Summary of Wen Yi Safety Test Fan
For serious implementation? Safety first, prevention first? Policy, carefully find out the hidden dangers and problems existing in safety production, do a good job in safety precautions and dangerous point control, strengthen on-site safety management, and ensure the smooth completion of safety objectives. The substation major of the Operation and Maintenance Department has seriously carried out the inspection activities of power safety production. In-depth implementation of the "Notice on Launching the Special Action to Prevent Personal Injury and Death Accidents in Northeast China"? Safety production management, standardization of field operation, safety of equipment and facilities, and fire prevention and avoidance of personnel? Requirements, carefully look for hidden dangers and problems in production safety, do not go through the motions and leave no dead ends. Insist? Check and rectify? In principle, if there are no conditions to solve it at the moment, formulate rectification plans and prevention and control measures, clarify responsibilities, implement them to people, and solve them within a time limit. Major safety hazards found shall be rectified immediately. The inspection work is summarized as follows:
A, combined with the team situation, set up an inspection team.
The substation major of the operation and maintenance department has set up a self-inspection team headed by the main person in charge, safety officers and team members. Combining the characteristics of power safety inspection and the actual work situation of the team, the content of power safety inspection of the team has been formulated, with full participation and responsibility to people. In order to unify the workers' thinking, put? Evaluation? Work should be organically combined with daily work, constantly lay a solid foundation for safety, actively mobilize every member, and use the morning meeting time to publicize the significance, purpose, matters needing attention, responsibilities and requirements of staff. To lay a good foundation for this safety inspection.
Two, combined with the actual, serious self-examination.
Under the leadership of the company, the team organizes the whole class to supplement and improve the safety management system and measures of the team. Team according to the inspection content, control inspection and evaluation, according to standards, norms and other relevant provisions, combined with the actual situation, analyze and find hidden dangers and weak links in the work, record the existing problems item by item, truly expose the actual problems, and adhere to the practice of rectification while inspection.
Third, the main work completed:
1, organize to learn and deepen the rules and regulations of safety in production. The Operation and Maintenance Department regularly organizes the study of various rules and regulations related to power production, so that all employees of the Operation and Maintenance Department can always keep in mind the rules and regulations and post responsibilities, and at the same time enhance the enthusiasm and sense of responsibility of the cadres and workers of the Operation and Maintenance Department for safety work.
2. Strictly implement the safety meeting system and inspection system. The substation specialty of the Operation and Maintenance Department has always been pragmatic and solid, organized, planned, arranged, inspected and rectified, and adhered to the requirements of the safety evaluation manual. Self-examination and self-correction 、? Check and change? 、? Strict investigation and strict reform? The principle, I fully combined with the "safety regulations"? Check thoughts, leaders, management, rules and regulations, and hidden dangers? Five investigation activities are the main contents. At the same time, strictly enforce the weekly? Weekly safety meeting? And the regular meeting system of the safety supervision department, focusing on checking the implementation and existing problems of safety, quality and progress arranged last week, and arranging the safety, quality and progress work next week. The long-term persistence of this work has effectively ensured the hidden development of the safety work of the substation professional operation and maintenance station of the operation and maintenance department.
3. Strictly implement the system of investigation and rectification of hidden dangers of production safety accidents, and eliminate hidden dangers in time. Our company insists on a safety inspection at the end of each month to investigate the safety situation and hidden dangers this month. Seven? Check the inspection requirements, management system, management ideas, safety facilities, safety protection, use of machinery and equipment, labor protection articles, certificates, accident treatment, etc., without leaving any dead ends. Contact relevant departments in time to rectify the hidden dangers found. By this month, the rectification rate of hidden dangers has reached 100%. It has effectively promoted the all-round development of safety work and provided a good on-site environment for the stable development of the company's safety production.
4. implementation? Flood control in rainy season? Work measures, are you doing well? Flood control in rainy season? Work. According to the development of Xing 'an Power Supply Company? Flood control in rainy season? Notice of job requirements, the operation and maintenance department was established? Flood control in rainy season? The working leading group cleaned the drainage ditches in the production, living and office areas within its jurisdiction, comprehensively inspected and maintained flood control and drainage, lightning protection and grounding, and paid more attention to weather forecasting. Flood control and summer vacation? Provided a guarantee.
