1

System management, user management, role management and organizational structure are respectively

Heading 1, heading 2, heading 3 and heading 4, as shown in the figure.

2

Now we need to number "system management, user management, role management and organizational structure" separately. The expected results are:

1. system management

1. 1. User management

1. 1. 1. Role management

1.1.1./organizational structure

three

How to set the effect of "1, system management"

1) First, position the cursor in front of the title that needs automatic numbering, as shown in the figure.

four

2) Click "Multilevel List" above the word-select "Define New Multilevel List", as shown in the following figure.

3) The definition multilevel list box pops up, as shown in the figure.

4) Set the list information, as shown in the figure.

Link the level to the style selection "Title 1". To display the level selection "Level 1" in the library, please select the starting number "1".

Select "1.2.3 ..." as the style number of this level (this can be selected as required, or other options can be selected, and the final numbering result is different).

5) Click OK to set successfully, as shown in the figure.

How to set the effect of "1. 1 user management"

The operation steps of 1) are the same as the decomposition steps of 1), 2) and 3). System management ",in which step 4) sets different parameters.

Link the level to the style selection "Title 2" and display the level selection "Level 2" in the library, as shown.

2) Click the Confirm button to set successfully, as shown in the figure.

How to set the effect of "1. 1. 1"? Role management "

The operation steps of 1) are the same as the decomposition steps of 1), 2) and 3). System management ",in which step 4) sets different parameters.

Link the level to the style selection "Title 3" and display the level selection "Level 3" in the library, as shown.

2) Click the Confirm button to set successfully, as shown in the figure.

How to set the effect of "1.1.1.1"? Organizational structure "

The operation steps of 1) are the same as the decomposition steps of 1), 2) and 3). System management ",in which step 4) sets different parameters.

Link the level to the style selection "Title 4" and display the level selection "Level 4" in the library, as shown.

2) Click the Confirm button to set successfully, as shown in the figure.

The overall effect is shown in the figure.

How to set the distance between the title serial number and the title in the paper

This is because the system is set up like this, so it is like this. I suggest you learn more by yourself, because sometimes this directory setting is not very scientific, so I suggest you try more by yourself.

Word about the title setting, how to set the title number of level 2 \3.

Use the item number, right-click or bullets and numbers in Format-Number-User Defined-to set the format you use. The last number is gray, which is the starting point of your number. They all start with 1, and the front is fixed, 1, 2. 1 or 65438+.

Then use the format brush to brush other titles.

How does word format the title so that its serial number has nothing to do with the previous one, but starts over?

On the Automatic Generation of Catalogue

1, click View-Toolbar-Outline, and set the corresponding level of the directory to be generated on this toolbar. The directory level is set to 1, 2, 3 ... and the body part is "body".

2. Click the "Document Structure Map" button on the toolbar, and the directory displayed in the current box is the directory to be generated. Click on the contents of the table of contents in the document structure diagram, and you can quickly locate the parts in the document, which is convenient for you to view, adjust and modify the table of contents.

3. After setting the level, click Insert-Reference-Index and Catalog-Catalog (related catalog options or styles can also be modified here) and confirm.

How to add the title number 1. 1. 1.2 in word?

Methods/steps

Open the Word document, position the insertion position at the beginning of the paragraph that needs automatic numbering, and then click the small triangle next to Automatic Numbering in the Start tab, and then click Define New Numbering Format in the drop-down menu.

After opening the window to define a new numbering format, first delete "1" from the numbering format.

Next, manually enter "1." In the number format input box.

After entering 1 , click the numbering style and select "1, 2,3 …" from the drop-down list. Of course, you can choose other numbering styles as needed.

At this point, the setting is complete. You can see in the preview at the bottom of the window that the numbering style has become the format we need. Click OK at this point. By analogy, this method can set up multi-level automatic numbering.

Next, select the remaining clips that need to be numbered, and then click the AutoNumber button in the start menu.

After clicking automatic numbering, you can see that all paragraphs have been numbered successfully.

How to set title automatic numbering in Word?

1) First, position the cursor in front of the title for which automatic numbering is required.

2) Click "Multilevel List" above the word and select "Define New Multilevel List"

3) a multi-level list box for definition pops up,

4) set the list information,

Link the level to the style selection "Title 1". To display the level selection "Level 1" in the library, please select the starting number "1".

Select "1.2.3 ..." as the style number of this level (this can be selected as required, or other options can be selected, and the final numbering result is different).

5) Click OK to set successfully.

How to adjust the distance between the title and the serial number by 30 points about the directory problem of word

Sometimes automatic numbering will make the interval between serial number and text larger, and the adjustment method is as follows:

1. Adjust the tab stop by modifying:

Right mouse button, paragraph, tab stop (T) in the lower left corner and default tab stop (F) in the upper right corner. Change the current "2 characters" to "0 characters", directly enter 0, and press OK.

2. The distance between the automatically numbered number and the text behind it can be adjusted in two ways:

(1), this method is not very easy to use by dragging the ruler.

(2) select the number of automatic numbering, and right-click "adjust list indentation"->; Select Not Specially Marked for After Numbering.

How to set the numbers of word Heading 1 and Heading 2?

jingyan.baidu/...f

Refer to the link content and reset the title.

If you can't solve it, just ask.

Setting of word Thesis Title (Bullets and Numbers)

I really don't know how you set these numbers. I suggest you choose the title style you need, and set the font size and other formats in the style of the formatting toolbar. For example, if you select it before or after entering the first chapter, select the title 1 in the style (here you can set the font size, whether it is bold, centered, etc.). , the same below, as in the first chapter of this case). For 1. 1, select heading 3 in the style (these depend on whether the style in your machine meets your requirements), and select 1. 1 as heading 4 and 1.2 as heading 3 in the style. . . The second chapter is selected as the title 1 (same as the first chapter), 2. 1 as the title 3, 2.2 as the title 3, 2.2. 1 as the title 4, indicating the title style corresponding to the first chapter. In this way, it will be very simple to make a table of contents in the end. After the contents are updated, you can update the table of contents (don't worry about page number errors). You can quickly reach the page referred to in the table of contents by clicking the title with CTRL+, and you don't have to worry about page number alignment. This is very useful for DIY typesetting of graduation thesis, as long as you set all the titles as I said above, and insert-quote-index and table of contents. I'm just giving a simple example here, and I believe you can master it through operation. . . .