First, you need an ApplePencil.

Just like a tablet needs a digital pen, you need a special brush tool to draw on the iPad. I suggest you buy a regular brand here, and don't choose an unidentified brush for the sake of cheapness and convenience. Otherwise, there may be pressure and poor writing, and even some inferior brands may cause damage to the screen.

2. Selection of painting tools

Personally, fertility is the best, which is also the first choice of many professional painters. Although the price is relatively high (68 RMB), it has the most comprehensive functions without advertisements. Also supports homemade and imported brushes.

Third, master more shortcut keys.

Just as the computer drawing of graphics tablet needs to master several key shortcut keys, so does the drawing of iPad. Because there is no keyboard, we often need to rely on our fingers to express shortcut keys.

Take childbirth as an example. If you want to absorb color, you need to press the screen target with your finger. If you want to cancel this step, click two fingers on the screen. If you draw a straight line, click the starting point, pull it to the end position and hold it down. After a while, the curve will automatically straighten.

In short, there are actually many shortcut keys in the iPad, so you must use them more.

How to Draw on a Tablet PC How to Draw on a Tablet PC

How to learn board drawing based on zero? How does a tablet learn to draw? What should beginners pay attention to when sketching? Is it difficult to learn to draw? How can I learn to draw well? Presumably, these are questions that beginners often think about, but they just don't know how to learn how to draw well and then draw what they want to draw.

So today, the civet class collected some tutorials on how to learn printmaking, and the tablet can also learn to draw! Teach you how to learn the skills of sketching on IPAD from scratch. The tutorial is very simple. Let's take a quick look at the beep:

0 1 Draw a draft

————

I have two ways to draw a draft, and I will choose one according to my mood when drawing:

Method 1 Draw the approximate structure with "HBpencil" in "Drawing".

The second method uses the "studio pen" in "inking" to reduce the transparency of the brush and draw the approximate structure.

Even if the focus is on the draft, it can't be simpler. Don't draw the line several times like me. This is a bad habit.

02 stroke

Reduce the transparency of the draft layer, and then create a new layer on the draft layer and draw it with a brush.

(The light lines in the canvas are drafts with adjusted transparency. )

In the process of drawing, pay attention to the smoothness of the lines and try not to make the lines look wobbly (unless you are intentional).

Key lines should be smooth!

03 coloring

Before painting, you can hide or delete the draft layer to reduce interference.

Focus on the fast filling function; For each color, a new layer is created.

04 Guangying

Why should light and shadow (shadow highlights) be separated into columns?

Because of the _ fall case, the amaranth rice patellar phenol was punished, and the amaranth media was too smart to force you.

focus

Remember, don't just use gray and white as the colors of shadows and highlights.

Learn to choose the color of shadows or highlights according to the background color and environment color, which will be more vivid.

05 details

This step is not necessary, but if there is enough time, adding some small details can make the work more exquisite. What are the specific details?

Inside the object

For example, show the folds and details of clothes.

(add some lines to the sleeves to show wrinkles)

