Report original research results. Require complete and reliable data and clear conclusions. Generally, the full text does not exceed 8000 words and the length does not exceed 4 pages (including charts and references). The rest are the same as "1. 1". 5. Important findings and experiences of applied research reports. Generally, the length is no more than 2 pages (about 4000 words). There is no Chinese and English abstract. The rest are the same as "1. 1". The article format 1 title generally does not exceed 20 Chinese characters, and the title should be concise and eye-catching and accurately reflect the theme of the paper. Try not to use abbreviations. The author should meet the following conditions: ① the personnel involved in the design of the topic or the analysis and interpretation of the data. (2) Drafting or revising key theories or other main contents in the paper. (3) Revise and check the editorial department's revised opinions, reply in academic circles, and finally agree with the publisher of this article. Any author who signs a paper should sign and authorize its publication. Other contributors to this study can be included in the acknowledgment section. If the author works in different units, the mark 1, 2, 3 ... is in the upper right corner of the author's name. The authors are separated by commas. 3. The unit with the first signature should be the unit to which the intellectual property reported in the manuscript belongs. If more than one unit participates in the research, the units should be marked in the upper right corner of the author's name by 1, 2 and 3 respectively. 4 City and Postal Code 5 Fund Project If the paper is funded by a fund project, please indicate the name and number of the fund project in the lower corner of the first page of the article. 6 The author of the newsletter should be determined when submitting the manuscript. Unless otherwise specified in the manuscript, the first author shall be regarded as the correspondent. When the first author and correspondent are not the same person, a footnote should be attached to the first page of the paper, including the correspondent's name, gender, date of birth, degree, professional title, research direction, number of published papers and contact information (fixed telephone number, e-mail). 7 Chinese abstract (about 400 words) This journal always adopts four levels of structural abstract, the specific levels are: purpose, method, result and conclusion. Specific requirements: ① Purpose: It should be consistent with the preface of the text and echo the conclusion. Methods: It should include the name of the main methods used in this paper, the number of cases (animals) and the necessary grouping. Results: The main results, data and statistical significance related to the research should be listed and verified by words. Conclusion: It is necessary to respond to the research purpose. 8 keywords keywords use the words listed in the medical index. If there are no corresponding words in the table, the processing methods are as follows: ① You can choose several directly related subject words to combine. ② You can choose the most direct upper subject words according to the tree structure table. (3) When necessary, you can use the usual free words at the end. 9 "China Library Classification" Please check the "China Library Classification Number". Content of papers classified by subject from China Library Classification. 10 English title is consistent with Chinese title. 1 1 Pinyin of the author's name, with all surnames capitalized and the first letter capitalized (as in SHI studies and history). 13 The English translation name, city and postcode of the author's company (which should correspond to Chinese) 14 The English abstract is consistent with the Chinese abstract. The English keywords of 15 adopt the words listed in the MeSH of Index Medicus. 16 text 17 thank you. You can use short words to express your gratitude to the collaborators who participated in a certain work, the assistants who were entrusted to carry out a certain work, and the people who gave guidance and funding. In principle, the applicant can only nominate thanks with the consent of the thanked person. The content of thanks is placed in brackets after the text and before the references. The references of 18 must be limited to the main documents read by the author in recent years (preferably within five years), and the text should be marked with corner codes (with Arabic numerals and square brackets). Internal publications, conference proceedings and materials to be published without obtaining the number of domestic unified journals (volumes) shall not be cited as documents.
This journal adopts the "sequential coding system" description method, and the order in which the papers appear is sorted by Arabic numerals. The writing format of common references is as follows:
Journals: [serial number] Authors [Note: Authors 1-3 are all listed, separated by commas, and only the first three digits are written for more than three digits, followed by "etc." Or "et al"; In foreign languages, the author's surname comes first (all capital letters) and then (abbreviation, no abbreviation)]. Thesis title [J]. Publication name, year, volume (issue): starting page number.
Example:
[1] Wang Yisheng, Han Feng, Cao, et al. In vitro culture and biological characteristics of goat bone marrow mesenchymal stem cells [J]. Journal of Zhengzhou University: Medical Edition, 20 10/0,45 (2): 266
Shi, Kou Xinxin. Detection of CA 125 in ovarian epithelial tumor tissues and patients' serum [J]. Journal of Zhengzhou University: Medical Edition, 2008,43 (2): 324
Tanasescu M, Cho E, Manson JE, et al. Dietary fat and cholesterol and the risk of cardiovascular diseases in women with type 2 diabetes [J]. American Journal of Clinical Nutrition, 2004,79 (6): 999
Merrington J, James M, Bradley M. Convenient reagents for the combined synthesis of loaded diazonium salts and azo dyes [J]. Chemical Communication, 2002(2): 140
Monograph: [serial number] author. Title [M]. Place of publication: publishing house, year: start and end pages or author. Chapter title [M]// author. Title: Publishing House, Year: Start Page Number.
