The annual 1 20xx inspection tour in the annual work summary is coming to an end. Under the leadership of the clinker branch and the guidance of the idea of "safety first, prevention first", the workshop work has successfully completed the monthly and quarterly production targets.
1. Educate employees on the responsibility system for production, publicize various safety production management systems, timely rectify potential safety hazards in work, minimize work safety risks, and effectively prevent accidents. Educate employees who enter the work to improve safety awareness, prevent accidents at work, and often communicate with workshop employees, so that workshop employees can pay attention to the key points that are prone to accidents at work and reduce the risk factor of safety accidents.
2, in-depth equipment inspection, inspection of equipment, timely repair and rectification of equipment hidden dangers. Do the principle of no hidden dangers in work and ensure safety in production.
3. In case of high temperature weather in xx, in order to prevent heatstroke, the workshop section will receive heatstroke prevention and cooling drugs distributed by the branch and distribute them to every employee, and at the same time, reasonably arrange employees' rest time to prevent heatstroke.
4. Carry out publicity and education on fire safety awareness for employees in autumn, and focus on checking whether the fire extinguishers are normal. Replace the fire extinguishers in time if any abnormality is found, but make sure that the fire prevention work is foolproof.
5. At the request of the company, the workshop carried out the software and hardware construction in a timely and reasonable manner according to the safety standardization, and achieved certain results, which was successfully completed in the safety standardization acceptance.
At present, it has entered the winter production for xx months, and it is necessary to do a good job in winter production safety. In the safety production in xx month, the following points should be achieved:
1, according to the characteristics of winter, do a good job in employee safety education. Workshop teams and groups use the pre-shift meeting, and departments and offices use the weekly work meeting to carry out anti-skid, anti-falling, anti-electric shock and anti-mechanical injury (scratch) education. It is forbidden to wear coats, heavy clothes and high heels to work, to go to work after drinking, to connect the power cord privately and to use high-power lamps and appliances (except air conditioners) to heat and bake clothes.
2. Strengthen on-site inspection and supervision, and prohibit the occurrence of "three violations".
3, ahead of time to do a good job of antifreeze protection of equipment and facilities in winter, to ensure the safe operation of equipment.
Annual inspection work summary 2p>；; Time flies. I've been working in the company for almost a year in a blink of an eye. Feel a lot and gain a lot. Entering Longhe Sewage Treatment Co., Ltd. is a good development opportunity for me, and it is also a good opportunity to exercise and improve my various abilities. Here, I would like to thank the company leaders and colleagues for their strong support, care and help, so that I can quickly adapt to the company's management and operation process and strive to do my job well. Looking back on the past year, under the careful care and guidance of leaders and colleagues, through our unremitting efforts, our work has made some achievements, but there are still many shortcomings. The work is summarized as follows:
First, ideological study.
In this short year, with the help of the company's leaders and colleagues, I worked hard to do my job according to the requirements of post responsibilities and code of conduct, and earnestly completed all the work assigned by the leaders, and my ideological consciousness and working ability have been greatly improved. Ideologically positive, law-abiding, dedicated, with a strong sense of responsibility and dedication. Actively study professional knowledge, have a correct working attitude, be serious and responsible, and have good ideological and political quality, ideological quality and professional ethics.
Second, the work attitude
In terms of work attitude and hard work, I love my job, can treat every job correctly and seriously, can actively find my own shortcomings, and learn to supplement them in time. Carry forward the fine tradition of being hard-working and helpful in life, always be honest and trustworthy, work diligently, unite colleagues, be pragmatic and optimistic, and always maintain a rigorous and serious work attitude and meticulous work style.
Third, work ability and professional knowledge.
