Your resume should be your first report about yourself before you go to work. The recruitment of human resources for a position in a large company usually receives hundreds of resumes a day. How to attract him to read your resume in the first three to five seconds and get his interview opportunity requires you to simplify your resume. It is most important to write a well-organized resume, and every item should be clear and clear. It is not that the thicker the resume, the better, but the simpler the better. Sometimes writing more is not skill, but writing less is the most important thing.
When you set foot on the job, the general company will require basic weekly work report, monthly work report, annual work report and so on, which begins the history of writing your work report. Maybe at this time, you still stay in the description of words and use a lot of adjectives. This is the most basic work report I want to talk about. Please check your content carefully and delete all adjectives. Immature or over-rendered reports will have a lot of adjectives. If you don't want your boss to think you are an unrealistic person, please delete those useless adjectives.
Writing a work report is actually the best communication opportunity between you and your boss. The author once experienced the leader of a department, because he insisted on writing a work report to the boss, he had better do the process of the deputy general manager of this company. Work report is not only to show the boss how much work you have done, but also a good opportunity for you to express your opinions and show your views on projects or things. valve
There are two kinds of work reports: active and passive. Proactive work report means that the boss can find questions and answers from this report after reading it, which is a report of excellent employees who are proactive and loved; The passive type simply states that it has finished the work assigned by the boss, and does not actively think about the problem, or puts forward the problem when it is found, but does not propose a solution.
Of course, the work report is not only for the boss, but also for the guests or partners. Everyone is different, but the basic points are as follows:
1. Physical authenticity of the contents of the work report: Before writing the work report, you must fully understand the cause and effect and all the contents of the work you report or summarize. If you don't know, please investigate or ask your colleagues. What bothers the boss or guests most is that there are wrong data in it, which will lead them to make wrong conclusions and judgments, and finally affect the progress of the whole project. Therefore, physical mistakes are absolutely not allowed to happen.
2. The work report does not contain personal opinions: in most cases, the work report tries to state a fact, and it is generally opposed to containing personal opinions when stating facts. We don't deny that the author's personal thoughts are right, but everyone's thoughts are one-sided, and you can't judge whether the people who read this report have the same thoughts or ideas as you, so please don't include your own thoughts in the work report. If you must express your thoughts, please indicate that this is your personal thoughts.
Conciseness is the principle of work report: this point has been mentioned above. The easiest way is to write a summary or title at the beginning of each paragraph, with clear paragraphs and clear views, so that readers can know the central idea of your whole report in five seconds. Neither the boss nor the guests will read your work report as patiently as they read romance novels. They care more about the results, so don't say how much effort you have spent to verify one thing, but spend the same effort to write down the whole process. I can tell you clearly that even if you write it down, readers will not sympathize with you. He just needs a result, which is what you should do.
4. There are solutions to problems: an excellent work report must have solutions to problems in addition to the theme and content. If you only tell the boss that there is a big hole ahead, but don't tell him how to deal with it, that's your problem. You might say that you can repair bridges, fill holes and so on. Depending on the boss's budget, I can't decide, then you are wrong. What you need to do is to write down the methods of filling the pit or repairing the bridge in the report, and it is best to attach their respective budgets, so that your boss will definitely add points to your work.
5. Necessary CC: This situation mostly appears in the project progress report ... >>
Question 2: How to write the project summary report XX project summary report XX unit management committee (the unit you want to report cannot be an individual): I was assigned by the leader to be responsible for XX project on XX, XX, XX. Over the past x months, with the strong support of leaders and the close cooperation of comrades, the project has progressed smoothly. This work was successfully completed on XX, XX, XX. Now the project construction is reported as follows: 1. Basic information of the project: This paragraph reviews the basis and significance of the project establishment. Second, the project under construction (it is best to give each subtitle a sensational name) Third, after the completion of each index, there should be specific data and a brief analysis to make a conclusion (this paragraph and second, the project under construction can also be interchanged. Be flexible). Fourth, there are shortcomings: (I am sentimental here, such as finding that I have insufficient knowledge accumulation. Fifth, some experience: Here you are loyal to the leader. In short, with the strong support of the leaders, the project has been successful, and your personal professional quality has also been improved in your work. The above are the works of the XX project. Please review. XXX (here is the name, company name and position can also be added in front) MM DD YY.
