Word version 20 1 0 operates like this: If you want to insert the page number "1" from page 2, then put the cursor on "Next Page" under the "Page Layout" drop-down menu, at the last point of the document 1 page (remember to insert section break, as shown in figure1). This is divided into two parts. Then move the cursor to page 2. Click Insert-Page Number-Page Bottom-Select Any Item to confirm that the page number has been inserted.
But sometimes the page numbers may still be numbered from the first page. Actually, we want the second page to start with "1". At this time, you should first select the page number of the second page and uncheck "Link to the previous page header" under the "Design" menu (as shown in Figure 2). Select and point to "Format Page Number" under the page number right-click menu-select "Start Page Number" and fill in "1" manually (as many pages as needed)-OK. Of course, you can delete the page number on the first page now, and rest assured that it will not affect the subsequent page numbers, because it has been separated by section break.
The purpose of WORD 2003 is that when you put the cursor on the page number, a dialog box will automatically pop up and click on the link to the previous page, which can also achieve the effect of "linking to the previous page header" in the 20 10 version.
It's actually quite simple. I wrote so much to make you understand. In fact, the key is to master the usage of "section break" with a few mouse clicks.
Question 2: How to quickly set the graduation thesis page number 1 in Word20 13? The first page "cover" and the second page "table of contents" have no page numbers, and there is no operation.
Roman numerals I, II, III, ... "1. Place the cursor at the top of the third page: click the menu bar-Insert-Delimiter-section break Type-Continuous, and then click OK; 2. Click Menu Bar-View-Header and Footer-(the header and footer floating toolbar appears), place the cursor on the footer of the third page, and click Cancel Link to Previous Page (the button is "Two Parallel Pages"). At this point, "Same as the previous section" in the upper right corner of the footer virtual box disappears. ; 3. Click "Set Page Number Format" (the button is "Hand and Page")-Page Number Layout-Page Number Format: I, II, III, ...; Starting Page Number: Modify "1" and click OK. ; 4. Click "Insert Page Number" (the button is "A # on paper"); 5. Close the Header and Footer Floating Toolbar.
2 From the fifth page, the numbers * * * 1, 2, 3, ... "
1. Put the cursor at the top of the fifth page, and refer to the settings in 2 above and 1; 2. Refer to the settings in 2 and 2 above to make "the same as the previous section" disappear; 3. Click "Set Page Number Format"-Page Number Arrangement-Number Format: 1, 2,3, ...; Starting Page Number: similarly modify "1" and click OK; 4. Refer to the operations in 2 and 4 above; 5. Please refer to the operations in 2 and 5 above.
Question 3: How to set the page number from the body of the paper? Set page numbers on any page.
When editing an article (including a table of contents), we want to insert a page number on the third page after the table of contents. What shall we do? There are two ways.
Method 1: First, move the cursor to the end of the second page, click Insert → Delimiter → section break Type, select the next page, and then click View to open the header and footer toolbar, adjust the cursor to the third page, that is, the page to start numbering, and set the link to previous page button on the header and footer toolbar to unchecked, and then
Method 2: It can be achieved by setting different headers and footers, but you need to divide the document with page numbers into sections. How to divide the sections? First, insert the cursor into the document where the section is needed, then open the Insert menu and click the Delimiter command to open the Delimiter dialog box.
Among them, there are four kinds of "section break style": ① Next page ② Continuous even pages ④ Singular pages. "Next page" means that the text after section break starts from a new page; "Continuous" means that the text after section break appears on the same page; "Even page" means that the text after section break starts from the next even page; "Single page" means that the text after section break starts from the next single page. Select one item according to your own arrangement needs, and press OK to return to the document. According to this method, you can divide the document into several different parts.
Now, you can set different headers and footers in different sections in the usual way. Starting from the second section only, when the header and footer toolbar is opened, the words "same as the previous section" will appear after "header-second section". You must click the "Same as the previous section" button on the toolbar, delete the words "Same as the previous section", and then set the header. After that, the header will be different from the header in the previous section. Footer settings are the same.
Finally, click the drop-down triangle of Insert AutoText in the Header and Footer toolbar and select Page Number.
Question 4: How to set the page number of graduation thesis table of contents and abstracts? I can help you sort it out online.
Discussion is the key and difficult point of this paper. We should look at the overall situation, grasp the main controversial issues, and discuss from perceptual knowledge to rational knowledge. It is necessary to analyze and reason the experimental results instead of repeating them. We should focus on the achievements and opinions in the relevant literature at home and abroad, and show our own views, especially the opposing views. In the discussion of the paper, you can put forward assumptions and ideas about the development of this topic, but the discretion should be appropriate, and it should not be written as "science fiction" or "imagination".
Question 5: How to insert page numbers in the main page of graduation thesis? For example, the first three pages don't
1. Point the mouse to the end of the third page and select Menu Insert-> Separator->; Next page, and then separate the first three pages.
2. In the header and footer menu, select Disconnect from the previous section, and then you can set the page number of the next page separately.
Question 6: How to set the page number from the third page of the paper? After graduating from college, writing a thesis or doing a graduation project, the school generally stipulates the "cover" and
You cannot edit the page number of the abstract. You should edit the page number from the third page.
