1. Shanghai's comprehensive universities and universities of science and engineering all recruit on-the-job postgraduate students in engineering. You can log on to the postgraduate enrollment website of the relevant university for enquiries.

2. Shanghai's comprehensive universities and universities of science and engineering are:

Fudan University

Tongji University

Shanghai Jiao Tong University

East China University Of Science and Technology

University of Shanghai for Science and Technology

Shanghai Maritime University

Donghua University

Shanghai electric power university

University of Shanghai for Science and Technology

Shanghai University

Shanghai University Of Engineering Science

Shanghai Dianji University

shanghai second polytechnic university

Which college you apply for depends on your interest and professional level.

4. In 2008, the on-the-job staff of University of Shanghai for Science and Technology studied for the master's degree in engineering.

I. Application conditions

On-the-job engineering technology or engineering management personnel who meet one of the following conditions, or teachers who are engaged in engineering technology and engineering management teaching in schools, can apply for the exam:

Before 1, July 3, 20051,bachelor degree.

2. Before July 3, 20041,he obtained a series of undergraduate degrees in national education.

Candidates who apply for control engineering and computer technology are not limited by the number of years. Those who fail to meet the requirements of the above-mentioned number of years before entering school and are admitted as master of engineering need to complete the postgraduate course and engage in engineering practice for more than two years, and complete the thesis (design) in combination with the engineering tasks before they can defend their master's thesis (design).

Second, the registration method

The first stage: online registration.

All applicants must log on to the designated website through the Internet and fill in and submit the registration information within the online reporting time specified by the relevant examination institutions in the examination area.

Candidates in Shanghai test area must log on to the "Shanghai Recruitment Hotline" (/) from July 1 day to July 16 for online registration.

The second stage: on-site registration

Candidates who successfully complete online registration must also bring their original ID card, graduation certificate and bachelor's degree certificate to the registration point designated by the examination organ in the relevant examination area for on-site qualification verification, payment of registration fee, on-site image collection and confirmation of online registration information, and print the qualification examination form on the spot, which will be signed by the candidates themselves. Candidates are required to submit the qualification examination form printed at the time of on-site registration to the personnel department (or archives management department, the same below) of their unit, review the contents in the form, fill in the recommendation opinions, affix the official seal on the electronic photos, and then send a copy of the qualification examination form and a copy of their ID card, graduation certificate and bachelor's degree certificate to the scientific research enrollment office of Shanghai University for preliminary examination. In the re-examination stage, the University of Shanghai for Science and Technology Admissions Office will re-examine the original certificate.

In principle, the on-site confirmation time is arranged from July 18 to July 2 1 day, 2008, and the specific on-site confirmation time is determined by the academic degree committee offices of all provinces (autonomous regions and municipalities directly under the Central Government) according to the conditions of this examination area.

On-site confirmation time and place in Shanghai test area

Siping road 1239, Tongji University, the first floor of Rui 'an Building (Graduate School) will be handled as usual from July 18 to July 2 1 Saturday and Sunday from 8: 00 to 16: 00.

Dew Hall of Haoran Science and Technology Building, Huashan Road 1954, Shanghai Jiaotong University

Attached Building of Auditorium, No.369, Zhongshan North 1st Road, Shanghai University of Finance and Economics

Special considerations for registration:

1. When applying for the Master of Engineering in our university, please be sure to indicate the code of the department you are applying for in the remarks field 1. For example, the code of the department of Power College is "00 1", and the name of the professional basic course that our university organizes the examination is indicated in the remarks field 2. Otherwise, you can't take the professional basic course exam organized by our school normally, and the responsibility is borne by the candidates themselves.

Candidates must remember the number of the online newspaper!

3. The registration information filled in by candidates during online registration must be completely consistent with the registration information filled in the qualification examination form, otherwise the online registration information shall prevail.

4. Applicants should register online and on-site within the prescribed time limit, and will not be processed after the deadline. If you only register online and do not go through the relevant procedures such as taking photos at the designated on-site registration point, this registration will be invalid.

5. On-site qualification verification and image acquisition must be handled by the candidates themselves, and no agent may be entrusted.

Third, the examination methods and subjects

Engineering graduate students take two-stage exams.

The first stage: all candidates take the national postgraduate entrance examination (English name is Graduate Candidate Test, abbreviated as "GCT").

