2022 locksmith training report experience 1000 words (1) The practice around is over. As for the overall feeling, it can only be summed up in eight words: "Although it is hard, it is very fulfilling". During these three weeks, I learned a lot of useful knowledge and deeply realized the hard work and greatness of the workers. Fitter practice is one of the compulsory courses for our mechanical and electrical specialty. Maybe we won't really engage in industrial production in the future, but the valuable experience left over in these three weeks will never be forgotten and will be used as the wealth of my life.
At first, it felt like a long time, three weeks. When can we spend this internship? However, in a blink of an eye, the last week has arrived and the last day is about to wave to us. Somehow, it was the last day we had been looking forward to, but when this day really came, we suddenly had a strong feeling of being inseparable from the internship, and really didn't want to be separated from you-the fitter internship. You let us gain infinite knowledge in happiness.
During my internship, I was deeply touched. Thank you very much for providing us with this internship opportunity, so that we can experience the difficulty of studying engineering in advance and gain knowledge that we can't get in class and can't expect. Maybe we won't take this post in the future, but the knowledge and feelings we have learned now are unforgettable. It's dirty and tired, but it doesn't matter. The important thing is that we have achieved and achieved results.
When I first started working, I was hunched over and sweaty. Some red "patterns" appear on my hands from time to time. But when I look back at my work, I feel that I am out of proportion to my efforts, and I am getting more and more upset. After being discovered by the teacher, I didn't know that my processing posture and parts were wrong until I explained patiently. After adjustment, it is slowly entering the state. But there are still many loopholes, such as forgetting the control of dimensional tolerance for a while and the coordination of flatness and verticality for a while. Every time there is a mistake, the teacher always comes to the side quietly and gives correct guidance. Making such a mistake will leave a deep impression on your mind and avoid similar mistakes in the future. In this way, the first part is completed. When I got the test from the teacher, many mistakes were suddenly realized after the teacher analyzed them. But every analysis and guidance left a deep impression on me. Completed the second, third and so on in turn. There is progress every time, but there are still mistakes every time, but there are fewer and fewer mistakes. This shows that my fitter is moving towards a higher level step by step, which makes me more confident.
It seems like a long time, but it's actually very short. During the break, teachers and students laugh together and have serious faces at work. Five hours a day passed quickly. I didn't feel tired until I got off work, but my heart was full. Although there are only five hours a day, it makes me feel the working atmosphere, which I have never felt before.
Everyone has to learn new skills every day, and during the five-hour internship, he can complete the process from knowing nothing about all kinds of work to making a finished product. With the patient and meticulous teaching of teachers and our active cooperation, we basically met the expected internship requirements and successfully completed the three-week training. During the training, by learning locksmith. We made our own handicrafts. The fitter is the most exhausting. With the help of files, hacksaws and other tools, the iron block is manually polished into the required shape, and then the workpiece is finally made by punching and tapping. After one afternoon, although many students had blisters on their hands and felt sore all over, it was the first time for everyone to see the finished products made in the factory, and they were overjoyed and had a sense of accomplishment. My experience from this training is as follows: firstly, in the process of understanding, being familiar with and mastering certain basic engineering knowledge and operation skills, we have cultivated, improved and strengthened our engineering practice ability, innovation consciousness and innovation ability. Second, the concept of labor, quality and economy has been cultivated and exercised, and the awareness of observing labor discipline, safety technical regulations and caring for state property has been enhanced, and the overall comprehensive quality has been improved. Thirdly, in the whole training process, teachers have strict requirements on our discipline, and at the same time, they have strengthened the requirements of filling in the practice report, cleaning the workbench and observing the safety operation rules of various types of work, which has played a good role in promoting the cultivation of students' comprehensive engineering quality. Fourthly, the training teacher announced the grading standards of our processed products to us, which made us have a clear understanding of the grading of our products and played a certain role in improving our quality awareness. We should examine the training results of our locksmith one by one, so as to take every job and every practical link seriously.
I think every training is very meaningful and practical for myself. They added a wonderful stroke to my college life. Let me get closer to the life of skilled workers, let me grow more professional knowledge, and let me realize my own advantages and disadvantages. One year later, when we are employed, the employment unit will not tell us the work to be done in detail like the teacher, but we need to observe and learn by ourselves. Without this ability, it is difficult to be competent for future challenges. With the rapid development of science and the wide application of new technologies, there will be many fields that we have never touched. Only by daring to try can we make a breakthrough and make innovations. Just like a locksmith, filing seems simple and needs our careful observation and repeated practice. If we fail, we will start again, which cultivates our frustration and so on. The three-week training has not brought us all the operational skills we have been exposed to, nor is it just the ability we need to exercise through several types of work. More importantly, we need each of us to feel, reflect, encourage ourselves diligently and gain something after the internship, so that this training can achieve his real purpose.
