Skills of making personal resume with ps
Material preparation:
1. A personal photo (of course it looks better! )
2. Material pictures of bamboo leaves. The author is going to make a cover with a green theme, believing that cool colors can make the boss look better.
I like it. The quality of the picture should be as high as possible. The following two pictures were taken by the author with a digital camera.
Creation tool: PS7.0/CS
1. Open PS and create a new blank document named "Cover psd". The width and height are 42 cm and 29.7 cm respectively, and the resolution is 300 pixels/inch. Mode is CMYK mode. Click the menu "View → Ruler" to bring up the ruler.
Click menu view → New Reference Line to open the Reference Line dialog box, select vertical as the direction, and enter 2 1 after the position.
A vertical blue reference line will appear in the center of the picture after confirmation, so that we can distinguish the front cover from the back cover.
PS Create Resume-Set Rectangle Properties
2. Select the Rectangle Tool to draw a rectangle with the width of 1cm on the right side of the reference line. The color is grayish green (RGB: 1 94,202, 193), the mode is dark (as shown in figure1), and the transparency is 90. Select "Brush Tool", select the "rectangle" with 18 pixel strokes, with a spacing of 240%, and draw a dotted line on the right side of the rectangle just drawn to set the color deeper. The color scheme of this work,
Mainly use similar colors, so that the overall feeling is more harmonious.
3. Open the bamboo leaf material and drag it into the cover. Psd ",and click the menu" Edit → Free Transform "to change the size and position of the bamboo leaf picture. "Free Transform" is a common tool in PS, and it is more convenient to use the shortcut key "CtrlT". build
The level of the picture is above the "bamboo leaves". Use the Text Tool to type the title and some text information. Under the text "Introduce yourself"
Draw a rectangular substrate with a rectangular tool. Finally, create a new layer, use the elliptical marquee tool to delimit a circular selection, click Edit → Stroke, set the width to 2 pixels, and set the color to light green, as shown in Figure 2 after the cover is completed.
PS Making Resume-Cover Rendering
4. Create a new file with width and height of 1 pixel and pixel respectively, and 5 "content" is transparent and "OK". Press Ctr to enlarge the picture view and draw a white rectangle at one third (as shown in Figure 3).
Select all pictures ("CtrlA") and click the menu "Edit → Define Pattern", and PS will use this picture as a filling sample.
Put in storage. Close the chart without saving.
Back to the cover. Psd "and create a new layer named" white stripe ". Use the rectangular marquee tool to the left of the guide.
Sketch a rectangular selection, click Edit → Fill, select the picture just defined as a filled sample, and click OK. The effect is shown in Figure 3. Changing the color of the lower layer can change the effect of stripe display, because stripe species are transparent except white.
PS: Make a rectangle at-1/3 of your resume.
5. Click on the blank space on the "Bamboo Leaves" layer with the magic wand tool, and then click "Select → Inverse Select" to get the shape of bamboo leaves.
Return the selection to the "white stripe" layer, click the menu "Select → Transform Selection", adjust the position and size of the selection, and press.
Delete the key points, and the rectangle with white stripes becomes hollow bamboo leaves. Finally, execute menu editing → conversion → water layer.
Put it flat "and turn it over. Add a gradient background from green to white under this layer, or add some geometric patterns. pen
The photographer put a small maze to add some interest. We can also do a better job of hollowing out bamboo leaves: add a vector diagram to this layer.
Give the mask layer (menu "Layer → Add layer mask → Show All"), and then fill the mask with gradient colors to make the bamboo leaves look more layered. The front cover and back cover effect is shown in Figure 4.
PS Making Resume-Cover and Back Cover renderings
PS Making Resume-Canvas Extends Down
6. Click the menu "Image → Canvas Size" to increase the height to 39.7 cm, and the positioning method is shown in Figure 5.
I won't go into details about the specific design. The final product is shown in Figure 6. After printing, use the art knife along the red line (when making
Cut, fold and stick with double-sided tape, and the cover of your profile is finished. After opening it, my photos and introduction are presented on the left, and copies of various certificates opened by 16 are displayed in the small bag on the right.
How to make a resume with ps is a very important step in job hunting. Do you know how to use ps to make a resume? Here's how to make it with ps.
biographical notes
I believe it will help you.
Steps to make a resume with ps
Create a new A4-sized screen with the following parameters:
Enter text:
Press the "T" key and use the text tool to enter all the resume text contents. The title font size is large, and the font size of resume content is generally 1 1. In fact, it depends on the amount of resume text, and the spacing should be adjusted to the appropriate size, as shown below:
Make a header:
Make a blue background for the "resume" header, and the foreground color can't be changed at will. In this paper, the sky-blue "rounded rectangle tool" is used to set the circular parameters, and a rounded corner with an appropriate size is dragged on the lower layer of the "Resume" text layer to replace the text with white, as shown below:
Make a detailed navigation bar:
According to the resume content, make the bottom line of every detail. The method is the same as above, except that the fillet parameter is set smaller. The effect diagram is shown below. After dragging out the fillet shape with appropriate size, press Crtl+T to transform freely, and enter "-10" after H in the box inclined to the right. The larger the value, the more inclined to the right. When finished, copy the blue shape as many as the detail category, as follows.
Process each text item:
Increase the font size of each item and highlight it. If necessary, you can also change the appropriate font. However, it is suggested that the visual recognition should be clear and formal, which is convenient for the interviewer to read. The effect is as follows:
Put an avatar photo:
Drag a suitable photo of my head, preferably smiling, and enlarge it to a suitable size, generally 2.5-3.5CM. Finally, move the photo to the upper right of the resume, but not higher than the header of the resume, as shown below:
Beautify the background:
Add a simple picture on the bottom layer.
Background picture
, which can be found at the following website
Baidu pictures
Search for suitable material pictures, pay attention to the neatness of the pictures and give priority to cool colors, and reduce the transparency of the layers according to the pictures without affecting the recognition of the words on the resume. Remember, your resume should focus on seeing the text clearly, as follows:
Adjust the spacing between words as a whole:
Align the text of each fine item title with the blue bottom bar up and down, and adjust the position of the bottom bar according to the text length of the fine strip title to match the text. The effect is as follows:
How to make resume cover with ps;
1. Enter the text, press the T key, and use the text tool to enter all the resume text contents. The font size of the title is large, and the font size of the resume content is 1 1, which actually depends on the number of resume texts. Adjust the line spacing to an appropriate size.
2. Make a header with a blue background on the resume header, set the circular parameters with the rounded rectangle tool, drag a rounded corner with a proper size on the lower layer of the resume text layer, and replace the text with white.
3. Deal with all the fine words, increase the font size of each fine word and highlight it, or change the appropriate font, with clear visual recognition and formal font, which is convenient for the interviewer to read.
4. Make my head photo suitable for me, smile and show it to others.