When I am in bunk bed, I usually set mosquito net poles on the bed above. The height of mosquito net poles is generally around 1. 1 m, and the mosquito net poles are steel pipes with a diameter of 50 mm ... The bed board thickness of dormitory beds is usually around 1.5-2cm. The entrance and exit beds in student dormitories are generally set according to the standards of adult beds.
This kind of bed is generally made of iron, which is more common in high school dormitories or university dormitories with 6-8 people. Made of 1~2 cm thick thick iron pipe or 1 cm thick iron bar, its disadvantages are easy to rust and narrow space.
The four columns of the bed body are made of 38mm×38mm round tubes, and the escalators, headrests, crosspieces and guardrails are made of 25mm×25mm square tubes. The wall thickness of square steel tubes for columns, escalators and headboards 1.0mm, and the wall thickness of square steel tubes for crosspieces and guardrails1.0 mm. ..
How to make the bed?
1. safety selection: all expansion joints can be tightened, bolts or other guardrails are close to the bed, and the distance between the bedstead and the bottom of the guardrail is not more than 89 mm. Corner guardrail, extending at least 127mm above the mattress surface to prevent children from rolling. You should also buy guardrails on both sides just in case.
2, material selection: bunk beds suggest buying pine bunk beds, which have high cost performance and relatively high environmental protection coefficient.
3, color choice: bunk beds with too bright colors will affect mental health for a long time, so be sure to choose elegant and stable colors. Don't put storage cabinets under the bed. Lockers are a huge source of pollution.