Self-evaluation of mechanical maintenance workers' work performance (1)
Since I joined the work, I can continue to study the basic knowledge of theory seriously and pay attention to the combination with practice. Especially the six-year equipment maintenance work from 1998 to XX and the rapier equipment management work from XX to XX, which made me familiar with the working principle and performance of the equipment and mastered the maintenance skills, so as to better combine theoretical knowledge with practice and guide the production work.
Over the past year, under the leadership of the company, with the support and help of comrades, I have been learning all kinds of knowledge, summing up my work experience, strengthening my ideological cultivation, striving to improve my overall quality, strictly abiding by various rules and regulations, and fulfilling all the duties of my post. Here I want to make a brief summary of my work:
As an ordinary equipment maintainer, mechanical equipment is a solid foundation for enterprise production. Only when the equipment runs well can the continuous and stable industrial production be guaranteed. Modern enterprises should proceed from reality and always set up the tenet of "maintenance first, planned maintenance second and continuous technological innovation". On the basis of summing up one's own experience, combined with learning advanced foreign equipment management theories and methods, through the change of ideas, an equipment maintenance system that meets the reform requirements and suits one's own characteristics is created.
1. Abide by all rules and regulations, work hard and constantly improve your work efficiency. The professional ethics of love and dedication is the guarantee for the smooth development and ultimate success of every job. It is my own working principle to abide by the company's rules and regulations, do my job well, complete every task enthusiastically and earnestly, and perform my post responsibilities. Be diligent in thinking at work, constantly improve working methods and improve work efficiency. In fact, it is very important to think hard at work. While thinking about how to improve work efficiency, we can also learn more knowledge and master more skills.
2. Actively cooperate with leaders, unite colleagues and learn from each other. Carry forward the spirit of teamwork in the work, strive to complete various tasks in the workshop, respect leaders, obey orders and actively cooperate with the work; Care more about colleagues on weekdays, unite as one and learn from each other. When we communicate with each other at work, we often see our own shadows from others, both good and bad. In the face of problems, we become each other's backs and support each other side by side. Personally, I have benefited a lot from my work, from doing things to being a man; From looking at the problem to solving it, I realized new opportunities and experiences.
3. Strengthen the study of political theory and technical knowledge, and comprehensively improve their political and cultural quality and professional level. Daily cleaning, inspection, lubrication, fastening, adjustment, etc. The equipment shall be carried out according to the specified requirements, so as to ensure the normal operation of the equipment, and at the same time do a good job in daily maintenance, and insist on "three good, four good and five good" (. "Three good" means using, repairing and managing equipment well; "Four meetings" means that the equipment can be used, maintained, inspected and troubleshooting; "Five good" even if the equipment has good performance, good sealing, good lubrication, good adjustment and good firmness.
For a long time, I have always insisted on being strict with myself, working hard, always keeping in mind the company system, creating benefits for the company wholeheartedly, trying to practice the important ideas of the company and the workshop, and trying to do my job well in ordinary and ordinary jobs. In specific work, be an assistant to the leader, be a good poster for team members, "learn endlessly", continue to study hard in the face of various environments, make your technical level higher and develop faster, and try your best to make some modest efforts for the company, but this is not enough. Therefore, in the future work, in addition to strengthening the basic maintenance of workshop equipment, we need to further deepen technological innovation and transformation, so as to make greater contributions to the company's benefits.
Self-evaluation of mechanical maintenance workers' work performance (2)
Since I took up my post, I have constantly strengthened my self-cultivation, strived to improve my ideological and moral level, earnestly deepened the study of various cultures and professional knowledge, constantly explored new knowledge, made pioneering efforts, actively carried out various tasks within my intellectual scope, fully performed the duties of technical personnel, and played an exemplary role. Taking an active part in technical exchanges and scientific and technological innovation activities, Dida has done a good job of passing on, helping and leading, and fully completed various tasks and indicators assigned by superiors, which has played its due role in the company's production development. I will summarize my professional and technical work since I took office as follows:
First, consciously strengthen theoretical study and strive to improve personal quality.
