1. What is an inspector?
1, the quality manager of the factory is QC, which is short for quality controller. Their work focuses on quality control in the production process.
2. Inspectors of foreign trade companies and third-party inspection companies are regarded as inspectors. Their work focuses on the final inspection and inspection before shipment.
3. The inspector's job is to check the product quality seriously, reflect the product quality objectively and fairly, and fill in the inspection report truthfully.
Second, the work content
1. Check whether the goods provided by suppliers meet the quality requirements stipulated by national laws and regulations or relevant national standards;
2. Avoid delivery delays and product defects in time, and take emergency and remedial measures at the first time;
3. Reduce or avoid consumer complaints, returns and loss of business reputation caused by receiving inferior products;
4. Reduce the risk of compensation and administrative punishment caused by selling inferior products;
5. Verify the quality and quantity of goods to avoid contract disputes;
6. Compare and select the best suppliers, and obtain relevant information and suggestions;
7. Reduce the high management fees and labor costs of product monitoring and testing.
Three. Type of inspection service
1. Pre-production inspection: The inspectors inspect the raw materials, primary processed products and parts produced by random sampling.
2. Inspection in the production process: Inspectors inspect the semi-finished products on the production line or the finished products just rolled off the production line, check the defects and deviations, report to the factory, and propose effective methods to correct the errors and deviations.
3. Sampling inspection of finished products before shipment: Before shipment (generally 100% production, 80% packaging), the inspector checks the quantity, technology, function, color, size, packaging and other details of the goods. The sampling method conforms to internationally recognized standards, such as ISO 2859/NFX 06-022/ANSI/ASQC Z1.4/BS 6001/DIN 40080. At the same time, follow the buyer's AQL sampling level.
4. Supervision of shipment: After sampling inspection of the final product before shipment, the inspector will assist the manufacturer to confirm whether the packaging used meets the proper cleanliness and packaging conditions in the factory base, warehouse or packaging transportation.
5. Factory evaluation: Inspectors assign factory inspectors to inspect the working conditions, production conditions, facilities, manufacturing equipment, manufacturing methods, quality assurance management and personnel of production enterprises according to the requirements of customers, and put forward corresponding explanations and opinions, which can not only investigate the problems that may cause quality accidents for customers, but also put forward rectification opinions.
Fourth, the preliminary work flow
1. Colleagues traveling on business should contact each other's factory by phone at least one day before departure to avoid the situation that there is no goods to check or the person in charge is absent after arriving at the factory.
2. Bring a camera, and make sure there is enough electricity, business cards, tape measure, hand knife, a small amount of sealed plastic bags (for installation) and other supplies.
3. Carefully read the Notice of Goods Falling (inspection data) and previous inspection reports, signatures and other related materials. If in doubt, it must be solved before inspection.
4. Colleagues on business trip must know the traffic routes and weather conditions before departure.
Verb (abbreviation for verb) arrives at the receiving factory or unit.
1. Call our colleagues to inform them that they have arrived at their destination.
2. Before the formal inspection, we must first understand the order, such as whether the whole batch of goods has been completed. If not, how much has been completed? How many finished products are packed? Is unfinished work being done? (If the actual quantity is different from the information notified by the billing colleague, it should be called back to the company first. If the goods are in production, we must also look at the production process, try to find out the problems in the production process, notify the factory and ask for improvement? When will the rest be completed? In addition, the finished products must be photographed, viewed and counted (the number of boxes/pallets can be counted). Please note that this information should be written in the remarks of the inspection report.
3. Take a picture with a camera and check whether the marks and numbers and packing conditions of the outer box are the same as the requirements of the unloading notice. If there is no packaging, ask whether the factory cartons are in place. If it has arrived (even if it has not been packed yet, you can check the shipping marks, size, quality, cleanliness and color of the carton first, but it is best for the factory to arrange to pack a carton for us to check first), if it has not arrived, you should know when it will arrive.
4. Weigh the goods (gross weight) and measure whether the size of the outer box is consistent with the printed delivery notice.
