A person who is engaged in or ready to engage in this profession.
2 reporting conditions
-Main (one of the following conditions)
(1) After formal primary training in this occupation, he has reached the required standard hours and obtained the graduation (completion) certificate.
(2) Engaged in this vocational training for more than 2 years.
(3) The professional apprenticeship expires.
-Intermediate (one of the following conditions)
(1) After obtaining the primary vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 3 years continuously, and has reached the required standard hours after the formal training of this occupation intermediate, and obtained the graduation (completion) certificate.
(two) after obtaining the primary vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 5 years.
(3) Obtain the vocational (professional) graduation certificate of the secondary vocational school with intermediate skills as the training goal, which is verified by the administrative department of labor security.
-Advanced (one of the following conditions)
(1) After obtaining the intermediate vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 3 years continuously, and has obtained the graduation (completion) certificate after reaching the required standard hours through the advanced formal training of this occupation.
(2) Having been engaged in this occupation for more than 6 years continuously after obtaining the intermediate vocational qualification certificate of this occupation.
(three) to obtain a vocational (professional) graduation certificate from a senior technical school or a higher vocational school with advanced skills as the training goal, and to be recognized by the administrative department of labor and social security.
(4) College graduates of this major or related majors have been engaged in this occupation for more than 2 years after obtaining the intermediate vocational qualification certificate.
-Technician (one of the following conditions)
(1) After obtaining the senior vocational qualification certificate of this profession, he has been engaged in this profession for more than 3 years continuously, and has been trained by this professional technician to reach the required standard hours, and has obtained the graduation (completion) certificate.
(2) Having been engaged in this occupation for more than 6 years continuously after obtaining the senior vocational qualification certificate of this occupation.
(3) Graduates of this occupation (major) and graduates of this major or related majors have been engaged in this occupation for more than 2 years after obtaining this occupation qualification certificate.
-Senior technician (meeting one of the following conditions)
(1) After obtaining the professional qualification certificate of the professional technician, he has been engaged in the professional work for more than 2 years continuously, and has been trained by the professional senior technician to reach the required standard hours, and has obtained the graduation (completion) certificate.
(2) After obtaining the professional qualification certificate of this professional technician, he has been engaged in this professional work for more than 4 years.
Three identification methods
It is divided into theoretical knowledge test and skill operation test. The theoretical knowledge test adopts the closed-book written test method, and the skill operation test adopts the on-site practical operation method. Both the theoretical knowledge test and the skill operation test adopt the 100 scoring system, and the score above 60 is qualified. The appraisal of technicians and senior technicians must be comprehensively reviewed.
4 the ratio of examiners and candidates
The ratio of examiners to candidates in the theoretical knowledge examination is 1: 20, and there are not less than 2 examiners in each standard classroom; In the skill operation assessment, the ratio of examiners to candidates is 1: 5, and there are not less than 3 examiners.
5 recognition time
The examination time of theoretical knowledge at all levels is120min; ; The assessment time of skill operation is: not less than 240 min for junior, not less than 300 min for intermediate, not less than 360 min for advanced, not less than 420 min for technician and not less than 420 min for senior technician; Thesis defense time is not less than 45 minutes.
6 Identification of field equipment
The theoretical knowledge test is conducted in the standard classroom; The skill operation examination shall be conducted on the job site, equipped with necessary boring machine, fixture, cutter, boring machine accessories and necessary measuring tools and instruments. [Edit this paragraph] Professional code (1) shall comply with laws, regulations and relevant provisions.
(2) Love your job and have a high sense of responsibility.
(3) Strictly implement work procedures, work specifications, process regulations, process discipline and safety operation regulations.
(4) serious and responsible work, unity and cooperation.
(5) Take good care of equipment and tools, fixtures, knives and measuring tools.
(6) Dress neatly and conform to regulations; Keep the working environment clean and tidy, and put the workpieces, tools and measuring tools in an orderly manner, and conduct civilized production. [Edit this paragraph] Basic knowledge 1 Basic theoretical knowledge
(1) knowledge of reading pictures.
(2) Tolerance and cooperation.
(3) Common metal materials and knowledge of heat treatment.
(4) Common sense of nonmetallic materials.
2 Basic knowledge of machining
(1) mechanical transmission knowledge.
(2) Knowledge of common machining equipment (classification and use).
(3) Metal cutting principle.
(4) Knowledge of cutters, cutter sharpening and grinding wheels.
(5) Processing technology of typical parts (spindle, box, gear, etc.). ).
(6) Understand the equipment lubrication and the use of cutting fluid.
(7) pneumatic and hydraulic knowledge.
(8) Knowledge of the use and maintenance of tools, fixtures and measuring tools.
3 Basic knowledge of fitter
(1) marking knowledge.
(2) Fitter's operating knowledge (chisel, file, saw, drill, hinge, tap, tap).
4 electrician knowledge
(1) Types and uses of common appliances for general equipment.
(2) Basic knowledge of electric drive and control principle.
(3) Knowledge of safe electricity use.
5 knowledge of safe and civilized production and environmental protection
(1) requirements for on-site civilized production.
(2) knowledge of safe operation and labor protection.
(3) Environmental protection knowledge.
6 Quality management knowledge
(1) enterprise quality policy.
(2) post quality requirements.
(3) post quality assurance measures and responsibilities.
7. Knowledge of relevant laws and regulations
(1) Related knowledge of labor law.
(2) Relevant knowledge of contract law. [Edit this paragraph] Operating instructions 1. Before working, check whether all the systems of the machine tool are safe and easy to use, whether the position of the handwheel crank is correct, and whether the fast feed can be realized. Limit stop should be installed correctly.
2. Every time you drive and start the moving parts, please pay attention to whether the cutter and handle are in the required position. When pulling the fast moving handle, you should start it gently first to see if the moving position and direction are consistent. It is forbidden to start the fast moving handle suddenly.
3. Before starting the machine, check whether the boring cutter is installed firmly, whether the workpiece is firm, the pressure plate must be stable, and the pad iron supporting the pressure plate should not be too high and there should not be too many blocks.
4. When installing the cutter, the fastening screws and pins are not allowed to protrude from the rotation radius of the boring bar.
5. When the machine tool is running, it is not allowed to measure the size, aim at the template or touch the machined surface by hand. When boring and reaming, it is not allowed to observe the cutting situation near the machining hole, and it is not difficult to take things by rotating the boring bar.
6. When using the self-made flat rotary cutter head for cutting, screw should be tightened, and it is forbidden to stand opposite or show it to him, so as to prevent the cutter head screw and oblique iron from being thrown out and hurting people, and special attention should be paid to prevent accidents caused by strangling clothes.
7. When the workbench starts to rotate automatically, the boring bar must be retracted, and no one is allowed to stand on the workbench. When two or more people operate the boring machine, they should be in close contact and cooperate with each other, and under the unified command of the main "operator".
8. At the end of the work, turn off the switch and pull back the machine handle.