Without a firm and true political direction, there will be no positive guiding ideology. In order to constantly improve my political and ideological quality, I have been paying close attention to national affairs and domestic and international situations in recent years, analyzing the impact of changes in the situation on enterprises, and putting this idea into practical actions in the production process to ensure that I am always consistent with the party and enterprises in thought and action. At the same time, I also bring this idea into my work and study, and constantly pursue my own progress. Some people say that if a person wants to become a talent, he must be a man first, which makes sense. In other words: if a person wants to succeed in his career, he must first learn how to be a man! Especially those who do our highly technical work, we should look at things attentively, concentrate on things and learn with an open mind. There is no room for carelessness and mistakes. First of all, we should have a correct working attitude, good professional quality, be serious and responsible for our work, obey the arrangement of leaders, listen to others' opinions and suggestions with an open mind, unite colleagues, be polite to others and serve warmly.
Second, correct working attitude and play a leading role.
Since I joined the company, I have been engaged in all mechanical and electrical affairs, including safety and quality supervision and inspection during all infrastructure construction. I am well aware of the importance of electromechanical management during construction, especially including most invisible electrical infrastructure and projects. It is necessary to supervise and inspect at any time. When you find a problem, you have to solve it. Otherwise, the future trouble will be endless and will never be eradicated. This is a test and responsibility for our electromechanical management. As the monitor of the electromechanical class, as an electrician, I am duty-bound to bear the responsibility and burden. So in my usual work, I not only ask my team members to be careful in supervision and inspection, but also know that it is necessary to be hard while the iron is hot. I made some strict demands on myself: first, I should walk in front of the workers when I encounter dirty, tired and dangerous work, and do more and more effectively than the workers; Second, when encountering technical difficulties, we should stand up and try our best to overcome them; I always insist on doing everything well and putting the interests of the company first. Including the production process after completion, sometimes dozens of electrical equipment failures, large and small, are handled against time, which has won valuable production time for the company, laid a solid foundation for the company's development, and provided a strong backing and strong guarantee for the company to create economic and social benefits. Third, I ask myself to take responsibility; I think since I am a technician, I should be better than ordinary workers in many aspects, such as business level. When the company assigns tasks, ordinary workers should take the initiative to undertake difficult tasks, and can't shirk their responsibilities with workers. They should shoulder the burden bravely like teachers. Usually, I not only ask myself this way, but also do it according to these requirements in practice. Therefore, my performance has been well received by the company's leaders and employees, played my due role as a technician, and established a good image of technicians.
Third, strengthen business study and improve technical level.
It is my motto to be too old to learn. Today, with the continuous development of science and technology, you will fall behind if you don't study for a day. Especially electrical automation, no one can fully grasp everything. It is constantly developing and updating, just like computer software, it is updated every day and has been developing. Maybe you knew it yesterday, but it will be different in two days, and more advanced things will be put in. So I usually read more professional books as long as I have time. Over the past year, I have collected a large number of new professional books and materials, constantly enriching myself and mastering new knowledge. For example, electrical design and drawing, electronic technology, modern frequency conversion technology, DC application in industry and so on. In the process of learning this knowledge, I learned a lot of new knowledge, such as the principle of plc programming control [FS:PAGE], the setting and control principle of abb inverter, and the control principle of high-power bidirectional thyristor of sipmos, which really benefited me a lot! Not only did I broaden my knowledge, but also greatly improved my technical level, which also made me interested in learning higher-level theoretical and technical knowledge.
Fourth, carry out skills exchange and realize socialized service.
In the usual work, I often have technical discussions and exchanges with other employees, share what I have learned with you, and learn what I don't know from others to achieve common progress. In addition, I am often invited to other units to help solve technical problems in my spare time. I have traveled thousands of kilometers, including Chongqing, Qinghai, Xiaogan, Enshi and Yichang, and I have been to five counties and three cities everywhere. This is inseparable from my spare time to learn high-voltage substation technology and secondary control technology. I fully combine theory with practice, constantly accumulate experience and constantly study new business, so that my skill level has reached the level of proficiency and ease of use. It is embodied in the following aspects: 1. I have mastered the design and installation technology of a series of high and low voltage power transformation and distribution projects of 35kv and below, and can undertake it independently. I have personally completed countless large and small power transformation and distribution projects. For example: 1. My previous work unit was in the famous Hongyang Group in Yichang. In her subsidiary, I was personally responsible for most of the high and low voltage power transformation and distribution projects with the capacity of 50kva to 1500kva. 2. In recent years, I worked part-time in a power equipment supporting factory and two transformer factories in Yichang to provide technical support and installation. I personally installed more than 100 box-type substations, various high and low voltage switchgear, and 100 industrial and mining electromechanical control cabinets.
To sum up, in the face of achievements, as a technician, we should not be narcissistic now, but continue to strengthen our study and learn from each other's strengths. Only in this way can I keep up with the pace of the times, make steady progress and better serve enterprises and society.