5. Seriously organize the implementation? Safe production for one hundred days? And then what? Safe production month? Activities. In order to carry out activities in a solid and effective way, the Operation and Maintenance Department set up an activity group with the main leaders as the team leader, the person in charge of the operation and maintenance station and the personnel on duty at the operation and maintenance station as members, strengthened the organization and leadership of the activities, and made careful arrangements and arrangements for the activities.
Four. Rectification:
Combined with the requirements of power production safety inspection, the team combined with daily work, checked and evaluated, and rectified, and completed the work as follows:
1. Carefully analyze the problems found, clarify the responsible personnel, and formulate corresponding rectification measures and plans.
2. Strengthen the study of safety responsibilities at all levels, urge employees to strengthen mutual supervision and care about work safety.
3 to further improve the quality of safety activities, combined with daily work to carry out a variety of safety knowledge learning activities. Actively guide employees to participate in discussion and study, and improve safety records according to relevant requirements.
4. Improve the internal assessment method of the team and increase the intensity of the habitual violation assessment.
5. Implement the system, hold the after-work meeting on time, and analyze and summarize the work of the day.
After careful item-by-item self-examination and evaluation, comprehensive rectification was carried out in time as planned, all kinds of hidden dangers were revealed, the safety status of the team was fully understood, the systematization and standardization of safety management were deepened, and the concept that nothing happened in the past was safe was changed. It is necessary to predict ahead, master the development trend of control and improve the safety management level of the team. Through this work to eliminate potential safety hazards, we will strictly follow the basic laws of power production and make serious efforts according to the requirements of our superiors, so as to lay a solid foundation for realizing the safety objectives of the operation and maintenance department this year.
Summary of Wen Er Safety Test Fan
After receiving the notice from the owner and the supervision company about the spring flood control safety inspection in 20XX, our project department immediately set up a leading group for the spring inspection, with the project manager as the team leader and the deputy project manager as the deputy team leader, and the heads, members and team leaders of the engineering department, the safety supervision department, ministry of materials and equipment, the technical and economic department and the office as the leading institutions to supervise, implement and carry out the specific work of the inspection. On May 3rd, Liu Yuchang, Minister of Safety Supervision Department, organized a comprehensive inspection of the organization and management organization, supervision system, responsibility system for production safety, implementation of various management rules and regulations, three-level safety education, certificates for special types of work, physical examination of operators and improvement of safety technical disclosure. On May 4th, project manager Pei Qinglin led the team. The relevant person in charge and team leader of the project department attended the comprehensive inspection of aerial work, large scaffolding, mechanical equipment, temporary electricity consumption, fire safety, perfect safety facilities, road traffic, regional isolation, civilized construction, visual image and warning signs on the construction site, and thoroughly rectified the problems found on May 7. The specific inspection results are summarized as follows:
First, the implementation of the responsibility system for production safety
The project manager is the first person in charge of production safety, who is fully responsible for the work of production safety, personally takes overall responsibility, organizes regular production safety analysis meetings every month, studies and formulates control measures, and timely solves the key and difficult problems existing in the work; The deputy project manager and the chief project engineer bear specific responsibilities, and are responsible for implementing policies, laws, regulations and notification requirements related to production safety, implementing relevant meeting resolutions, the spirit of instructions from superior leaders and safety technical control measures, guiding and coordinating the supervision and management of production safety on the construction site, and organizing emergency rescue drills for production safety accidents; The person in charge of each department is specifically responsible for the work of safety in production within the scope of his charge, and supports and cooperates with the person in charge of safety in production to do the work of safety in production within the scope of his charge. Strictly implement the responsibility of production safety supervision, strengthen the responsibility system for production safety of the main person in charge, take the implementation of production safety supervision and management as the key content of my project assessment, and establish and improve the assessment system and assessment index system for production safety.
Before the project starts, the project manager and the general manager of the company sign the responsibility book of safety production objectives; Before the start of each unit's project, each construction team shall sign a safety production target responsibility letter, totaling 7 copies, strictly binding the rights and obligations of both parties in safety production, and urging both parties to implement relevant safety production laws, regulations and related requirements.
Strengthen on-site supervision and inspection, strengthen the pre-shift safety education system, and put an end to? Homework 3 is illegal? Control the occurrence of safety accidents from the source.