To sum up, although what we learned in the ten-day internship is only skin deep for technicians, everything has a process. What we have learned is the foundation, and technicians have "evolved" from simple to complex. The locksmith's internship is coming to an end. In the end, everyone was very happy, because everyone learned something real, whether it was good or not, whether it was really mastered, at least let us know what workers do, which is also helpful in the future.
2022 fitter training report experience 1000 words (2) We had a fitter training class this week, which benefited a lot on the whole. At first, my mood was full of doubts. What I don't understand is how we computer students can do such a job as locksmiths! But now that I think about it, I have learned a lot of extracurricular knowledge, and some things can benefit me for life. How precious!
This is undoubtedly a transition between theory and practice, from safety education, action essentials, the use of tools, to the actual operation of taking files. Some things are to be explored by yourself, and some things are to be discovered from theory and applied to practice. From the beginning of polishing the plane, I understood that it is not that simple to do a good job, and it needs to be proved by practice. What you see is not necessarily true (the plane looks flat, but its shortcomings can be found by measuring light); This reminds me why the school wants us to practice here, because the school wants us to understand the value of learning. Learning needs the same meticulous spirit as polishing an airplane to do its best, and it also makes us realize the importance of hands-on. It's not enough to just study theory. Without practical experience, you can't find your own practical ability, which requires the combination of theory and practice. It needs the cooperation of mind and hands.
From plane grinding to scribing and dot; From shaping to drilling; From reaming to tapping, what I learned at every step was something that others could not take away.
From here, I know what a fitter is. The main contents of a fitter are marking, chiseling, filing, grinding, drilling, reaming, reaming, tapping and so on. Understand the structure of the file; Classification, selection, filing posture, filing method and quality inspection. The experience of fitter's internship has tempered us and improved our overall comprehensive quality, which not only makes us deeply understand the significance of fitter's internship, but also improves our practical ability, so that we can better combine theory with practice. Consolidate what we have learned, and at the same time let us learn the professional quality of teachers. The teacher took pains to find out the mistakes in our homework for us. We also carried forward the spirit of unity and mutual assistance and enhanced the friendship between our classmates.
During the internship, we achieved the fruits of our labor-exquisite nuts. Looking at this exquisite work, it turned out to be polished by myself, and my pride and sense of accomplishment are hard to express in words. I didn't expect that something that was so big at the beginning has now become a beautiful workpiece and has been ground out at once. This is what people say, "As long as you work hard, the pestle can also be ground into a needle"!
This week's internship was short and hard, but what I learned was valuable, which made me realize the hardship and happiness as a worker and consolidated my knowledge, which left me with good memories.
2022 fitter training report 1000 words (3) The two-week fitter training is over. Although we are very tired in training, we are very happy, because we have learned a lot of useful things and exercised our practical ability. Although the training period is only two weeks, it is only a small part of our three-year college life, but it is a very important part. It's hard for us to forget. After all, it is a real experience of society and life.
To carry out locksmith training, safety issues must be put in the first place. Through the master's explanation, we learned about the dangerous operation actions that students are easy to make in training. For example, fighting in the workshop, operating the machine tool without the permission of the master, incorrect method and posture during operation, and so on. An unintentional action or a small negligence may lead to mechanical accidents or even personal safety accidents.
Through this locksmith training, I learned the basic knowledge and operation methods of metalworking. Mainly learned the following knowledge: the basic types of metal processing are fitter, lathe worker, casting welder and so on.
In the training of locksmiths, we know that the main contents of locksmiths are scraping, drilling, tapping, sawing, filing, assembling and marking; Understand the structure, classification, selection, filing posture, filing method and quality inspection of archives. First of all, we must get the right gear. It is the key to keep the file moving in a straight line when filing the plane. There are two kinds of filing force: horizontal thrust and vertical pressure. When pushing the file forward, the front hand pressure gradually decreases, and then it decreases when pushing the file to the middle position, and the pressure on both hands is the same. When pushing the file forward, the front hand pressure gradually decreases and then increases. No pressure is applied when the file is returned. This will make it easier for us to file. At the same time, I also know that the locksmith's safety technology is:
1, the clamping table should be placed in a place convenient for work and suitable for light; Drilling rigs and grinding wheels should generally be placed on the edge of the site to ensure safety;
2, the use of machine tools, tools (such as drilling machine, grinding wheel, hand drill, etc. ), should be checked regularly, found damaged shall not be used, need to repair the rear can use;
3. When clamping tools in a vise, it is forbidden to use a hammer to beat the handle or steel pipe of the vise to exert clamping force.