Self-evaluation of mechanical maintenance workers' work performance (3)
I left school in July of XX and worked as a mechanical technician after a simple internship in the company's equipment department. Mainly responsible for the management of some equipment on site. There are mainly electric single-beam cranes, gantry cranes, steam boilers, high-frequency vibrators and other large and small equipment on site. Although I majored in mechanical engineering at school, I still know very little about the mechanical equipment on site, so everything needs to be learned from scratch.
Field mechanical equipment plays an important role. The good operation of mechanical equipment not only directly affects the on-site production progress, but also has certain security risks for large-scale equipment, so the management of mechanical equipment is also very important. Let me, a girl who just graduated, feel the burden and pressure on my shoulders and the hard working environment, which once made me shrink back. In order to hone myself and learn more, I finally chose persistence.
My daily job is to go to the scene and check all the equipment to see if there are any faults and hidden dangers. If there is any fault, I will contact the on-site maintenance personnel by telephone and deal with it immediately to ensure the normal operation of the equipment in the shortest time. This seems to be a very easy job, but in fact it is not that simple, because whether the equipment is in good working condition closely affects production and even brings huge economic losses. Among many equipments, the electric single beam, gantry crane and steam boiler make me nervous every day. In order to reduce failures and find hidden dangers early, I inspect this large equipment every day, organize personnel to carry out regular lubrication and maintenance, conduct safety inspections every month, and make relevant records. With the help of colleagues and co-workers, I gradually became familiar with strangers from the beginning, and there were also many experienced old workers on the scene. My tight spin finally relaxed a little, but the field equipment often broke down, especially the electric single beam, which often derailed in operation, partly because of uneven track installation and partly because the operator was not focused when operating. According to the cause of the failure, the equipment was treated one by one, and the inspection and maintenance were strengthened. Later, the work was gradually carried out, and the faults of electrical single beam and other equipment were gradually reduced, which ensured the normal operation of field equipment.
The winter in the northeast came very early, so in June of 5438+00, I had to walk in the snow in the cold wind. Although the distance from the office to the production place was not far, I still didn't want to leave the warm office, but I had to go to the scene because of my responsibilities. I reluctantly walked to the scene wearing thick clothes and stepping on thick snow. I deeply remember that once the gantry crane derailed and slipped several meters due to the illegal operation of the workers, and the gantry crane steel frame was pulled out of the crack. Got a call from the gantry crane fault and rushed to the scene. When I arrived at the scene, I found that things were more serious than I expected, and I was at a loss and didn't know what to do. Fortunately, the repairman is experienced and calmly directs the on-site workers to be busy. I helped them get the tools they needed before and after running, and I was busy until late afternoon. Only when the gantry crane returned to normal did I finally breathe a sigh of relief. On my way to the office, I suddenly felt my feet hurt. It turns out that my feet have been standing in the snow for a long time and it hurts. At this time, my tears are disappointed. .........
Although this half year is very hard, it feels worthwhile. First of all, the flowers who have been living in the greenhouse have got some exercise, understood the hardships of life and honed my will to endure hardships. This is the first great wealth I gained after graduation, and it will also be another turning point in my life journey. Due to the climate, I took a three-month winter vacation and didn't start working until March of XX. I switched to work as an office worker in the equipment department, mainly responsible for collecting and sorting out the data of on-site mechanical equipment operation, sorting out the mechanical equipment account contract, etc. I don't have to stay in the office for long, but I'm still not used to it. I always felt that I didn't learn much in the office, and I was still very lost for a while, but I gradually got used to this life. Now I have a lot of free time after finishing my work in the office. You can learn other things you are interested in, and gradually like this lazy and free life. But last year's work training has been hidden in my heart, inspiring me to keep learning.
Time flies, everything last year is vivid, but it's been a year now. I have changed from an ignorant and fearless girl who just stepped out of school to a steady and practical girl. Looking back on the course of this year, there were ups and downs, crying and laughing, which seemed dull. In fact, it was also full of thorns, but it was also smooth sailing. This is just the beginning, there is still a long way to go, and there are still many unknowns waiting for me.
Articles on self-evaluation of mechanical maintenance workers' performance;
1. Work summary and self-evaluation of factory maintenance workers
2. Self-evaluation of mechanical engineers
3. Mechanical equipment maintenance worker resume model essay 3.
4. Personal evaluation of mechanical engineer
5. Mechanical maintenance work summary