Senior engineers should have the ability to process complex parts and process planning. In state-owned factories and units on the right track, there are corresponding certificates that can be used as a reference for salary assessment. Private enterprises generally only pay attention to practical operation ability.

CNC machine tools and other technical personnel to enter oneself for an examination conditions:

First, applicants who are engaged in or ready to engage in technical personnel should participate in the training and certification examinations of the corresponding majors in the province.

Two. Application conditions (1) Application conditions for technicians (with one of the conditions):

1, Grade 5/Primary School: those who have obtained the diploma of secondary vocational school (higher vocational school) and obtained the graduation (completion) certificate after reaching the required standard hours through relevant professional training.

2. Level 4/Intermediate:?

(1) Engaged in this occupation for more than 2 years after obtaining the primary certificate; ?

(2) Those with relevant professional secondary schools (including technical schools and vocational schools) or above; ?

(3) employees of enterprises and institutions have been engaged in this occupation for more than 5 years.

3. Level 3/Advanced:?

(1) Having been engaged in this occupation for more than 3 years after obtaining the Level 4 certificate; ?

(two) to obtain a college degree in this major or related majors, and to engage in this occupation for more than 3 years; ?

(3) employees of enterprises and institutions have been engaged in this occupation for more than 8 years.

4. Level II/Technician:?

(1) After obtaining the advanced certificate, he has been engaged in this occupation for more than 3 years, has been trained as a technician and reached the national standard, and has obtained the certificate of completion; ?

(2) Obtaining the advanced certificate of this occupation and working in this occupation for more than 5 years; ?

(3) graduated from a vocational and technical college or a senior technical school, obtained a senior vocational certificate, and worked in this profession for more than 2 years; ?

(4) Obtain an assistant engineer and have been engaged in this profession for more than 2 years in the front line.

5. Class I/Senior Technician:?

(1) Obtain the professional technician certificate, have been engaged in the professional work for more than 2 years, have been trained by the professional senior technician to reach the national standard hours, and have obtained the certificate of completion; ?

(two) after obtaining the certificate of technician, engaged in this occupation for more than 5 years; ?

(3) Obtain an engineer and have been engaged in this profession in the production line for more than 3 years; ?

(4) obtain the qualification of lecturer and engage in internship guidance and teaching in vocational and technical colleges (or technical schools) for a long time; ?

(five) to obtain the qualification of a first-class internship instructor and to engage in this occupation for more than 3 years in a vocational and technical college; ?

(6) Obtaining a master's degree in the same or similar major, and having been engaged in the professional work in the production line for more than 3 years.

(II) Application conditions for special operators: Anyone who is engaged in or ready to engage in special operations shall apply for a special operation certificate. Among the above conditions, the time limit for obtaining the "Advanced Engineering Technical Grade Certificate" can be appropriately relaxed according to the specific circumstances; The conditions for some special workers to declare technicians and senior technicians may be appropriately relaxed after being audited by the Provincial Labor and Social Security Department.

Extended data:

Advanced certificate of CNC lathe operator? It is a skill vocational qualification certificate and grade certificate issued by the Human Resources and Social Security Bureau. It belongs to level 3, and now the certificate of numerical control is based on this qualification certificate, so many enterprises require personnel to hold relevant certificates.

1, processing method

According to the relevant provisions of the state, the procedures for handling vocational qualification certificates are as follows: the vocational skill appraisal institute (station) will report the list of qualified personnel to the local vocational skill appraisal guidance center for examination and approval, and then report it to the administrative department of labor security at the same level or the labor security agency of the competent department of industry for examination and approval, and the vocational skill appraisal guidance center will uniformly handle the certificates and affix the vocational skills according to the certificate coding scheme and filling format requirements stipulated by the state.

The special seal of the appraisal institution shall be issued to me by the vocational skill appraisal institute (station) after being audited by the labor and social security administrative department at the same level or the labor and social security working institution in charge of the industry.

2. How to register?

To apply for vocational skill appraisal, you can apply to the local vocational skill appraisal institute (station) and fill in the application form for vocational skill appraisal. When registering, you should show your ID card, training completion certificate, technical grade certificate or working experience certificate issued by the labor department of your work unit. Those who declare the qualifications of technicians and senior technicians must also show their technical achievements and work performance certificates, and submit their technical summaries and papers.

3. Examination content

The national implementation of vocational skills appraisal is divided into two parts: theoretical knowledge examination and operational skills examination. Theoretical knowledge examination generally takes a written test. The assessment of operation skills can be carried out by means of job site operation, simulated site operation and question defense. These contents are determined according to the national occupation (skill) standard, occupation skill appraisal standard (namely examination outline) and corresponding teaching materials, and are appraised by writing examination papers.

Baidu Encyclopedia-Advanced Certificate of CNC Lathe

Baidu Encyclopedia-Vocational Qualification Certificate