My brother asked me for advice, which is the first time for me to encounter this problem. Combined with the uneven dialing of netizens,
After three hours of hard work, I finally conquered it. Now I offer you tears. * * * Share it with you! Setting method: Step 1, put the mouse in front of the first line of the text (that is, the third page) and click "Insert"-"Delimiter".
Select Next Page in section break Type, press OK, and then click Save. At this point, you will find the positive side.
A blank page was automatically added before the article, which can't be deleted at this time. Let's leave it at that time.
Step 2, with the mouse still in front of the first line of the text, click View-Header and Footer, which
Displays header and footer toolbars when. Click Switch between Header and Footer to switch to the footer.
Click the Link to Previous icon in the Header and Footer toolbar. At this point, you will find that,
The words "same as the previous section" in the upper right corner of the footer disappear, and then click the Save button. Don't turn off your phone at this time.
Close the header and footer toolbars.
Step 3: Click [Insert]-[Page Number] to pop up the page number dialog box, and confirm the page displayed on the home page.
Code "check box is selected, click the" Format "button above to pop up the" Page Number Format "pair.
Dialog box, and then select the "Start Page Number" option below. By default, "1" will be displayed (the number here is text
The page number displayed on the home page), well, remember to press the save button and finally close the header and footer toolbar in front.
The fourth step is that the blank page added automatically before is still above the text. At this point, position the cursor in space.
In front of the first line of the white page, press the "Delete" key, and the text will automatically jump to replace the blank page.
Each of the above steps is very important, which step is reversed, and which step is missing will fail.
Well, it must be strictly enforced. University graduation thesis, bidding documents of enterprises and institutions are all ok, I hope that's right.
Friends help.
Question 7: How to set the page number of any page in Word2007? How to insert the page number from the third page of graduation thesis in word2007?
1, the cursor is positioned at the end of the second page. Page Layout-Page Setup-Delimiter-section break-Next Page, and the cursor jumps to the top of the third page.
2. Insert-Header-Edit the header (at this time, the cursor appears in the header of the third page)-Go to the footer-Link to the previous header (the "same as the previous section" displayed on the right side of the footer disappears).
3. Insert-Header and Footer-Page Number-Format Page Number-Start Page Number: 1-OK. Page number-choose insert format-turn off the header and footer.
Question 8: How to set the page number of the paper header and footer? Graduation thesis always has a certain format. For example, the statements and contents in the first few pages do not count page numbers, and there is no header or footer. Then how to deal with it? In fact, you only need to use the piecewise function to complete it. For example, the first three pages are a part, followed by the text, with a header and footer, and the page number is calculated. The operation method is as follows: 1 First, split the document: position the mouse cursor at the end of the third page or the beginning of the fourth page, then click Insert (i) in the menu bar and click Delimiter (b) in the next menu that appears. (WORD2007, page layout-separator-section break. 2. Click View (v) in the menu bar, click Header and Footer (h) in the next menu that appears, open the Header and Footer toolbar, place the mouse cursor at the footer of page 4, and then click the Link to the first 1 tool button in the Header and Footer toolbar. After setting the header, close the header and footer toolbars. (WORD2007 edition, insert title) 3. Position the mouse cursor on page 4 or anywhere after it, click Insert (i) in the menu bar, and click Page Number (u) ... In the next menu that appears, open the Page Number dialog box, and select the desired page number position and alignment in this dialog box. Open the page number format dialog box, press the arrow to the right of the long box behind the number format (f), and select "1, 2,3, ..." From the drop-down list that appears (you can choose different formats according to your preference), choose whether to include chapter numbers, and select the starting page number (a) under the page number arrangement. Of course, page numbers can also be inserted into the footer in the same way. 4. If you want to insert page numbers in the first three pages, the operation method is as follows: position the mouse cursor anywhere from the first page to the third page, click Insert (i) in the menu bar, and click Page Number (u) ... In the next menu that appears, open the Page Number dialog box, select the desired page number position and alignment in the dialog box, and then press ""in the lower left corner of the dialog box. Open the page number format dialog box, press the arrow on the right side of the long box behind the number format (F), and select "I, II, III, ..." From the drop-down list that appears (you can choose different formats according to your preference), choose whether to include the chapter number, and select the "Start Page Number (A)" option under the page number arrangement.
Question 9: How to insert page numbers in graduation thesis? Page numbers start from any page.
1. Place the cursor at the top of the page where you want to start page numbering.
2. Select Insert-Delimiter to open the Delimiter dialog box. Under Delimiter Type, click the Select Next radio button.
3. Select the view-header and footer, and place the cursor at the footer.
4. In the header and footer toolbars, do the following in turn:
① Click the "Same as before" button to break the link with the previous section.
② Click the Insert Page Number button, and then click the Page Number Format button to open the Page Number Format dialog box.
③ Type the corresponding starting number in the box after "wow starting page number".
④ Click the "Close" button.
Question 10: Set the page number of graduation thesis in office2007 to 1, insert section break (next page) before the text, and * * * is-> Separator->; Section break->; Next page;
2. Insert page numbers in the home page, summary section and page layout->; In the lower right corner of page setup, point out the dialog box of page setup, select different home pages in the layout tab, then select this section in "Apply to", insert the page number, select the page number format as "I, II……", and set the starting page number as "0";
3. Insert the page number in the text, with the format of "1, 2 ..." and the page number of the text is "1";
As for the blank in English, it is right to choose "scattered alignment"!