsu Natural Science Foundation, 2002
The main thesis is the influence of diesel engine noise geometry on internal cavitation flow, advanced materials research, 97-1kloc-0/(2010) 2925-2928.
Visual calculation of thermal hydrodynamic lubrication of journal bearing with dynamic load, advanced materials research, vol. 97-65438
Boiling of refrigerant mixtures in microchannels, Applied Mechanics and Materials, Vol. 34-35 (20 10), pp. 576-58 1.
Micro-scale catalytic combustion of hydrogen/air premixing. Combustion science and technology, Vol. 16 (1), 20 10: EI source periodical.
Numerical simulation of hydrogen catalytic combustion in microtubules. Journal of Jiangsu University, Volume 3 1 (1), 20 10: EI source periodical.
Study on combustion process of micro-engine based on coupled dynamics. Journal of Internal Combustion Engine, 27 (2), 2009: EI Source Journal
Experimental study on CFD optimization and nitrogen oxide reduction of diesel SCR system, Journal of Internal Combustion Engine, 27 (6), 2009: EI Source Journal.
Effect of copper on the adsorption of beta-cypermethrin and cypermethrin on two typical soils, Journal of Soil and Sediments, 200906.sci
Study on variable parameters of hydrogen combustion in microtubules. Thermal Science and Technology, 5( 1), 2009.
CFD analysis of the influence of jet pressure fluctuation on nozzle cavity development. Internal Combustion Engine Engineering, Vol.30 (1), 2009: 64-68: EI Source Journal.
Numerical simulation of combustion process of micro free piston engine. Combustion Branch of China Society of Engineering Thermophysics, 2008.438+00, Xi.
Research progress of micro-scale catalytic combustion, Applied Chemistry, Volume 37 (1 1), 1376- 1380, 2008.
Joint effects of permethrin and copper on catalase activity in soil, Journal of Soil and Sediments, 2008+00.sci.
Study on ignition timing control parameters of HCCI engine. Internal combustion engine engineering, 2006,27 (6): 21-25: including EI.
Study on the influence of initial velocity of free piston on combustion characteristics of micro homogeneous compression ignition engine, Journal of Jiangsu University (Natural Edition), No.3, 2006: including EI.
Improved design of diesel engine exhaust gas recirculation cooler. Journal of Agricultural Machinery, 2005,36 (2):16-18: EI included.
Three-dimensional numerical simulation analysis of two-phase flow in vertical porous nozzle cavity. Journal of mechanical engineering, 2005,41(3): 92 ~ 97: EI included.
Discussion on broadening the working range of HCCI engine. Automobile Engine, Vol. 169 (3), 14- 17, June 2007.
Numerical calculation of NOx emission from free piston engine. Journal of Internal Combustion Engine, 200 1, No.6, P562-566: EI.
Measurement and three-dimensional simulation of Swiss cavity combustion of diesel engine, SAE papers 2002-0 1-008, 2002: 1-6: EI included.
Study on transient flow in high pressure common rail fuel injection system of diesel engine. Journal of agricultural machinery, 2004,35 (1): 48 ~ 51:ei included.
Characteristics and present situation of homogeneous compression ignition engine, Journal of East China Institute of Shipbuilding Technology (Natural Edition), No.4, 2005.
Study on ignition model of micro HCCI free piston engine, proceedings of 2005 annual meeting of internal combustion engine society
Study on structural improvement of exhaust gas recirculation cooler, Journal of Jiangsu University, No.3, 2004
Lubrication analysis and energy saving research of main bearing of engine crankshaft, Journal of Agricultural Machinery, No.2, 2003
Study on turbulent distribution characteristics in swirl chamber of diesel engine, Journal of Agricultural Machinery, No.6, 1999
Study on high-speed reliability of swirl chamber diesel engine, Journal of Agricultural Machinery, No.4, 1999
LDA test and mathematical model of air flow characteristics in swirl chamber of diesel engine, Journal of Internal Combustion Engine, No.3, 1998
Study on air movement in diesel engine combustion chamber with LDA, Automotive Engineering, No.6, 1998
Experimental and computational study on air movement of swirl chamber diesel engine, Journal of Internal Combustion Engine, No.6, 1994.
Teaching Reform Paper: Research on the Training System of Innovative Talents in Higher Engineering, Higher Education Management, Volume 3, No.3, 2009.
Teaching Reform Paper: Discussion on Teaching Methods of Combustion Course, Journal of Jiangsu University (Higher Education Edition), No.6, 2004.
main work
1. Numerical thermophysical process, Jiangsu University Press, 2009.
2. Burning, China Science and Culture Press, 2002.
Main achievements 1. Low emission homogeneous compression ignition combustion technology and SCR emission aftertreatment technology of diesel engine.
2. Research and develop the theory of miniature compression ignition and catalytic combustion of micro-engine and miniature power system.
3. Numerical simulation of air movement, mixture formation and combustion in diesel engine cylinder.
4. Biomass gasification compact molding technology and solar geothermal comprehensive utilization method.
Awards 1. The research and application of combustion theory and combustion system of power machinery won the second prize of Jiangsu Science and Technology Progress in 2009.
2. Theoretical research and engineering application of power machine working process, second prize of scientific and technological progress of Machinery Industry Federation in 2009.
3. Research and application of testing technology for air movement and combustion system of diesel engine combustion chamber, third prize of scientific and technological progress of Ministry of Machinery Industry, 1997.
4. The establishment and practice of the talent training system of fluid machinery with 4C competence as the core, won the second prize of national teaching achievement in 2009.
5. Construction and practice of brand specialty of thermal energy and power engineering, second prize of teaching achievement in Jiangsu Province in 2007.
6. Experiment and numerical simulation of diesel engine combustion chamber flow field, the first excellent doctoral thesis of Jiangsu Province, 200 1.
Invention patent 1. Thermoelectric battery and storage battery power supply system, national invention patent, authorization number: ZL2006 100397492, 2009.
2. A technology and device for preparing mixed gas by homogeneous compression ignition of liquid fuel, national invention patent, authorization number: ZL2005 10037770.4, 2008.
3. premixed combustion method and device for direct injection diesel engine, national invention patent, authorization number: zl02113010.8, 2005.
4. Miniature free piston engine with air inlet and exhaust pipe preheating, national invention patent, authorization number: ZL2006 10097400.4 2009.
5. Solar-ground source combined heating, hot water supply and refrigeration system and its operation method, national invention patent, authorization number: ZL 200610097401.9 2008.
6. Solar energy comprehensive utilization system, national invention patent, authorization number: ZL 200610097398.0 2010.
Other 1. Academic Leader of "Blue Project" in Jiangsu Province in 2003
2.2007 Candidates for Six Talents Summit in Jiangsu Province