Wicker-(eyes) 1X 1 rib is also straight on the shirt, but it has no bead shape, so it is called wicker, and the arrangement of double-plate needles is the same as Siping; The control key is fully open, the left and right characters at the bottom are dense (high), and the left and right characters at the bottom are loose (low). The difference between willow bar codes (on the other side) depends on whether the lines are straight, whether the stitches are beveled and whether the stitches are close to the pattern. Because each stitch contains multiple stitches, the width of the shirt is very good and the production speed is slow. But the thickness, weight and fullness are beyond the reach of other institutions.
Beat the chicken-the arrangement of double-plate needles is the same as Siping, the rotation of 1 is the same as semi-flat, and the characters are appropriate. As before and after, it is more stable than three levels and four levels. Because the tension of fabric loops is commensurate and will not curl, it is especially suitable for sweaters that need to be strong, dense and stable.
Over-the-counter medicine (osmanthus fragrans), the machine needle of the machine board is made into several special needles, and the bottom needle is made into several special needles to achieve this effect. Stranded rope-also called braided flower, is divided into three twisted branches, six twisted branches and six twisted branches. , and the left and right sides of the twisted rope must have 1-2 bottom needles, so as to show the subjective feeling of the twisted rope. (also called twist) Here is an example, twist rope. You can put a few needles at the bottom of the twisted rope position to lengthen the coil. Needle shifting-needle retracting, which moves a single needle or multiple needles in the same tissue in multiple directions, can also be said to be a kind of needle retracting, but the practice is quite special, so it is listed. Multiple needles in the same tissue move as a whole.
Gubo-needle arrangement is the same as Siping. When weaving the valley position, turn off the two control keys at the bottom edge. The upper needle (single side) can be woven several more times and then connected with the bottom needle to form a bulging wavy and scroll pattern.
Single-sided-the single board is full of needles, the left and right triangle control keys are fully opened, and the characters are appropriate. One-sided fabric is woven by a row of needles, and the single-sided needles are in the same plane and side by side.
Siping —— Double-machine board is full of needles, four control keys are fully open, and the word code is appropriate. Siping is a double-sided fabric woven by two rows of oblique needle boards. The needles of both machine plates are operated, and each row of needles alternately pulls the needles according to their respective aspects. The appearance of the bottom and surface of the fabric is the same, and the fabric is elastic.
Tong Yuan —— The two boards are full of needles, and the control panel is left and right, with appropriate characters. Metasimilarity can be divided into general metasimilarity, open metasimilarity and open metasimilarity. The common method of meta-similarity is seamless. First, knit the surface board flat with thread, and then knit the bottom flat with the same number of rows on both sides.
Three levels-the two-machine board is full of needles, and the bottom of the control key is closed to the right, and the word code is appropriate. After the hem is combed and knitted, adjust the code (the main code is loose and the four-letter code is juxtaposed). The front of the fabric is an elongated row, and the back is two rows. It is precisely because the two backs are located on the front that the fabric is curled towards the surface, which makes the fabric more stable and stronger than the plain needle.
Pit bars-also called rib points 2X 1, 3X2, 4x3; 10x2, 4x 1, 6x 1, etc. The two boards are arranged with needles at specified intervals, and the control keys are fully opened with appropriate characters. There are two kinds of holes for picking flowers and spitting needles (the bottom is over the surface, or the bottom is divided into flowers). On the top comb, the flowers should be collected in waves, and the longitudinal lines on both sides are staggered to form a longitudinal pattern or groove effect.
1x 1 rib: English rib, woven by alternating single and vertical needles.
2x2 rib: Swiss rib, a series of two connected longitudinal coils on the front and two connected longitudinal coils on the back alternately arranged. Fabric structure has high elasticity and will not curl.
** 2 empty 1 row needles: rib needles (for teeth) are arranged on both sides of the machine plate, and are pressed by 2x2 rib woven by two working needles and 1 non-working needles in a circumferential arrangement.
** 2 Empty needles and 2 rows of needles: two machine plates are equipped with double rib needles (for needles), 2x2 ribs are arranged by pressing rings, and two working needles and two non-working needles are woven. One side of the needle arrangement is also acceptable. When weaving the grain position (single-sided ripple), put two control keys at the bottom edge, flatten the semi-specialty first, then close the two control keys at the bottom edge, and weave several more loops of needle (single-sided).
Pick and shout-that is, leave a vacancy in a certain part of the shirt, and then form a pattern by this vacancy. This paper introduces picking dog teeth. This is a classic practice of finding fault and shouting.
Intermittent colors-multiple colors alternate with each other.
Cam wool-divided into two layers, one color on the top and the other color on the bottom. Through the cam wool yarn mouth, the upper wool tightens the lower wool.
Beating-up-spinning or spinning it in the needle mouth, and then knitting it for half a turn to make it flat, this organization forms a beating-up (also known as tuck sewing), there are first-class and second-class patterns. The difference between first-class products and second-class products is mainly changed by arranging needles. Machine needles can be divided into high and low feet, long and short tongues, and needles can be arranged according to flower shapes. Common sesame flowers such as pineapple flower and sesame flower: half turn 1x 1 double reverse cross needle. Osmanthus fragrans: A special product of 65438.
Diffuse wave-every time the machine disk moves in the same direction, it will turn several times, and the organization formed is diffuse wave. Mainly used to comb the pit strips, commonly used is the Mao Mao spike (wicker+ripple) on the sweater.
Rest (thimble)-the working principle is that when the needle is not working, it will not eat the thread; In this way, in the process of knitting, the knitting needles at any position can be controlled to pause or resume the knitting state, so as to realize collar position, shoulder position, chest, lower bar, pocket, shirt foot, straight line and various patterns.
Hanging on Jacquard-The pattern of wool yarn (also called hanging wool) is put on the needle by hand every half turn, which is all tied by hand.
Stripping (Punching)-Punch the pattern on professional cardboard (there are 24 meshes and 28 meshes in the market at present), fix it on the cardboard machine, open the designated keyboard, and weave it with yarns of various colors (up to about 6 colors), (or regularly punch holes with a punching head). You can also punch holes in monochrome to form various flower shapes.