Question 3: How to write the progress report of the factory building project?
Question 4: How to write the project completion report? # # Self-evaluation Report on Pre-acceptance of Completion
I. Overview of the Project:
(1) project name: # # (construction permit number:, construction record number:, project quality supervision number:), the project is located with a building height of 99m. Among them, the 30 th floor above ground is a residential building, the # floor is a two-story frame structure with a construction area of O, and the underground floor is a basement garage and equipment room that combines peacetime and wartime.
Relevant units involved in the construction are as follows:
1, construction unit:
2, supervision unit:
3. Design unit:
4. Fine decoration design unit: (Please add fine decoration unit)
5, the construction unit:
6. Fine decoration subcontractor: (Please add fine decoration unit)
7. Investigation unit:
8, supervision unit:
Project start date.
Project completion date.
(2) Overview of engineering design:
1. The foundation of this project is immersed cast-in-place pile foundation (independently subcontracted by the owner and not included in the # # contract).
2. Superstructure system:
3, the upper concrete strength grade:
List of concrete strength grades
4. Design requirements for other parts and materials: Grade I steel (HRB235), Grade II steel (HRB335) and Grade III steel (HRB400) are used as the steel. All longitudinal steel bars of the main body are connected by straight thread above φ 16, and overlapped below φ 16.
Brick masonry: 190 thick clay porous brick is used for external wall, staircase wall and household wall, and 90 thick clay porous brick is used for internal partition wall and toilet partition wall, with the strength grade of MU 10, and M5 cement mortar is used for masonry.
Exterior wall: exterior wall paint, exterior wall imitation stone paint.
Doors and windows: aluminum alloy doors and windows,
Glass: LOW-E insulating glass;
Glass curtain wall: LOW-E insulating glass;
Ceiling: the ceiling of my unit has not been constructed yet, and it is reserved for secondary decoration.
Floor: Our unit only constructs the common part of stairs. The remaining floors and indoor kitchens and bathrooms are waterproof for secondary decoration.
Roofing practice (master roofing): foam concrete slope, 25 thick polyurethane insulation layer, 2 thick FAC elastic waterproof coating and 40 thick C20 reinforced concrete protective layer; Owner's roof: coarse sand cushion, non-slip floor tile surface.
Doors and windows:
Handrails: Balcony handrails are made of fluorocarbon sprayed aluminum alloy glass railings, and stairs are made of stainless steel handrails against the wall.
5, building electrical:
Power distribution: the power consumption of fire fighting equipment and civil air defense in this project is Grade I, and an 800W diesel generator is installed in the diesel generator room as emergency power supply.
Lightning protection: the lightning protection level of the electronic information system of this building is D-level. This building belongs to Class II lightning protection building. The lightning protection zone shall be laid with φ 12 galvanized round steel along the roof and surrounding parapets, and the grid shall not be greater than10x10m (12x8m). All metal components and exposed metal pipes on the roof are connected to the lightning protection network with φ 12 galvanized round steel, which highlights the metal decoration of the roof. The top edges of chimneys and other objects are provided with lightning protection belts. The main bars in the beams of all floors of the building should be connected with each other. The metal doors, windows and larger metal components of the external walls of buildings of 45m and above are all connected with lightning protection devices, and the top and bottom ends of vertically laid metal pipes and metal objects are connected with lightning protection devices. At least two main bars outside the constructional column are used as the down lead, and the main bars of the down lead are required to be welded according to the length and reliably connected with the lightning protection belt and grounding body to form a complete electrical channel. To the main reinforcement of the pile foundation, as the grounding body, the grounding device is welded into a closed loop around the periphery of the building. The main reinforcement of the ground beam is welded into a grounding grid.