In fact, it's very simple: iPad Illustrator procreate software beginner 1 1 Q: Every time I collect information online, the most troublesome thing is that the information is scattered, or I can't find the answer, or some questions are asked but no one answers. In order to make it easier for everyone to learn illustrations with pro software, or to draw their own thoughts and feelings with illustrations, we have specially compiled a beginner's learning collection, hoping to help everyone. If you have any questions about reproductive software, please leave a message. Let's learn and make progress together ~ Usage: You can read the outline of the question first, and then jump to the questions and answers you want to know. The most basic article: 1, How to adjust the brush size and transparency? 2. How to change the size of the original canvas? 3. How to draw common lines and shapes quickly? 4. How to quickly complement colors? 5. How to make the color scheme look better? 6. How to choose and choose your favorite brush? 7. How to be familiar with practicing common gestures? Function: 8. How to make good use of clipping mask? 9. How to make good use of perspective function? Other articles: 10, how to record your own works? 1 1. How to learn to make beautiful gradient fonts? The size and transparency of the brush are in the toolbar on the left. Slide up and down to adjust the size and transparency. Different combinations of brushes and transparency have a certain influence on our composition. Proper control of thickness and depth will add icing on the cake. The common usage is to draw lines. Its process is like cultivating our mentality. The length and continuity of a line, the strength of turning and imagination are all related to one's state of mind and artistic attainments. The lines drawn by impatient people are intermittent, the lines drawn by hesitant people are drawn, and the pictures drawn by people with insufficient grasp ability are somewhat scattered, all of which are related to their ability and experience level and their mood when drawing. Using a good brush is also a process that needs long-term tempering. If you don't think the brush looks hard and need to increase the hardness, there are two ways to try. 1, select the hard brush. Brush-air brush decoration-hard brush. There are also shades of painting. With the increase of pen strength, the trace of the pen gradually becomes deeper. 2. Modify the opacity parameter of the pencil logo in the brush, open the software, create a new canvas and start painting. First, choose the canvas size to draw at first. If you want to draw a postcard for yourself, you need to know that its standard size is 148× 100MM and165×102 mm. If you want to draw a picture book for yourself, the common format size of children's picture books is 20 (about 200X225MM). For 1~3-year-old children's picture book readers, the format of 16 is more suitable, because children's attention and observation are poor. A picture book is 145X 1 10MM, which is equivalent to the size of an adult's palm, so it is a small picture in a pocket-sized picture book. The size can be determined according to your own needs. If you just want to draw casually, there are many options in the software. Click the+sign at the top right to select the size for creating a new canvas. If there is no suitable canvas, you can also define it yourself. Common sizes are also listed below for reference. Second, if you find that you need to replace a larger canvas in the middle of painting, how should you copy the existing picture? Simply put, how to change from big to small or from small to big? There is a function of copying canvas in the software, just find this function in the image-copy canvas and copy it to another artwork. Straight line: it will automatically form a straight line without stopping writing until the end point stops, and the direction of the line can be adjusted without lifting the pen. Wave line: Draw a curve first, and then modify and adjust it by selecting-bending-advanced network. If there is something inappropriate in the middle, you can erase it with an eraser and then copy and splice it. If you need thicker lines, set the brush to the maximum. There is one of the most convenient and quick drawing methods. Choose a brush to draw shapes at will. Don't leave the interface to Chang 'an nib. The words "Edit Shape" will automatically appear in the middle of the menu bar. Click Edit Shape, and many optional shapes will appear, which can be adjusted according to actual needs. This method can be used to draw squares, rectangles, circles, ellipses and polygons. Besides the shape of stick figures, we sometimes need three-dimensional patterns. Solid circles: If you want to draw many circles at once, it is faster to use a brush. Just use a brush, and there will be a chapter on making a brush. For example, you can use a single-line brush, or you can use other brushes without burrs. Adjust the brush parameters and click General-Size Limit-Maximum Semi-circle: Draw a circle first, then drag it to the edge of the canvas, and there will be automatic cropping function, and a semi-circle will be obtained soon. Square, rectangle, triangle: draw the shape by the first method, and then fill the color quickly. Love shape: first draw a solid circle, then click Select-Bend-Advanced Grid, and then adjust according to the points. If you need love more than once, save the picture and make a brush. Rounded rectangle: as above, draw a circle or square first, then click Select-Bend-Advanced Grid, and then adjust according to the points. The first step is to choose your favorite color (that is, the palette) from the dot on the upper right. Step two, press the dot with a long pen and don't leave the screen. Drag it to the position of the pattern you want to color. Note: 1. The fill pattern must be a closed area. 2. Don't leave the screen when dragging. Charging together: About color composition: The colors of the surrounding objects are all made up of red, yellow and blue. This is also the three primary colors we often say. This is the simplest color. How did you get the complicated colors? This is through their mixed colors. Simply put, red, orange, yellow, green, blue and purple can show the relationship between them. Red+yellow = orange, red+blue = purple, yellow+blue = green. This is the relationship between their synthetic colors. You can synthesize more colors according to your own imagination, and finally form a color wheel. About color mode: RGB mode Red, green and blue CMYK represent the four colors used in printing, C represents cyan, M represents magenta, Y represents yellow and K represents black. If the image is only displayed on the computer, use RGB mode, so that a wider color gamut can be obtained. If the image needs to be printed or printed, the CMYK mode must be used to ensure that the printed color is consistent with the design. When we want to start making a new image, we must first determine the color mode according to the actual use of the image to create a new file. Method 1: Draw lessons from the colors of excellent illustrations, extract the color wheel as shown in the figure, insert