Question 1: How to make a paper catalogue? 1. "insert->; Quote-> index and catalogue ";

2. Select the "Contents" tab, and pay attention to check the "page number right alignment" in it;

4. After the table of contents is automatically generated, if the text content is modified, please right-click the table of contents and select the "Update Domain" command in the menu to update the table of contents again. But this shows the wrong answer: 1. If the version has been arranged:

Title setting: Select View | Outline from the menu to enter the outline view. The outline toolbar will be displayed at the top of the document. In the outline toolbar, select a level from the text drop-down list, such as level 3, and set the first, second and third titles in the text according to the level.

Generate Directory: navigate to the location where the directory needs to be inserted, select Insert | Reference | Index and Directory from the menu, display the Index and Directory dialog box, and click the Directory tab. In the display level, you can specify how many levels the directory contains, thus determining the granularity of the directory. These levels range from "Title 1" to "Title 9", which correspond to the levels of 1~9 respectively. And select "Formal" in the format, and click OK to insert the directory.

2. If you haven't arranged the version yet.

Download the following template

Graduation thesis format template

Copy your paper into this downloaded template, select Format | Style and Format from the menu, and click the styles of "Title 1", "Title 2" and "Title 3" in the task pane on the right to quickly set the format of this title.

Generate Directory: navigate to the location where the directory needs to be inserted, select Insert | Reference | Index and Directory from the menu, display the Index and Directory dialog box, and click the Directory tab. In the display level, you can specify how many levels the directory contains, thus determining the granularity of the directory. These levels range from "Title 1" to "Title 9", which correspond to the levels of 1~9 respectively. Click OK to insert the directory.

Question 2: How to make a paper typeset catalogue? If the title format in the article is

Section 1 ... Title (1 level)

1. 1 ... Subtitle (Level 2)

1. 1. 1- Subtitle (Level 3)

……

Section N ... Title (1 level)

No. 1 ... Subtitle (Level 2)

N. 1. 1- ... subtitles (level 3)

Automatically generate article directory operation:

First, set the title format.

1. Select all the first-level titles in the article;

2. At the left end of the Format toolbar, click "Title 1" in the Style list.

Imitate steps 1 and 2, and set the format of secondary and tertiary headers as header 2 and header 3.

Second, automatically generate the directory.

1. Position the cursor to the left of the first line of the article on page 1 (the table of contents should be in front of the article);

2. Execute the menu command "Insert/Reference/Index and Directory" to open the "Index Directory" dialog box;

3. Click the "Contents" tab in the dialog box, make relevant settings, and then click "OK" to automatically generate the article contents.

Question 3: How to make a paper catalogue? 1. "insert->; Quote-> index and catalogue "; 2. Select the "Contents" tab, and pay attention to check the "page number right alignment" in it; 4. After the table of contents is automatically generated, if the text content is modified, please right-click the table of contents and select the "Update Field" command in the menu to update the table of contents again. But this shows the wrong answer: 1. If the table of contents has been arranged: Title setting: Select View | Outline command from the menu to enter the outline view. The outline toolbar will be displayed at the top of the document. In the outline toolbar, select a level from the text drop-down list, such as level 3, and set the first, second and third titles in the text according to the level. Generate Directory: navigate to the location where the directory needs to be inserted, select Insert | Reference | Index and Directory from the menu, display the Index and Directory dialog box, and click the Directory tab. In the display level, you can specify how many levels the directory contains, thus determining the granularity of the directory. These levels range from "Title 1" to "Title 9", which correspond to the levels of 1~9 respectively. And select "Formal" in the format, and click OK to insert the directory. 2. If you haven't compiled the version, download the following template. Copy your paper into this downloaded template, select Format | Style and Format from the menu, and click "Title 1", "Title 2" and "Title 3" in the task pane on the right to quickly set the format of this title. Generate Directory: navigate to the location where the directory needs to be inserted, select Insert | Reference | Index and Directory from the menu, display the Index and Directory dialog box, and click the Directory tab. In the display level, you can specify how many levels the directory contains, thus determining the granularity of the directory. These levels range from "Title 1" to "Title 9", which correspond to the levels of 1~9 respectively. Click OK to insert the directory.

Question 4: How did you get the automatically generated paper catalogue? 1. Click the Format menu and choose the Style and Format command. A style and format pane will appear on the right, including "Title 1", "Title 2" and "Title 3", that is, first-level title, second-level title and third-level title. First, select the text to be used as the corresponding level, and then click the corresponding level in the space on the right to set it as the title of the corresponding level.