Second, the production safety education and training situation
My project department strictly implements the three-level safety education system and conducts physical examinations for all aerial workers. Up to now, there are 420 person-times of three-level safety education and training, and 330 people have participated in physical examination. There are 420 qualified educators and trainers and 330 qualified aerial workers. Before the commencement of each subdivisional work, safety technical disclosure shall be made to all construction personnel, and safety technical disclosure shall be made in a timely manner in combination with the construction progress every month, with 87 batches of safety technical disclosure. Strengthen pre-shift safety education, and each team shall be educated by the team safety officer before taking up their posts, and do a good job? Three checks, three checks? Work, and to conduct a comprehensive inspection of various safety facilities before construction, safety education before shift1more than 600 batches. Special training and management were conducted for special posts, types of work and operators, and certificates were strictly unified.
Third, the operation of large mechanical equipment
The horizontal transportation machinery, lifting machinery (construction elevator, electric lifting cage), woodworking machinery and steel bar processing machinery used in cooling towers, chimneys, prefabricated component factories, steel bar processing plants and mixing stations have stable structures, and the four systems are running well, with complete and reliable safety accessories, sensitive and effective early warning devices and clear and complete monitoring systems. Working with illness? Phenomenon; The operator has passed the physical examination and the actual operation skills meet the requirements. 14 All operators hold relevant certificates, and the certificates are complete and valid; All mechanical operation and maintenance records are complete, accurate and tidy, totaling more than 265,438+000 copies, which fully reflects the operation of mechanical equipment.
Third, build large scaffolding.
The total height of scaffolding for wall construction of cooling tower is140m, and its verticality, flatness, bracing, fastening degree of fasteners, flat net in the frame, cable wind rope, wall accessories, operating platform, maintenance railing, and sundries cleaning of the frame meet the requirements of relevant technical specifications. This scaffold is put up for construction, and each operating platform has been inspected by quality inspectors and technicians. Only after passing the inspection can the next working procedure be carried out.
Four, temporary electricity and lightning protection grounding
After inspection, does the temporary electricity consumption on site meet the requirements? Three-wire five-wire system? 、? Three-level distribution and two-level protection? 、? One machine, one brake, one box and one leak? Requirements, line embedding, cable identification, switchboard setting, leakage sensitivity, grounding zero, switch box configuration and other standards, specifications, inspections, all power-consuming areas and switchboards are inspected by professionals every day, and inspection records are kept; The comprehensive situation of temporary electricity consumption meets the requirements of technical specifications.
Chimneys and cooling towers are high-rise buildings. In the construction process, we attach great importance to their lightning protection and grounding work, and combine temporary lightning protection devices with permanent lightning protection devices to ensure the effective connection of lightning protection wires. We regard this operation as an important process, which is included in the three-level acceptance scope, and regularly test the lightning protection grounding resistance to ensure that it is not greater than 10? . We conducted a major inspection on the grounding of large machinery, woodworking machinery, steel processing machinery, distribution boards, etc. , and replaced the lightning protection grounding at 12. At present, all mechanical equipment grounding devices meet the requirements of technical specifications.
Five, fire safety inspection
Focus on checking the types, quantity, status, availability and placement of fire-fighting equipment in cooling tower ram construction operation platform, chimney barrel construction electric lifting platform, material warehouse, living quarters and other areas. A total of 45 dry powder fire extinguishers are equipped on site to meet the needs of the site; And replace and check it regularly to ensure that it is in good use.
Perfection of the safety facilities of intransitive verbs
The key points are inner and outer pocket nets, inner and outer flat nets, operating platforms, maintenance railings, protective passages, backboards, and closed nets. In the construction of cooling tower and chimney wall, the focus is on the supervision and management of the sealing and maintenance of site boundaries, holes and aerial work surfaces; 200 safety nets were added, 260 meters of temporary maintenance railings, 80 meters of overhead maintenance railings/kloc-0, 80 pieces of hanging backboards were replaced, and the protective passage 120 meters created good conditions for the smooth construction on site.
