Introduction of plastic steel window
There is no doubt that plastic steel windows are the most common design in modern architecture. Because of its complex manufacturing process and long process, and in order to enhance the toughness and rigidity of this product, it needs to be filled with steel bars when necessary, so it is slightly more expensive than the same type of windows, but this does not seem to affect its sales. Plastic steel windows can be divided into ordinary doors and windows, sound insulation doors and windows and heat insulation doors and windows. Kaiping windows and sliding windows are often used in our daily lives, and projection windows may be used in the kitchen. As long as these windows are not huge, we can dismantle them ourselves as long as we master the demolition skills when they are broken.
Whether boys or girls want to learn how to disassemble the plastic-steel window, they should know the relevant knowledge of the plastic-steel window in advance, such as the material and usage, which will help us to understand the structure of the window more clearly and disassemble it easily.
Demolition skills of plastic steel window
First, push the two windows together to overlap, hold the window sash outside with both hands, lift it up hard, and then move the lower part of the window sash out of the window rail slightly. At this time, press down the sash, and the upper part of the sash will come out of the window frame. The inner sash can also be removed in this way, because the outer sash has been removed, which is more convenient to remove. Be sure to pay attention to safety when removing the window sash. In order to prevent getting rid of it, it is best for two people to cooperate.
But sometimes the window sash may not be lifted because the plastic strip on the side is limited. You can carefully observe the groove on the side of the sash. This plastic strip, also called anti-theft board, is glued on with plastic clips. You can gently pry it down along the gap with a screwdriver, and the window sash can be removed. Install the safety plate after completion.
If you encounter a window lock, you must open it.
In addition, there is a protruding object in the groove above the window frame, which may also block the removal of the window frame. This object is used as a limit, which can be fixed with screws or removed. But installed on the side, it should not touch.
Matters needing attention in dismantling plastic-steel windows
Do not use violence when removing the handle. Be careful to break the trunk of the handle in the hole, and the whole window will be finished.
Don't open and close the handle hard, because the trunk is written and wears away every time it turns.
Generally speaking, we don't recommend cleaning the windows ourselves. If conditions permit, it is recommended that you ask a professional to come to your home for cleaning or replacement. However, considering the uniqueness and weight of the plastic steel window, we should be careful at any step of disassembly. If the force is too large or the angle is incorrect, it is likely to break the glass and cause an accident.
How to change the glass of plastic steel window
First remove the broken glass: first remove the glass beads, two long beads, two short beads with a greasy knife or thin blade, and finally remove the double glass and clean up the debris. Be as careful as possible not to damage the contact surface of the sealing strip sandwiched in the middle. Just scrape, insert and cut with a greasy knife.
Replace the new glass: clean the new glass, and also clean the inside of the original glass, otherwise it will not be cleaned when installing. Clean the contact surface of the sealing strip, put away the glass, make sure there are no sundries and dust inside, and seal it with glass glue.
Reinstallation of glass: when the glass glue is 80% dry, put the double-layer glass back. On the contrary, put the short batten first, and then put the long batten. Then polish the glass and replace the plastic window glass.
It is best to handle the disassembly of doors and windows professionally. If we take over a house, the installation of these doors and windows, as well as floors, walls, indoor stairs, entrance doors, balconies and so on. Before handing over the house, it actually needs a comprehensive inspection. Tuba rabbit has free house inspection service. It conducts a comprehensive inspection of the new house through a professional third-party organization, and submits the problem before the house is delivered to the developer for rectification, so as to avoid the responsibility of the owner for the quality of the house after the house is closed in the later period and avoid unnecessary economic losses. Empty drum, peeling, water leakage, cracks and other housing quality problems are caught in the net, in strict accordance with industry standards and effective inspection results report. The above is about how to dismantle the plastic steel window, I hope it will help everyone!
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~