This year, I mainly studied electrician maintenance knowledge with my master. After studying for ten months, I transferred to my present post for prosecution. Now the electrician summarizes as follows:
When I first arrived in the electrician team, I didn't know much about the company's electrical equipment and didn't have enough work experience. Fortunately, under the patient guidance and instruction of my master and colleagues, my work began to improve, and I was able to do some relatively simple electrical maintenance work slowly. When the master began to teach me the knowledge of electrical maintenance, the first thing to do was to be familiar with the working environment and the electrical equipment to be maintained, which was the basis of my work.
After getting familiar with the environment and equipment of each workshop, the key point is to further understand the electrical situation of each equipment by consulting relevant materials, manuals, drawings and instructions. The paper alliance collects and sorts out the gas operation, electrical principle, common faults and common troubleshooting methods. These materials are very useful and necessary for maintenance. Now the equipment is more and more advanced, especially the surface exposure machine, which has perfect self-diagnosis ability and fault display function, can self-diagnose common faults and display fault codes for power supply workers and maintenance personnel to find and maintain.
Engaging in electrical maintenance requires extensive knowledge. Nowadays, with the rapid development of science and technology, electronic components and electrical equipment are updated quickly and there are many kinds. In addition to common electrical knowledge and electrical maintenance technology, we should also master certain mechanical maintenance technology. At present, equipment failures are no longer clearly divided into electrical failures and mechanical failures, and many of them are mixed electrical and mechanical failures, so it is beneficial to be familiar with all aspects. Therefore, as long as I have free time, I will read relevant books, constantly enrich myself and improve my knowledge. In addition, I will enrich myself by consulting my master and searching for information on the Internet.
In addition to mastering theoretical knowledge, the most important thing is to keep practicing and accumulate a lot of work experience. Rich practical experience and solid theoretical knowledge, it is handy to repair electrical faults. Master Ding Bofeng has rich experience and is handy in repairing electrical faults. Every time there is a maintenance task, I will follow him to the maintenance site. By observing his maintenance process, I can understand how the master found the cause of the fault and how to eliminate it. By being his maintenance assistant, he participated in maintenance work, exercised maintenance ability from practice, mastered certain maintenance methods and skills, and increased maintenance experience.
In the practice of these months, I have learned a lot, such as: in the process of inspection, we need to pay attention to the smell and sound of equipment, the temperature, color and quality of electrical components. Use clamp multimeter, 500v shaking table and various tools. How to maintain the motor, change the bearing and gearbox oil, etc. The electrical control schematic diagram of lift pump, Rhodes blower, sand-water separator, screw conveyor, propeller and agitator power distribution cabinet is drawn, and the electrical schematic diagram of fine grid, bridge sand suction machine, sludge reflux pump, surplus sludge pump and secondary sedimentation tank power distribution cabinet is rearranged. Print in triplicate, one for each distribution cabinet, one for review and one for filing. Each equipment chest of drawers stops the power transmission operation, and the street lamps start and stop at night to control the time operation. The high and low voltage power distribution room in the factory stops power transmission and switches. The generator generates electricity and stops sending electricity. Maintenance and replacement of electrical components. Connection of three-phase electricity and two-phase electricity in the factory.
For example, examples of finding and eliminating electrical faults of motors.
Electrical aspects:
1, check whether the insulation of outgoing wires is intact, whether the motor is overheated, whether the wiring meets the requirements of nameplate, and whether the winding and head and tail are correct;
2. Measure the insulation resistance and DC resistance to see if the insulation is damaged. Whether the winding is open, short-circuited and grounded;
To become a qualified electrical maintenance personnel, in addition to the above points, we must have a high sense of responsibility and good professional ethics, have relatively complete knowledge, skills and experience, have extensive knowledge of electrical safety, and be modest and self-motivated. I believe these will be enhanced with my maintenance experience.
Since the central inspection work, I have to clarify the responsibilities, tasks and division of labor, so that safety production and safety management can be organically connected and all the work can be completed in an all-round way. Attend the pre-shift and post-shift meetings seriously and implement the handover system.