Seven, regional isolation, visual image, warning signs
According to the unified deployment of the owner and the supervision unit, our project department has set up standard maintenance railings in the production area of cooling towers, chimneys and prefabricated components, totaling 360 meters, effectively completing the regional isolation and adding new highlights to the civilized construction on site. We hang propaganda banners, billboards and warning signs at eye-catching positions such as the side of the inspection railing, the inside of the protective passage, the workers' lounge, the sides of the road, adjacent holes, the operation room and the aerial work platform, which give visual impact to the workers on site and make the alarm bell ring.
Eight, improve the emergency plan and strengthen emergency management.
We carried out a special fire emergency drill, and the Minister of Safety Supervision presided over the drill, explaining the essentials and skills of using fire-fighting equipment. Through this activity, we achieved the predetermined goals of raising fire awareness, correctly constructing fire-fighting equipment, how to put out the fire, how to control the fire, how to rescue the wounded, how to escape and call the police, and made improvements in view of the shortcomings of the drill plan.
All the members of our project department, together with some members of the construction team, conducted an emergency drill to prevent the mountain from collapsing, so that everyone can understand that when the mountain collapses? How to evacuate quickly, how to rescue the wounded, how to control the situation and how to call the police? And so on, achieved the expected purpose of the exercise.
In order to carry out this spring inspection and make the activities achieve positive and effective results, my project department leaders, security personnel, engineering department managers, and heads of various construction areas, etc. Three violations? Phenomenon, eliminate and stop in time, and seriously implement and treat the rectification work of hidden dangers to ensure the normal development of this activity. In the future work, we will adhere to the combination of daily inspection, weekly safety inspection, monthly safety inspection, special inspection, seasonal inspection and holiday inspection, and bring all activities in the process of safety production into our supervision scope in an all-round and high-standard way to avoid management blind spots and eliminate management loopholes. All members of our project department will take this inspection as an opportunity to improve management methods, promote safety management in a down-to-earth and effective manner, and prevent the repeated and rebound of illegal behaviors and dangerous point sources; We deeply realize that achievements and honors can only belong to the past, and only by continuing to work hard and pay constantly can we do a good job in the follow-up projects? Safety, health and environmental management? The only way to work!
Summary of safety electricity inspection
According to the regulations on the management of fire safety electricity consumption and the instructions of superiors, combined with the construction characteristics of the company, the company conducted hidden dangers investigation and rectification on key parts of the company, such as office area, material stacking area and employee dormitory, which are summarized as follows:
The company handled the energy use permit for non-production workshop in time, inspected the cables used in the company's office area and dormitory, and replaced the found aging lines in time. Some sockets were ignited and melted due to poor contact, and the relevant personnel of the unit were required to rectify within a time limit. There was no pandering in the dormitory, but when it was found that some employees did not completely cut off contact after going out, the company informed them and arranged a special person to be responsible.
According to the construction characteristics of our company, small tools are frequently used. According to the requirements of Technical Specification for Electricity Use on Construction Site, our company conducted a clear and detailed education on safe electricity use for employees by means of opening a class meeting on Monday and publicizing before class, and asked the electricity users to learn and master the knowledge and operating procedures of safe electricity use. Electricians on the construction site must be trained and approved by their superiors, resolutely stop the phenomenon of illegal use of electricity and personal unauthorized connection of electricity, conduct regular safety inspection and supervision and management of electricity consumption in their own units, and rectify in time when hidden dangers are found.
Conduct a comprehensive inspection on the connection of distribution box, leakage protector and protection zero line of each equipment. Due to the cold weather in winter, all kinds of cables are easy to be damaged. Welding machines and hand-held power tools used by the company have accelerated the aging of the lines due to frequent movement. Timely package damaged parts found in inspection. For lines that do not meet the requirements,
Replace the road, and arrange regular inspection by the operator and self-inspection by the machine user.
Fire prevention: The unit posted warning signs prohibiting smoking and fireworks in the material storage area, classified articles according to the fire prevention regulations and placed fire extinguishers. No problems were found in the fire-fighting facilities during the inspection, but the workers smoked, which has been rectified, and the company has set up a lounge and smoking point.
I guess you like it.
1.20 17 spring safety inspection summary
2. Campus safety inspection work summary model essay
3. Safety summary of power plant safety personnel
4. Summary of electric power safety production work
5. Summary of safety production in power plants
6.20 17 Latest Monthly Safety Inspection Summary
7. Village-level production safety inspection summary