Example:
Fang Ya. Sample size estimation and statistical analysis of sampling survey [M]// Fang Jigan. Health statistics. Sixth edition. Beijing: People's Health Publishing House, 2008:308.
[2] Zhang Ding, Zhu Baoyu, Zhang Shufang, et al. Study on dietary nutrition and health status of residents in Henan Province [M]. Zhengzhou: Zhengzhou University Press, 2007.
3 Chart processing 1 line chart The thickness ratio of the main and auxiliary lines of the line chart is 2: 1, and the vertical and horizontal coordinate ratio is 5: 7. Horizontal and vertical titles should be concise and to the point, and must be marked with international quantity and unit symbols. The symbols and abbreviations of quantities and units in coordinates should be consistent with the text. Please choose a black-and-white or color photo (3 million pixels, JPG format) with clear images, distinct layers and good contrast. Microscopic photos should indicate the dyeing method and magnification. It is recommended to select the position to be displayed in the tissue slice photo and place it in the center of the photo or mark it with an arrow. For identifiable patient photos, the author should be responsible for obtaining the patient's consent and making technical treatment to make them difficult to identify. The size of a single picture is suggested to be 5 cm×3.5 cm (width× height). 3. Table table design should be three rows of tables, arranged together with the text. Tables should be "self-explanatory" and have concise and accurate Chinese table titles. Drawing according to statistical requirements, writing a table order, and typesetting with articles. Arabic numerals are generally used in tables, and the upper and lower digits are aligned; The data must be accurate. Statistical processing needs statistical software, version, specific statistical methods, test level, statistics of P values of various observation (detection) indicators and specific values (e.g. t=0.496, χ2=4.6 1 1, F=6.765, P=0.027, etc.). ).
4 Other explanations 1 Medical terms are subject to the medical terms published by the National Committee for the Examination and Approval of Natural Science Terms published by Science Press, and the English-Chinese Medical Vocabulary compiled by People's Health Publishing House is subject to the unpublished ones. The name of traditional Chinese medicine should be the legal drug in the Pharmacopoeia 2005 or the Glossary of Drug Names (Non-legal Drugs) edited by the Pharmacopoeia Committee of the Ministry of Health, and the international drug name should be used in English, not the trade name. 2 Abbreviations Except common abbreviations (such as ACTH, DNA, HBsAg), when other 1 times appear, all Chinese nouns should be written first and then the English full names and abbreviations should be marked in brackets. When quoting China's name in this article, the full name should be written. Units of measurement shall strictly implement the State Council's "Order on Implementing Legal Units of Measurement in China" and fully implement the provisions of the national standard GB 3 100 ~ 3 102-93 "Quantities and Units", and the names and symbols of quantities and units shall be correctly used and written in the manuscript. Where there are unit symbols, symbols should be used, such as "year" written as "A", "day" written as "D", "hour" written as "H" and "minute" written as "S". All unit symbols should use regular letters. Choose an appropriate prefix so that the magnitude range is 0. 1 ~ 1 000. The numerator and denominator cannot use the prefix at the same time. For example, "5 μg/mL" should be changed to "5 mg/L". The percentage concentration is an illegal measurement unit, such as "5% H2SO4" is inaccurate; if it refers to the mass ratio, it can be expressed as "the mass fraction of H2SO4 is 0.05" or "the mass fraction of H2SO4 is 5%"; if it refers to the volume ratio, it can be written as "the volume fraction of H2SO4 is 0.05" or "the volume fraction of H2SO4 is 5%"; If it is mass concentration, it should be written as "50 g/L H2SO4".
