1. Move the cursor to the position where you want to insert the reference, and select Insert-Citation-Footnote and Endnote from the menu.

2. Select Endnote in the dialog box, Automatic Numbering as the numbering method, and Section End or Document End as the location.

3. If AutoNumber is not Arabic numerals, select Options in the lower right corner and select Arabic numerals in the numbering format.

4. After confirmation, insert a superscript "1" here, and the cursor will automatically jump to the end of the article, which is preceded by a superscript "1", which is where the first reference is entered.

5. Change the format of the superscript "1" at the end of the article to normal (remember to change the format, don't delete it and re-enter, otherwise the reference will move in the future, and the serial number will remain unchanged), and then enter the reference inserted at the back (the format is slowly entered according to the requirements of the magazine, as if there is no way to simplify it).

6. Double-click "1" in front of the reference, and the cursor will return to the place where the reference was inserted in the article content, and you can continue to write the article.

7. Insert an endnote in the next place where you want to insert a reference according to the above method again, and a "2" will appear (Word has automatically sorted it for you), and continue to enter the reference to be inserted.

How to put square brackets on the label? It's simple:

8. Fill in "Find Content" in Edit-Replace in the menu and replace it with [&; ] can be:

9. For footnotes, fill in "Find Content" in the menu Edit-Replace and replace it with [&; ] I will.

It is suggested to put square brackets after writing an article, which will save a lot of unexpected trouble.

10. After quoting all the references, you will find that there is a short horizontal line in front of the first reference (which can only be seen in page view). If a spread is referenced, there is a long horizontal line in the spread, which cannot be selected or deleted. This is the sign of endnotes, but the format of general scientific papers cannot have such lines and must be deleted.

It's not over yet. Method of deleting horizontal line

1 1. Switch to normal view and select View-Footnote from the menu. At this point, the edit field of the endnote appears at the bottom.

12. Select "endnote separator" from the drop-down menu on the right side of endnote, and a short horizontal line will appear. Select and delete it.

13. Select "Endnote Continuation Delimiter" from the drop-down menu. This is a long horizontal line. Select and delete it.

14. Switch back to page view, and reference insertion has been completed.

At this time, no matter how the article is changed, the references will be automatically arranged in order. If it is deleted, the following references will disappear automatically and there will be no errors. The more citations, the stronger the advantage of this method.

Don't look at many steps, just operate once and you will know that it is very simple ~