In the sketch, four keyway drawing functions are added to the drawing area, namely, two-point straight line gap, center line straight line gap, three-point arc gap and center end arc gap.

Function entrance:

Sketch → Drawing → Two-point straight groove

2. Modify the properties of parts in batches.

In product design, especially in design modification, it is often necessary to modify the BOM information such as the name and code of the whole product. Through the "Batch Modify" function, you can edit the BOM information of parts in the whole assembly in batches.

Set Properties: You can set the property columns displayed in the window.

Rename rule: modify the disk file name in batches by setting the string rename rule.

Find and Replace: Find and replace the corresponding items according to the given characters.

Function entrance:

File → batch modification

3. Enhancement and improvement of 3D curve function

Moving curve

The move curve function is used to copy and move 3D curves, and supports two operations: specifying distance and specifying two points.

Function entrance:

3D curve → Modify → Move curve

Rotation curve

Use the function of rotating curve to realize the spatial rotation of three-dimensional curve, and support copying and moving.

Function entrance:

3D curve → Modify → Rotate curve

4. Surface projection line supports frame selection

When using the surface projection line function to project in 3D curves, you can frame the curves to be projected.

Function entrance:

Three-dimensional curve → surface projection line

5. Replace the model

For imported models, the 2022 version supports "replace model", which replaces the original imported model with a new model. However, we should pay attention to how the original model has geometric references, and the reference relationship will be lost after replacement.

Function entrance:

Select Import Geometry → Replace Model in the Design Tree.

6. Automatic projection size

In the 2022 version, the function of projecting dimensions when projecting views has been improved. In the original version, dimensions can only be projected by selecting "True Dimensions" in the output options of the standard view. In the 2022 version, this restriction was removed, and only the size type to be projected was selected in the projection object.

Function entrance:

3D interface → standard view → options → feature size, 3D size, sketch size and PMI size.

7. Optimization of file switching speed

In order to reduce the time of document window switching, the 2022 version added the option of whether to start the toolbar. If you cancel this option, the toolbar will not be loaded when switching documents, thus speeding up document switching.