Then scrape, grind, drill, hinge, tap and so on. Although it is not very standard, it is the crystallization of our sweat and the result of our two-day struggle.
To tell the truth, locksmith training is boring. He may have been doing an action repeatedly all morning, but he should be strong and do it just right. That is, a file that goes back and forth on the workpiece with a file. By noon, the whole person's hands were sore and his legs were stiff. However, when he is tired, he can see the teacher personally guiding and demonstrating. He is also sweating and panting. A few days later, looking at my own processing results, I want to say thank you to the teacher who guided us.
It is often characterized by high labor intensity and low scientific and technological content, but some basic knowledge can be applied in practice. In a word, although what we have learned after ten days' training is only a scratch for technicians, everything has a process. What we have learned is the foundation, and technicians have "evolved" from simple to complex. The most gratifying thing is that no students were injured in these training jobs with different degrees of danger. On the contrary, some sweet smiles will appear from time to time during the training, which is inseparable from the seriousness and intention of the students. Locksmith training made me feel the pain and joy of being a worker, and also tested my knowledge. Locksmith training made me deeply realize the meaning of life-nothing is difficult in the world, as long as you work hard and grind the iron pestle into a needle!
2022 locksmith training report 1000 words (4) I found my own shortcomings in locksmith training, realized some points that need attention in the processing process, and learned something that I can't learn in textbooks. As a locksmith, I not only have the necessary knowledge, but also my practical ability. But also let me deeply understand the great poet-Li Bai's famous saying: as long as the kung fu is deep, the iron pestle is ground into a needle!
As a locksmith, through several years' study and work, I feel that my feelings have been tempered and my overall comprehensive quality has been improved, which not only makes us deeply understand the significance of locksmith's internship, but also improves our practical ability, so that we can better combine theory with practice.
The locksmith, a seemingly simple type of work, has rich connotations and the saying that "the lathe is great and the locksmith is omnipotent". It is not a simple file grinding, but a basic skill, which can exercise our will. Any small technology is a science, which needs constant study and serious research. It is also necessary to study the seemingly simple bit grinding. To be a good locksmith, you must first have enough patience, secondly have enough physical strength, and finally have a flexible mind. Because locksmith is a type of work with high labor intensity, low production efficiency and high operating skills. The tools he used were simple, varied in processing, flexible and adaptable, and he could accomplish some tasks that could not or were difficult to carry out in processing. In today's era of developed processing industry, although backward, he can't replace Jobs.
Locksmiths seem simple, but training is boring. It takes the same foot strength as a horse to keep an action station, check an action, saw or file a day. After a day's work, the backache may not be finished, and it may be scrapped. If there is the possibility of scrapping, we should do it seriously and measure and verify it repeatedly. It is not enough to be careful, but also to work boldly, just like making a workpiece. If you don't leave as little margin as possible when sawing, it will take one or several times of time and energy to process the workpiece when pushing the file. Therefore, as a qualified fitter, we must be "bold but cautious".
When it comes to locksmiths, many people will find it useless. Who will learn that thing in which era? Dirty and tired, it is better to learn CNC machining center. When I first started learning, I was so tired that I bent over and sweated. Some red "patterns" appear on my hands from time to time. I tried to saw the material in a straight line, and as a result, several saw blades were broken. The saw blades were crooked and I couldn't control them. Why did my file end up uneven? Often one side is high and the other side is low, and the other side is small. Finally, the size is good and the surface roughness is not good; Looking back at my own labor achievements, I feel disproportionate to my own efforts, and I am getting more and more agitated. After the master's explanation, I realized that my processing posture and parts were wrong. After adjustment, it is slowly entering the state. But there are still many loopholes, such as forgetting the control of dimensional tolerance for a while and the coordination of flatness and verticality for a while. Finally, through the continuous guidance and analysis of the master and his own practice, I feel that it is worthwhile to pay the sweat to make a workpiece that meets the requirements of the drawings.
In today's scientific development, the competition between enterprises is the competition of talents. Only by constantly cultivating technical talents and improving the technical level of employees can we better meet the development needs of current enterprises!