On the inspection report, you must fill in the specific packing information, such as how many pieces (pieces) are packed in an inner box (middle box) and how many pieces (pieces) are packed in an outer box. Please refer to the writing: 50 pieces/inner box, 300 pieces/outer box. In addition, is the carton packed with at least two straps? Remember that the outer box should be sealed up and down with H-shaped sealing tape.
6. After sending the report back to the company, all colleagues who are on a business trip for documentary or inspection must call the company to inform and confirm that they have received the report, and inform their colleagues when they plan to leave the factory.
7, according to the instructions for drop box test.
8. Check whether the outer box is damaged, whether the inner box (middle box) is a four-page box, and check that the compartment card of the inner box should be white or gray.
9. Check whether the product is damaged.
10. Spot check the goods according to the quantity description of the standard (generally AQL standard).
1 1. The situation of taking pictures of goods includes defective products and the situation on the production line.
12, check whether the goods meet the relevant requirements, such as product color, trademark color and location, size, appearance, product surface treatment effect (such as no scratches, stains, etc. ), product functions, etc. (Please pay special attention to (1) the effect of silk-screen printing of trademarks, without hyphenation or dragging. Test the silk screen printing with adhesive tape to see if it will fade. (b) The colored surface of the product shall not fade or fade easily.
13, check whether the color combination is damaged, whether there are creases and scratches, whether the printing effect is excellent and whether it is consistent with the proofing.
14, check whether the goods are made of new materials, the raw materials should be nontoxic, and the ink should be nontoxic.
15, check whether all parts of the goods are packed in place, and do not loosen or fall off easily.
16, check whether the goods function normally and operate normally.
17. Check whether the goods have been cut by the other party, and don't cut your hands with sharp edges.
18, check the cleanliness of goods and cartons (including packaging color, paper cards, plastic bags, stickers, bubble bags, instructions, foaming, etc.). ).
19, check whether the goods are in good condition and stored in good condition.
20. Take away the required number of bows on the spot according to the instructions on the alighting notice, and remember that representative defective products must also be taken away (very important).
2 1. After filling out the inspection report, tell the other party together with the defective products, and then ask the person in charge of the other party to sign and write the date.
22. If it is found that the goods are in poor condition (there is a high probability that they are unqualified) or the company informs them that they need to be turned over, then colleagues on business trips should immediately ask the factory about the arrangement of turning over the goods and when they can turn over the goods, and then reply to the company.
Sixth, the later work.
1. Download photos and send them to related colleagues, and add a simple solution to each photo in the email.
2. Arrange the samples and label them, and arrange to send them to the company on the same day or the next day.
3. Archive the original inspection report.
4. Colleagues on business trip should call their immediate superiors to explain their work if they can't come back to the company in time.
Remarks: The workflow of inspectors in third-party inspection companies is similar to that of foreign trade companies, but they check information more carefully and have stricter requirements for taking photos. Because they only get the information before the product is shipped and do the final shipment inspection, and often there is no sample control inspection.
Acting for inspection, factory inspection and cabinet supervision services all over the country.
Our team has the inspection experience of foreign trade companies, understands the inspection process of third parties (SGS, ITS, TUV, BV, Shenhua CTI, Beijing Puni), and is familiar with the inspection standards of hardware, plastics, electronics, wires, clothing, bicycle accessories and backpacks, security equipment, plastic products, etc. Inspection is carried out in accordance with international standards and customer standards, and undertakes inspection and cabinet supervision of various consumer products. I bring my own computer, digital camera, barcode scanner, thermometer, thickness gauge, plug gauge, multimeter and other measuring tools, and issue reports in both Chinese and English!
1, supplier evaluation:
Entrusted by customers, we make a professional overall evaluation of the factory according to the requirements of products: such as whether the equipment, fixtures, raw materials and documents needed to produce products are complete? Does it meet customer requirements? And whether the factory's previous quality control documents effectively control product quality. At this stage, we will provide customers with detailed information of the factory, such as important information such as production capacity \ quality control capacity.
2. Initial inspection (IPI):
When inspecting the goods in the factory, we should strictly follow our specifications and guidelines, check all the production materials, auxiliary materials and production methods, and confirm the sample verification with customers to ensure that the products produced are consistent with the samples! At this stage, we assure our customers that the product is consistent with the model and the production method is correct.