TN-S system is adopted for the grounding of low-voltage system in this project, and the neutral point of transformer is directly connected with galvanized flat steel of grounding grid. The grounding electrode is shared with the lightning protection grounding layer, and the grounding resistance is not greater than 1ω. The general equipotential terminal box of this project is installed in the power distribution room, and all metal pipes, screw pipe and cables entering and leaving the building are connected with the equipotential terminal box.
6. Overview of water sanitation:
Domestic water supply: the water source of this project comes from municipal water supply pipes, and two DN200 water supply pipes are introduced from two municipal water supply networks as water supply sources. The water supply system is vertically divided into three areas: the lower area is from the first floor underground to the tenth floor above the ground, and the lower area is supplied with water by frequency conversion pump. The central area is from the ground floor 1 1 to the 20 floors above the ground, and the water is supplied by the frequency conversion pump in the central area. The high area is 2 1 floor to 30/floor above the ground, and the water is supplied downwards by the frequency conversion pump in the high area. There is a 65T domestic water tank and a 95T domestic water tank in the basement, equipped with three variable frequency domestic water pumps.
Drainage system: using rainwater and sewage ... >>
Question 5: How to report the project progress 1. Screening design companies: the most important thing is to look at the level, qualifications and works of the chief designer and design team.
Second, optimizing the design scheme is to communicate more, so that the designer can understand the design requirements of Party A, and Party A can understand the designer's design concept and compare it in many aspects.
Three, to control the quality, effect, cost and progress of the construction party, mainly rely on:
1, construction drawing depth control, reduce changes and visas in the process of engineering;
Question 6: Description of Construction Schedule How to write the description of the schedule, especially the "Remarks" content, I will provide a reference, and add or delete it according to the construction characteristics of your project.
Remarks: Based on the original plan, this plan has been adjusted according to * * * * * *.
1. During the construction period, if there are force majeure factors or pipeline relocation, greening (tree removal) transformation, waterfront cable approval procedures and construction conflict with this construction period, the construction period will be postponed.
2. This schedule serves as a reference before construction, and the completion time of the * * * construction schedule is determined according to the actual situation on site and the pile test, and the adjustment shall prevail.
In short, in the remarks column of the schedule, it should be clearly stated that the "natural disasters and man-made disasters" that may be encountered in this project will have an impact on the schedule. Leave a written document for the economic disputes caused by the lagging progress in the future!
Good luck!
Question 7: How to write the progress report of highway engineering needs a template. Thank you for issuing the first tender announcement (applicable to the project construction without prequalification). Supervision bidding announced that the preliminary design of the provincial (city, autonomous region)-to-highway project has been approved by (full name of the approving authority) with (document number), and the project construction unit is. This project has met the bidding conditions. Now, the project construction supervisor [[ 1]] is invited for public bidding. We sincerely invite qualified supervision units to participate in the bidding of this project. This project adopts the post-qualification review method. 1. Project overview and bidding scope The highway project subject to tender this time is kilometers long, and the technical standard is that the estimated investment of the project is RMB. The planned construction period of this project is: years to years, with the supervision service period of years. A first-class supervision organization is set up for this project. Set up the chief supervision engineer's office, the first chief supervision engineer's office is set up, and the second chief supervision engineer's office is set up ... The first supervision contract section is the supervision engineer's office, which is responsible for the first ~&nb.
Question 8: How to write the progress report of the National Natural Science Foundation? The project progress report 20 14 of the National Natural Science Foundation of China is filled in online by the "Islamic State" system and submitted directly, without paper materials.
In the progress report, "important research progress", "existing problems and solutions" and "other situations that need to be explained" can only be entered as text information. If you have pictures and forms, please upload them through the attachment. If there are no "existing problems and solutions" and "other situations that need to be explained", please fill in "None". Collect the papers published in this project by means of "online achievements", excluding the papers that will be published soon or not marked with the approval number of the National Natural Science Foundation of China.