Our main responsibility is to control the process, ensure the orderly production of our factory throughout the year, and ensure that the effluent basically reaches the standard by adjusting the process in time throughout the year.
During the inspection, you must walk in pairs, carry walkie-talkies and protective equipment, and take protective measures. Patrol inspection must be in place. Carefully observe the operation and technical conditions of the equipment to ensure that it meets the technical requirements, hygiene requirements and environmental requirements. Do it: walk, see, listen, smell, think and write. Discover and eliminate potential safety hazards in time, and nip them in the bud.
The purpose of our factory is to ensure safe operation and steady development, which illustrates a major problem. Safety is the premise of the factory. Only by doing a good job in safety can normal production be guaranteed. Therefore, we should always learn relevant safety knowledge, improve our safety awareness and warn others to pay attention to safety, so as to ensure normal and safe production.
Four, the existing shortcomings and plans for the next year.
When I was in the electrician team, I participated in the maintenance work and found some shortcomings in the current electrical management. Maintenance work is not done well enough. Many electrical equipment in the workshop is old and damaged, and the lines are wet and messy. In addition, the workshop is wet all the year round and full of water mist, which is easy to oxidize the lines and electrical components, leading to poor contact and various electrical failures. Don't repair the electrician if he has a fault, he will be idle if he has no fault. They should often go to the workshop to check the operation status and wiring of electrical equipment, do a good job of maintenance, and immediately start troubleshooting if any abnormality is found. Although some anomalies are small, we should pay attention to them, or they will cause failures after a long time. There are also some wires that are redundant. In order to reduce failure factors and facilitate maintenance, it is best to remove them. Only when the equipment is well maintained and works normally can we make full use of the equipment and create great benefits. However, once the equipment (especially the surface exposure machine) breaks down, it will affect the production of the workshop. If there is a big fault and the production is stopped for too long, it will cause huge economic losses to the company.
The third chapter of the annual work summary of the patrol sent away the green leaves and red flowers, ushered in the boundless snow, accompanied by rapid steps, served as the screw of society, with the expectations of enterprises. In a blink of an eye, the years of 20xx passed quietly. Looking back, there is really a kind of sadness that I can't understand clearly. The year of 20xx is not a year of ups and downs for my life journey, but it is also dotted with many colors. Since I set foot on the train in Xinjiang, it has doomed my direction this year. Of course, xx Iron Industry has treated me sincerely, and I am honored to feel the charm of Jin Hao. Looking back on this year's work, we, as a large group of mechanics, have worked hard, been unpretentious, and pursued truth-seeking, and earnestly completed various tasks arranged by leaders and departments at all levels. As a member of the machine maintenance workshop, always keep in mind the company's purpose and understand your responsibilities; Take an active part in all kinds of work, strictly demand that you be meticulous in your work, cooperate with everyone to make a good start, and at the same time study relevant professional knowledge seriously, and constantly improve your professional theoretical level and comprehensive quality.
In 20xx years, under the careful care and guidance of leaders and masters, and on the premise of good relations with colleagues, through our unremitting efforts, we have made certain achievements in our work. Of course, the guidance of masters is indispensable, but there are also many shortcomings. Looking back on the past year, the work is summarized as follows:
1. Appreciate the corporate culture and feel the charm of the enterprise.
Enterprises always keep in mind the concept of "safety first, prevention first". When I first joined the company, I should do a good job in my three-level safety education, summarize and assess me regularly, and insist on studying safely before and after work every day. Strengthening my safety awareness, whether old employees or new employees, requires us to start from ourselves, change what we have, and encourage what we have not, so that the concept of safe production can be deeply rooted in the hearts of the people.
In the work, under the leadership of the working group with Ren as the monitor, the work in the raw material area is well organized, and the leadership is people-oriented and makes the best use of everything. Fully understand the personality, hobbies and specialties of each of us, make full use of our young people's resource advantages, discuss and negotiate difficult issues in time, patiently and willingly guide us to strengthen our skills and work enthusiasm, so that our work can be carried out in an orderly and steady manner and our team can grow healthily and actively.