3.DPI: 4x6 l% ~ 1Y7 g/z
In the production process, our inspectors randomly take samples from semi-finished products or partially packaged finished products for inspection and detailed testing, so as to find and identify early problems in time, avoid causing a large number of defective products to continue production, and put forward effective improvement measures and feedback them to customers in time. At this stage, we will find problems as soon as possible and propose improvement plans to predict the production efficiency and completion time of customers.
4. Final inspection (Friday):
When all the products have been packaged or more than 80% of them have been packaged, our inspectors will take samples in strict accordance with the statistical sampling standard ANSI/ASQ C21.4cmil.STD-105e, check the packaging method and quantity of the products, and check the appearance, function and related tests of the products in detail to see if they meet the customer's requirements and confirm whether they are consistent with the model. At this stage, we will evaluate the whole batch of goods as a whole.
5. Factory inspection:
Whole process quality control? In order to prevent large orders and long-term orders from being affected by quality or delivery time, we will send QC to the factory for follow-up inspection, from the beginning of production, mid-term production to the final shipment. Our perfect service guarantees the quality and delivery time.
6. Goods subject to comprehensive inspection:
If the product price is high and the quality requirements are very strict, it will be fully inspected. Every product will be inspected by our inspector, and you will greatly reduce the risk.
7. Container loading:
Our inspector will check whether the container is in good condition, whether the goods and quantity, labels and packaging materials meet the requirements of the order, whether the products are damaged or insufficient during loading, etc. , to ensure compliance with customer requirements, and to take relevant photos on the spot as evidence.
About the inspection industry
About what? Inspection industry? -Must read for newcomers.
1. What is inspection service?
Inspection service is an activity of checking and accepting the supply quality and other related contents in the order and purchase and sale contracts on behalf of the entrusting party according to the requirements of the entrusting party. The purpose is to check whether the goods provided by the supplier meet the requirements of the order contract and other special requirements of the demanding party.
Inspection service has become an international practice, which can help the buyer to avoid delivery delay and product quality defects in time, and enable the buyer to take emergency and remedial measures at the first time, thus ensuring the interests of both buyers and sellers and ensuring that consumers can buy products with confidence. For example, in the 1990s, a foreign child accidentally swallowed the eyes of a doll, so the foreign inspection company that undertook the inspection of these toys paid hundreds of thousands of dollars, just because the inspectors missed the eye tension index at that time.
2. Check type:
There are three ways of inspection service: DUPRO, FPI and TRI:
DUPRO mode is a test in the production process. According to the agreement, when the product is 20% or 50% complete, the inspector will go to the manufacturer for sampling inspection to verify whether it meets the requirements of the order.
FPI method is the final product inspection. Inspectors go to factories, warehouses, docks, warehouses and other places according to orders or national standards or international practices to conduct on-site sampling inspection of finished batch products with package numbers. When necessary, they conduct sampling inspection on quality-related items to verify whether they meet the requirements of orders or relevant national standards. After examination and approval, they will issue an inspection report according to the inspection agreement, and if necessary, they can affix inspection marks on the inspected goods.
TRI mode is that inspectors inspect all products in a batch according to the inspection agreement.
3. Check type:
Check whether the goods provided by suppliers meet the quality requirements stipulated by national laws and regulations or relevant national standards;
Avoid delivery delays and product defects in time, and take emergency and remedial measures at the first time;
Reduce or avoid consumer complaints, returns and loss of business reputation caused by receiving inferior products;
Reduce the risk of compensation and administrative punishment caused by selling inferior products;
Verify the quality and quantity of goods to avoid contract disputes;
Compare and select the best suppliers, and get relevant information and suggestions;
Reduce the high management fees and labor costs of product monitoring and testing.
4. The basis of inspection:
Sampling process:
Inspectors conduct sampling inspection according to ISO 2859 standard. Qualified Quality Standard (AQL) will list the number of samples and the acceptable number of major and minor defects for each batch of products.
Inspection standard:
? amount
? external
? artificial
? function
? Packaging and marks and numbers
In addition, if the customer has special requirements, it will also be regarded as a test condition.
;