Yashili coating: the correct color matching method of latex paint
Latex paint sold in the market is mostly white and light, and the amount of dark paint is relatively small, which is mostly used in special parts or exterior walls. Usually, after the white paint is prepared, the paint with the required color can be prepared by itself, and the color paste with fineness lower than the finished paint can be purchased and prepared by itself.
The color matching steps of latex paint are as follows:
1. Analyze and find out the types of color paste needed to prepare color paint.
2, under the condition of stirring, slowly add the required color paste, after adding a color paste, fully stir, and then add the second, and sample and compare with the sample at any time. It should be reminded that the color difference between dry film and wet film of latex paint is large, and the dry film is darker than the wet film. Attention should be paid to the contrast under the same conditions to ensure the consistency of paint tone.
3. Color matching should be based on the principle of reversing the depth first, and then looking for the tone. For deep * * * pulp, excessive error in formula addition should be avoided.
Yashili coating: the correct color matching method of latex paint
4. The color paste is easy to precipitate, and it should be stirred evenly before color mixing and use, so as to avoid excessive error in formula dosage.
No matter how much color paint is used, it is best to put it in the same jar to avoid color difference. If it is difficult to mix a can, it should be mixed in stages first, then each batch should be mixed in the same proportion, and it can only be used after being evenly stirred to ensure uniform color.
The above is the correct color matching method of Yashili paint: latex paint, I hope it will help you. More detailed and professional home improvement information is under control, so stay tuned!