Leaders attach great importance to our team building and constantly strengthen measures to keep our team building on the right track. In this process, I learned a lot, how to be an excellent individual and how to take into account the collective concept of honor and disgrace of the team. We are required to be clear and unified in thinking, insist on regular ventilation, be diligent in consultation, and base our work decisions on collective wisdom so that everyone can have the opportunity to show themselves and the right to speak. There are leaders and subordinates in the work. In the formulation and implementation of the work plan, we can learn through discussion. Everyone is equal, giving everyone a free and relaxed working atmosphere. Aim at the same goal in action, carry out their duties and responsibilities, always maintain first-class work spirit and strong fighting spirit, and constantly create a new situation in work.
The company can well implement the people-oriented spirit, carry forward the fine fashion of poverty alleviation, mobilize all the strength of the whole factory to jointly promote the work of helping employees in difficulty, and carry out fund-raising activities to help employees in difficulty throughout the company. After learning that Tong was involved in a car accident in August this year, the company learned that the family was in a difficult situation and was seriously injured. At the first time, I took out 30,000 yuan and actively organized cadres and employees to respond to this activity. The fund-raising activities are in full swing, and everyone's enthusiasm is unprecedented. Although the amount is not much, it fully reflects the positive attitude of all employees of Jinhao Company towards this work and their infinite love for the poor people in society. This is all the result of company teaching.
2. Contribution to the company.
Blending into the new environment and feeling the new pattern, everything slowly enters my life from strangeness and interweaves with me, and my every move, words and deeds have new meanings. For the new job, besides studying, I try my best to solve it, apply what I have learned, combine the present situation, use the right time, the right place and the right person. I am a member of the raw materials team. Of course, the raw material crane, grab bucket, belt corridor, main dust removal system, fan room motor, reducer ... all the equipment participated in the maintenance. There is also a baking group and a finished product group interspersed among them. I was in the whole factory, so to speak. Although my strength is small, my value is equal.
Part-time security officer has been demanding my responsibility from another level. I want to cooperate with the regulations of the workshop, keep records of safety meetings before and after work every day, organize and coach everyone to actively carry out safety learning, communicate with you in time and share new knowledge about safety production. Organize regular safety inspections, share your thoughts and feelings, make up for your own shortcomings, and implement the safety plan into the work plan.
In the production process, in addition to doing a good job of daily inspection, I also play an important role in the newly established refueling team. Mechanical lubrication is like human blood. If the equipment lubrication and maintenance are not in place, the consequences will be quite serious. Therefore, our work is particularly important and necessary. Don't be careless for a moment, keep records at all times, and conduct random checks from time to time, down to every dead corner, every rotating part and every operating equipment. It can be said that sometimes it is equivalent to walking a few kilometers to visit the whole factory more than once!
It was a new page in my life in the struggle wave of new construction sites in the later period. I have never worked on a construction site before, and I never thought I would work on a construction site. This new model tested me, and this hard condition tested me, which made me a little at a loss. I can't say how well I have done, whether it's steel bars or a bag of cement, even a brick, if I don't move it, it will probably be there. Without these basic profiles, will the project be smooth, so I have tried my best and really can only do these.
3. Shortcomings in work.
With the improvement of enterprise system, reform and innovation are imperative. It is necessary to make suggestions, but my contribution in this respect is still quite small, and my confidence is 100%.
Many subtle places and fields in the work are still not done in detail. Of course, nothing can be done, but I believe there is nothing but better. As long as we always adhere to this unchanging belief and determination not to let go, any flaws will disappear under our supervision and inspection.
4. Hope for the coming year.
In terms of safety, collect more safety knowledge and create a good learning atmosphere when the work tasks are successfully completed. It is hoped that the company will increase its investment in safety to ensure the company's more stable growth.