The symbol of quantity is expressed in italics Latin or Greek letters (pH is positive), such as: m (mass), t (time), λ (wavelength), etc. In order to express different limit conditions, the quantity symbol can be marked with the lower corner, such as the quantity concentration c(B) of substance B, the mass concentration ρ(B) of substance B, etc. Unit symbols are always represented by orthographic Latin or Greek letters, such as kg (kilogram) and m (meter). The standard form of "quantity/unit" should be adopted when expressing the quantity and unit in the chart, that is, the quantity symbol is written as a numerator and the unit symbol is written as a denominator. Such as "t/h" (time unit "hours"), "p/kPa" (pressure unit "kilopascals") and so on. The content of substances in human body with known relative molecular mass is expressed in units of substance quantity and concentration; Components whose relative molecular weights have not been accurately measured, such as some protein, can still be expressed in mass concentration units. Regardless of the quantity concentration or mass concentration used, L (liter) is generally used as the denominator of the reference unit of human test component concentration. When the diagonal in the combined unit symbol is more than 1, it should be expressed as a negative power. For example, "mg kg- 1d- 1" cannot be written as "mg kg/d" or "mg/kg/d-1". The unit after each value with length unit cannot be omitted. For example, 40 mm×20 mm×30 mm cannot be written as 40×20×30 mm, nor can it be written as 40×20×30 mm3. 4 Numerals Usage Arabic numerals should be used wherever they can be used properly. The rounding rule cannot be used to correct the numerical value, but it should be "4 to 6, after 5, after 5, there are numbers up, after 5, the number on the left is zero, and the number on the left is odd to even, so discard it". Representation of numerical range: 5 to 10 should be 5 to10; 50,000 to 6,543.8+million should be 50,000 to 6,543.8+million, and cannot be written as 50,000 to 6,543.8+million; 3× 109 to 5× 109 should be 3× 109 ~ 5× 109, or (3 ~ 5) × 109, which cannot be written as 3 ~ 5×/kloc-0. 60% to 70% should be 60% ~ 70%, not 60 ~ 70%. The average and standard deviation expressed as a percentage should be written as (50.2 0.6)%, not 50.2 0.6% or 50.2 0.6%. Semicolons of fractions are indicated by diagonal lines, except for mathematical formulas.
5 manuscript processing 1 After the contributor logs into the manuscript review system of this journal, he submits the Word document. The author can log in to our website at any time with his user name and password to understand the process of manuscript processing. If there is still no result after 2 months, you can contact the editorial department by phone or email.
At the same time, it is necessary to pay the manuscript processing fee 30 yuan and submit a letter of introduction from the unit (the letter of introduction should not only prove the authenticity of the manuscript content, but also prove that the manuscript has not submitted more than one manuscript, does not involve confidentiality issues, and the signature is uncontroversial. ).
Please submit your manuscript in the typesetting format of Journal of Zhengzhou University (Medical Edition) (which can be downloaded from the author's garden on the home page: the manuscript is typeset on A4 paper with 1.5 times line spacing; Words and drawings, tables, photos, etc. Is required). Please express the chart in Chinese. Foreign letters and symbols must be italicized and case-sensitive; The positions of letters, numbers or symbols used for superscript or subscript should be clearly distinguished. 2 manuscript revision This magazine has the right to revise the manuscript. If you don't agree to the modification, please make a statement in advance. The author can log on to the website at any time to check the status of the manuscript. The manuscript can be submitted to the author for revision in the process of editing preliminary examination, expert review and editing review. The author should carefully revise according to the opinions given by the editor, and at the same time draw up the revision instructions. The revision instructions should be answered one by one by the editor. If the author has different opinions, he should explain the reasons. After revision, the author will send the revised draft and instructions to the system. 3 manuscript processing flow ① the first review of editing is heavy. (2) 2 ~ 3 experts for examination and approval; Edit and summarize the opinions and submit them to the author for revision. (3) After careful revision according to experts' opinions, the author submits the first draft of the monograph to the final draft meeting (collective deliberation of the Standing Committee) for deliberation. The editorial summary will be submitted to the author for editing and typesetting. Other manuscripts are submitted to the chief editor for approval. (4) After the revision, the author typesets according to the final format of the revised manuscript of this journal, and submits it to the chief editor for signature after editing and processing. ⑤ Check the duplicate, consult the references and revise the English abstract before employment. ⑥ Responsible editor completes the manuscript, and the author proofreads the proof. ⑦ Release.
Any problems found in the above process can be raised by the editor-in-chief and suggested to be rejected. Once the editor-in-chief specifies the publication date of the intellectual property manuscript, this magazine will send the manuscript admission notice to the author. Before that, please don't send the manuscript to other places. Since the date of submission, the editorial department has not received the notice of manuscript handling for more than 90 days. The author can change the journal after seeking the opinions of this journal and agreeing.
If we find that the author is suspected of submitting more than one manuscript and publishing it repeatedly, we will deal with it according to the procedures and requirements of our Statement on Handling Problems of Submitting More than one manuscript and publishing it repeatedly (see the author's garden on the home page).
This journal has been compiled into Wanfang Data Resource System, China Journal Network and China Academic Journal (CD-ROM version). Once the author's manuscript is hired, it will be collected by Wanfang Data Resource System, China Journal Network, China Academic Journal (CD-ROM version) and other full-text databases. If the author does not agree to be included, please state it when submitting the manuscript, otherwise it will be regarded as agreeing to be included. Address: Editorial Department of Journal of Zhengzhou University (Medical Edition), No.40 Daxue Road, Zhengzhou City, Henan Province, with the postal code of 450052.