(For example, just select all the words to be set as three-level titles, and then click "Title III" to go to the next step)

2. After setting, open the Insert menu, then the Reference menu, and the next step is "Index and Directory", which will pop up.

In the Index and Contents dialog box, there is basically no need to set the Contents tab. If you want special effects, you can set them or confirm them.

3. Finally, if the content changes, right-click the automatically generated directory and select "Update Domain" and "Update Whole Directory". Then, click OK! ~~

Question 5: How to make a catalog of graduation thesis in Word? As long as you set the format. 1 after the title. 2.3 After setting, just click Format-Index-Directory to generate it automatically. If your format is correct, try it: you can achieve your goal by using the "Insert/Reference/Index and Table of Contents" command. Note: Before using the above functions, you should first set the style used as the subtitle of the table of contents. Style setting method: select the title as the directory in turn, and click "Title 1", "Title 2" and "Title 3" in the style list on the left side of the format toolbar. If you just want to find a document collection, just set the title of the collection document to "Title 1". Or look at hi.baidu/...9..

Question 6: How to clear the directory format? The automatic directory generation is like this. Copy the full text, and then create a word document.

Edit/paste special/unformatted text/then confirm and try it. Even if you can't do it, it won't affect your original. If you can, you can attack it harder. Everything is ok unless there is a special chart. )

Question 7: How does 7:word 20 10/0 format the graduation thesis directory, jingyan.baidu/...9?.

Question 8: How to make a table of contents in a paper into one page? Set the next page to be changed in the footer at the bottom of the previous page.

Question 9: How are those dots typed out when writing the table of contents in word? The following is the method of automatically generating table of contents in Word2003, hoping to help friends:

First define the directory, click View → Outline to switch to Outline mode. In outline mode, the level of each paragraph in the document is clearly displayed. Select the title of the directory to be arranged, which is defined as "level 1". Then, according to the requirements, select the text set as the directory in turn and define it as "secondary" one by one. Of course, if necessary, you can continue to define "three-level" directory entries.

After the definition is completed, click View → Page to return to page mode, insert the cursor in the document where the directory is to be created, and execute Insert → Reference → Index and Directory to open the index and directory screen. Click the Directory tab, and the drop-down menu can modify parameters such as fonts and paragraphs.

If two-level directory entries are defined, change the number in the display level to "2", and you can choose according to your own needs. Show Page Numbers and Align Page Numbers Right are two recommended options. The former is used to automatically display the page where the directory item is located, and the latter is used to display beauty. Tab leader is the display symbol of the area between the directory item and the right-aligned page number, which can be selected from the drop-down list; In addition, there are a variety of directory display formats to choose from, which can be seen by pulling down "Format".

Finally, click OK to generate a table of contents, including page numbers. Hold down the Ctrl key and click a directory item, and the current page will automatically jump to the page number where the directory item is located. Is it convenient?

There is another advantage of using this method to generate directories. If you want to change the directory entry, you can switch to outline mode to adjust the content and level of the directory entry, then right-click the displayed directory entry and select Update Domain-Update the whole directory, and the directory can be automatically updated without any effort!

Question 10: How to automatically generate a table of contents in word2007 How to automatically generate a table of contents in word2007:

In normal view, click the small button in the lower right corner of the style area on the Home tab.

The Style box will open.

Stop the cursor on the first-level title, and then select the title 1 in the style. The purpose here is to add the corresponding format to the first-level title, and at the same time add the level and level of the title. )

4. Let's switch to the outline view.

Tip: You will find that there are only 1 and 2 ... you can press option-& gt；; Select all styles-> Press ok.

Let's start inserting the directory now:

1. Move the cursor to the location where you want to insert the directory, click the References tab, and then click the directory on the left. Select the automatic directory. Or, if you need to deal with the format of the directory or something, you can click Insert Directory.

Here are some options to choose from. There are three main types: there are many formats for you to choose from, such as templates, which are very easy to use. The line between the directory title and the page number can be preceded by a tab. Generally, there is no need to change the display level, and the accuracy to the third level is enough. )

3. Press OK when you are finished.

The problem is that your paper will change in the future, the title and page number will change, and the change of text will not be reflected in the catalogue immediately. When all the modifications are completed, update it: quote-& gt；; Update directory-> Update the entire directory-> Of course.