Skills, actively participate in various activities organized by the company, actively participate in training and learning, increase knowledge, enrich experience and improve skills.
In terms of improvement suggestions, everything should proceed from reality, whether it is production or life. As long as you have good ideas and suggestions, you should actively make suggestions.
Due to the burden of family and the urgency of personal marriage, I hope my salary can be raised appropriately, and of course my personal contribution will be more.
In short, in the 20xx years of work, I will continue to work hard, study hard, establish a correct Scientific Outlook on Development and outlook on life, make up for my shortcomings, strive for greater progress, be a wise man and do things in a down-to-earth manner. Strive to improve cultural quality and various professional skills, and make due contributions to xx steel industry!
Annual work summary patrol inspection (4) Under the correct leadership of the company and the branch factory, with the cooperation and support of the brother units, and with the joint efforts of all the staff in the workshop, a total of 20,000 tons of high-quality clinker was produced. Exceeded the annual production task. Looking back at 20xx, our firing part mainly works from the following aspects:
First, the basic management:
1) Under the guidance of the branch factory, our burning section takes daily work as the starting point, strengthens internal management, and pays close attention to labor discipline and work execution. Further improve and refine the rules and regulations, make the job responsibilities clearer, and make the assessment system more standardized and clear. Only when there is pressure on people's heads can the pressure be effectively decomposed and transmitted, and everyone has the motivation to do things. Do the work in a planned, layout, requirements, implementation, inspection and assessment. At the same time, the workshop management personnel earnestly study the rules and regulations and the spirit of documents of the company and the branch factory, timely and effectively convey the spirit of instructions of the company and the branch factory, so that employees can clearly understand the production situation and work priorities of the company and the branch factory. The workshop checks the implementation of employees' work every day, rewards and punishments the inspection results in time according to the system, and the assessment results are publicly posted on the wall. So that employees can clearly understand their own work deficiencies and the assessment situation of the month, actively look for the contrast gap, mobilize employees' work enthusiasm and urge employees to rectify their work deficiencies in time to avoid the phenomenon of hitting employees' work enthusiasm because of irregular assessment.
2) In terms of operation management, the goal is stable operation and the lifeline is logistics transportation line. In order to check both ends, block the middle, stabilize the material and ensure smooth transportation. In the first half of the year, due to the prolonged service life of refractories, materials piled up at the entrance of C 1A, the inner cylinder hanger fell off, and the preheater was blocked for six times, so the production was very passive. Under the guidance of the branch factory, our workshop learned from a painful experience, carefully searched and summarized the bottleneck factors that restricted the production operation, actively coordinated and utilized the resources of the branch factory, evaluated the equipment and process operation of the sintering workshop, and formulated the maintenance plan through hidden dangers investigation. The leaders of the branch factory reviewed the maintenance plan for many times. Under the organization of the branch factory, the planned maintenance was carried out within three months of xx, which eliminated the hidden dangers affecting the operation in time. At the same time, on the basis of the three-level spot check in the branch factory, our workshop has formulated a detailed spot check cycle and spot check plan, and put the responsibility on people. Through spot checks, we can make up for the lack of inspection and formulate new hidden danger monitoring measures in time. Pay special attention to the quality of the pre-maintenance of the two mills, and assign a special person to be responsible for it, so as to reduce the downtime rate of the mills from 10 times per month to 2-3 times per month, and realize zero failure downtime for many times. In the use of standby machines, regular switching maintenance ensures the intact rate of standby machines. So as to ensure the long-term safe and stable operation of the rotary kiln and lay a solid foundation for completing the annual production task.