the picture, click the plus sign in the upper right corner to create a new color wheel, press the color you want to choose, and then click any small black box area in the color wheel. Choose more colors to form a special color wheel. Method 2: One, two and three principles of color matching is a process of mutual echo and harmony between different tones. If the colors in the color circle are close together, they will be comfortable, and if they are far away, they will have certain influence. In order to facilitate memory, it is summarized into three simple principles. Principle 1: Color is also its own unique emotion. Excellent color matching can play a role in rendering emotions. Warm colors such as red and orange convey warm, energetic and impulsive feelings, while cool colors such as blue and green give people a stable, rational and reliable feeling. Black and purple can create a mysterious atmosphere. Color matching needs to be selected according to different emotional needs. Principle 2: Know two colors. Here we need to know two colors: intermediate color and complementary color. According to the order of red, orange, yellow, green, blue and purple, the interval color is the middle color, red+yellow, orange+green, yellow+blue, green+purple and blue+red. According to the order of red, orange, yellow, green, blue and purple, complementary colors are the two colors in the middle. The complementary colors of red+green, orange+blue and yellow+purple can show a kind of strength, momentum and vitality, and have a strong visual impact, which is also very modern and fashionable. Properly used, the effect is very good, and improperly used, it will produce uncoordinated, implicit and unstable effects. Principle 3: Three colors are suitable. Japanese designers put forward the golden ratio of color matching, 70: 25: 5, in which 70% is the main color used in a large area, 25% is the auxiliary color and 5% is the decorative color. In general, it is suggested that there should be no more than three colors in the picture, and three refers to three tones, such as deep red and dark red, which can be regarded as one tone. The less color you use, the better. The fewer colors, the simpler the picture and the more mature the work will be. The fewer colors, the easier it is to control the picture, unless there are special circumstances, such as some holiday posters, which need a lively and energetic atmosphere. Multiple images of colors are very active. The more colors there are, the colors should be allocated in strict accordance with the color matching ratio, otherwise, the image will be chaotic and the aesthetic feeling will be insufficient. Generally speaking, light color gives people a light feeling, while dark color has a heavy feeling. If you want to give people visual comfort, you need to pay attention to the balance of light and heavy, and the distribution of light and dark colors in the picture should be as uniform as possible to avoid the "weightlessness" of the picture. Brush, brush tool. A treasure has a special brush for PS or Pro software, which can be purchased, tried and screened. The more brushes, the better. Even if there are more than 100 or 200 brushes, you will eventually find that there are only a few commonly used and easy-to-use brushes. Just use your favorite brush smoothly. Brushes can be made by yourself. For example, the way to make a round brush quickly is to make a single line brush, and other brushes without burrs can be used. Adjust the parameters of the brush and click General-Size Limit-Maximum Quantity to maximize the value. If you want to make brushes with other shapes, such as squares and hearts, the method is as follows: Take a square brush as an example, click the brush library, click the plus sign, select Shape-Shape Source-Insert Picture-Insert Picture-and then adjust the parameters in the normal place. You can try to adjust the edges on the canvas, and the size limit can be adjusted appropriately. Remember to give the brush a memorable name. After finding the right and favorite brush, you can start painting. The easiest way is to imitate beautiful and fancy English fonts, which makes it easier to have a sense of accomplishment. The reference figure is as follows: 1. Click with two fingers to cancel the current operation. If you press it, it will be cancelled in the gallery. Two fingers can freely rotate the picture, enlarge or reduce it to fit the current screen. Layers can be merged in the layer area. 2. Tap with three fingers to return to the current operation. 3. Slide three fingers left and right to clear the current layer picture. 3. Slide down three directions to display the copy and paste interface. 4. Tap with four fingers once to hide/display the software operation interface. The clipping mask is an object that can cover other drawings with its shape. By using the shape of the lower layer to limit the display state of the upper layer, the clip art effect is realized. In terms of effect, it is to cut the artwork into the shape of a mask. Very interesting masks can often produce some special effects. Cutting the mask can play the role of matting. Methods: Select layer mask, click the eraser tool to smear the place where the cutout is needed, and adjust the size of the eraser. Click Invert in the layer mask, and the image of the object to be cut will appear. There are many different reference lines in the perspective function. It can make our works look neat and beautiful as a whole. Helps align various elements and calibrate their positions. When it is necessary to limit the size of a certain part in the design, you can use the reference line as an aid, and then operate only on a specific area. It can be found in Settings-Canvas-Drawing Guide. The software itself has a screen recording function. Open the software, which can be found in Settings-Video. Click on the slow-motion recording, play it back in slow motion after recording, and finally export the slow-motion video, which will usually be saved in the photo album. Charging together: Apple has its own screen recording function, and then the control center can add the screen recording function. Press the Home button twice to make the record button light up, and then click to start recording. Making gradient fonts is very simple, and there are three methods for reference. Method 1: Choose your favorite brush and write the words you want to write on white paper. Slide the layer of this word to the right to make it transparent. Then choose the color directly and paint it on the words. The second method is to draw a large piece of white paper first and then create a new layer. Choose an eraser with brush properties to write words. The gradient color will be redrawn and it will follow the trajectory of the brush. Method 3: on the white paper, color it in blocks and use this area as the background. You don't need to create a new layer, just write with an eraser with a brush. It is difficult to write fancy English words, and so are modifiers. In addition to this website that can be converted into reference, we can also search some beautiful English pictures online to copy and learn. Stay tuned ~