3) In terms of team management, democratic life meetings are held regularly, instead of "centralized discussion", employees' reasonable suggestions are actively listened to and adopted, and employees' reaction problems are solved in a timely manner. If it cannot be solved within our responsibility, we will report it to the factory in time. Pay attention to communication with employees at ordinary times, keep abreast of their ideological trends and care about their health. The change from one-person management to all-people participation in management has fully mobilized everyone's management enthusiasm and improved the initiative of employees. From the pursuit of work efficiency to the pursuit of work results, we have enhanced employees' self-confidence and sense of ownership. From the past "want me to do" to what I want to do. We added a water dispenser in the lounge for the convenience of employees. Through communication and heart-to-heart, we can participate in management together, improve the centripetal force and cohesion of employees, and make our burning section a team that dares to fight and fight.
Second, environmental management:
According to the requirements of clean and civilized production in the branch factory, we have strengthened the management of "running, running, dripping and leaking" on site, focusing on centralized treatment of oil leakage from various oil stations and equipment, which not only reduces the oil pollution and the labor intensity of employees, but also reduces the difficulty of equipment hygiene management and greatly stimulates the enthusiasm of employees. We tracked the operation of bag dust removal and electric dust removal, sealed the air leakage point, replaced the soft connection of electric dust removal and adjusted the internal vibration. In view of the serious ash leakage problem of the grid wheel of bag dust collection in coal mill, the research was carried out in cooperation with the maintenance department. Taking the opportunity of pre-maintenance of the mill, the seals of 20 grid wheels were reformed, which completely solved the secondary lifting and sinking of bag dust collection. We have also strengthened the environmental sanitation management of large venues, thoroughly cleaned up the dead corners of the venues, and chartered equipment to people. The field equipment is basically natural, with no dead angle, bright windows and no white garbage. Let's work in a comfortable working environment.
Three. abstract
20xx was a year that benefited from management, time and difficulties, and it was also a year that we made great efforts in technological transformation. With the unremitting efforts and running-in of employees in the whole region, all the work in the workshop has been on the right track, with in-depth and fruitful management and obvious achievements. Jin Jianxin appears, and 20xx will be even better!
In order to ensure public safety and user's gas safety, and ensure the safe and stable supply of natural gas in the whole region, according to the spirit of the Notice of Chongqing Economic and Information Committee on Further Strengthening the Safety Inspection of Urban Natural Gas Houses, our company actively strives to guide gas users to use gas safely and economically, and conducts regular safety inspections of gas facilities in strict accordance with the Regulations on Natural Gas Management in X City (Revised) and the Regulations on Urban Gas Management.
Gas safety for users is the focus of gas safety work. Indoor gas accidents have always been a frequent and prone area. After the gas accident, it is an important link of gas safety management, which has great harm, loss and influence. Therefore, we have done a lot of work in family safety inspection.
First, establish and improve the norms of household safety inspection, and strengthen the training of gas safety knowledge and operation skills of security personnel.
According to the requirements of household safety inspection, the company has set up a customer safety inspection administrator for household safety inspection, and formulated a reasonable annual safety inspection plan and monthly household safety inspection implementation plan to ensure that all users within the gas supply range are in place. The Management Measures for Household Safety Inspection of Customer Administrators formulated by the company stipulates that customer administrators must conduct X household safety inspections every year, publicize the knowledge of safe gas use, consciously abide by customer service requirements, carry out safety inspections seriously, and prohibit "eating, taking, using, using cards and demanding" and illegal charging behaviors. The annual household rate adopts the working mode of "four fixed" (fixed person, fixed film, fixed time and fixed completion quantity), and carries out household inspection item by item. The annual occupancy rate of customer administrators must reach 90%. At the same time, all management stations are required to conduct self-examination on the household entrance rate every month, and the safety supervision department checks x% every quarter, and the completion is included in the annual target assessment. In order to strengthen the household safety inspection, the company also increased the training of customer safety management personnel, and organized employees to participate in various system training and skill training for many times, which greatly improved the professional quality and safety awareness of customer safety management personnel. Strive to make every customer safety administrator familiar with the content and importance of home safety inspection.
The second is to do a good job in the content of household inspection, timely investigate and rectify potential safety hazards, and make inspection records.
Household safety inspection work must be "task-oriented, clear responsibilities, clear content, process-oriented, standardized behavior and timely rectification". Household safety inspection focuses on the implementation of responsibilities and the investigation of hidden dangers, so the customer administrator is required to conduct household inspection in strict accordance with the seven contents of household inspection. The main problems found in the usual home inspection work are
(1) air leakage.
Because residents' safety awareness is weak, many residents forget to turn off the gas valve, or there are no flameout protection measures in gas appliance, and some houses have been uninhabited for a long time, resulting in air leakage.
2 The hose is aging, and both ends of the hose are not fixed with hose clamps.
According to relevant regulations, the service life of natural gas hose is 2 years. During the security inspection, we found that many users have used natural gas hoses for more than 5 years, which is seriously aging. It is more common that both ends of the hose are not fixed with hose clamps.
(3) private pull and random connection.
During the security inspection, it was found that there was private connection in the community, and some users even buried the gas pipeline under the wall and floor. Many users employ unqualified personnel to modify and package gas pipelines without any acceptance procedures, and the quality of the materials used is not guaranteed.
(4) Double fire sources.
Some users use liquefied gas while using natural gas. Once the gas leaks, the consequences are unimaginable. At the same time, the use of liquefied gas will also cause corrosion to gas pipelines and gas meters.
5] Natural gas cookers and water heaters are out of service.
According to relevant regulations, the longest service life of natural gas cookers and water heaters is 8 years. During the safety inspection, we found that the natural gas cookers and water heaters were seriously out of service, and there were certain safety hazards.
In view of the main problems found in household security inspection, our company held several safety meetings to study and discuss, and formulated corresponding solutions. For some air leakage phenomena, we will inform the user of the danger in time and form the habit of closing the valve after use; For households with aging hoses, they are required to replace hoses in time and increase hose clamps; For some gas meters and pipelines installed in confined spaces due to decoration, we have ordered them to be dismantled, and reminded users that if it is really necessary to move pipelines, qualified personnel should be invited to design, construct and install them; For the phenomenon of private connection, we made timely rectification; For households with double fire sources, users are also ordered to dismantle them in time; For aging and leaking gas appliance, we immediately inform users to replace the stove. In a word, in the process of security inspection, the customer administrator tries to eliminate the hidden dangers on the spot for the residents with gas safety hazards. Register the households that can't eliminate hidden dangers that day, and the company's maintenance personnel will come to help users eliminate hidden dangers on a certain day and give safety guidance.
Three, to further strengthen the popularization and education of gas safety knowledge, increase the publicity of gas safety knowledge for users.
Gas safety concerns thousands of households. In order to make the gas safety inspection work solid and concrete, and ensure the safe and smooth use of natural gas by users within the jurisdiction, the company first continuously improves the professional quality of the customer safety inspection administrator, and can publicize the gas safety knowledge to every household in a timely, accurate and effective manner during the household inspection.
The company has organized safety publicity activities into communities and enterprises for many times, and vigorously publicized the common sense, precautions and gas specifications for users to use natural gas safely, and guided users to use gas appliances correctly. So as to improve the awareness and ability of community residents to prevent gas safety. The company uses newspapers, TV stations, projectors and users to publicize the safety knowledge of accident cases, and also prints warm reminder boards to be posted in various communities and enterprises, and has done a lot of publicity work to ensure safe gas supply and safe gas use! Through the inspection of household gas safety, the company eliminated a number of gas safety hazards in time, and the annual household rate reached 90%. The safe use of natural gas is related to the safety of users' lives and property. Therefore, doing a good job in safety management is the basis to ensure the stability of safe production. Our company will constantly improve the system and norms of household safety inspection, constantly improve the professional quality of customer safety inspection administrators, and constantly strengthen the management and supervision of household safety inspection, so as to truly nip in the bud. Safety first and prevention first is always the theme of gas safety management.