Postgraduate Entrance Qualification Examination (GCT) is organized by the state, which mainly tests the comprehensive quality of candidates. Examination time: 65438+20081October 26th. Candidates' "GCT" scores are valid for two years. The GCT test paper consists of four parts: language expression ability test, mathematical basic ability test, logical reasoning ability test and English application ability test (candidates applying for foreign languages in our school must choose English). The full mark of GCT paper is 400, and each part accounts for 100. The test papers all adopt objective multiple-choice questions, including reading comprehension, analysis and judgment, right and wrong discrimination, scenario analysis, mathematical problem solving, logical reasoning and so on. The examination time is 3 hours, and each part is 45 minutes.

The second stage: the professional basic course examination and comprehensive interview organized by our school. The examination time of professional basic courses is 2 hours, with a full score of 100. Please refer to the subjects of the 2008 Shanghai University of Science and Technology Master of Engineering Examination. The professional basic course exam will be held after GCT exam. Please pay attention to the news published on our graduate department homepage () for the specific time and place of the exam. All candidates who take the second-stage examination are required to fill in the Registration Form of Candidates for the Second-stage Examination for Postgraduates in 2008.

Four. Admission principle

Our school independently determines the retest score line according to the GCT test scores of candidates. The comprehensive interview is organized by the applicant department, mainly in the form of interview (individual departments can add written examination), and the comprehensive interview score is 100, which is included in the total score. Total score = "GCT" total score+professional basic course examination results independently organized by our school+comprehensive interview results. Each admissions department selects the best candidates according to the total score.

Those who fail the comprehensive interview will not be admitted!

Candidates with strong business ability, outstanding work performance and outstanding scientific research achievements will be given priority under the same conditions after being audited by the admissions leading group.

Verb (abbreviation for verb) training and degree awarding

The training mode of master of engineering is entrusted training. Sign an entrustment training agreement after admission, and do not change the household registration and personnel relationship during the study period. The salary, welfare and medical expenses during the study period shall be borne by the unit where the engineering master graduate students work. The training fee is 25,000 yuan (the training fee for off-campus teaching points run by the Group shall be determined separately). The training fee is charged according to the academic year (6.5438+0.00 million yuan for the first two years and 500,000 yuan for the third year) or paid in one lump sum.

Master of engineering students should be jointly trained by schools and enterprises. Each graduate student should have two tutors with senior titles to jointly guide the thesis work, one from the enterprise and the other from the school. On-the-job students studying for a master's degree in engineering can apply for thesis defense organized by University of Shanghai for Science and Technology after completing the study period and completing the credits specified in the training program. The thesis defense meets other relevant requirements, and it can be awarded a master's degree in engineering after being reviewed and approved by academic degree evaluation committee of University of Shanghai for Science and Technology. It usually takes three years to complete the study and thesis work of the whole master of engineering course.

6. The criteria and admission principles for candidates to apply for the professional basic course examination and comprehensive interview in our school with the GCT scores of the previous year.

1. Application criteria:

(1) Candidates with a total GCT score of not less than 200 and a single subject score of not less than 30 in 2007 have a bachelor's degree;

(2) Candidates who have not been admitted to the school in 2007 or who have been admitted but dropped out of school (such candidates need to provide the withdrawal certificate issued by the Admissions Office of the school in 2007).

Candidates who meet the above conditions do not need to register and take photos online. They only need to bring their ID card, diploma, original and photocopy of degree certificate and GCT registration certificate in 2007, fill it out, paste my recent two-inch bareheaded photo, stamp the official seal on the photo of the candidate's unit, and review and confirm the contents. The Qualification Examination Form for On-the-job Postgraduates in 2008 passed the examination of our school in 2007. The specific application time and place will be announced on the homepage of our hospital in graduate department () in early July. Candidates who provide false certification materials or conceal the real situation during the application process will not be accepted normally in the end, and the responsibility will be borne by the candidates themselves.

2. Admission principles:

Candidates who apply to our school for exemption from the 2008 GCT exam with their GCT scores in 2007 also need to take the 2008 professional basic course exam and comprehensive interview organized by our school. Finally, the admissions department will select the best candidates according to their total scores (including GCT scores, professional basic course test scores and comprehensive interview results). Those who fail the comprehensive interview will not be admitted.

Such candidates are not allowed to apply for other schools at the same time, otherwise, no matter what stage of enrollment, our school will not admit them.

Seven. Consultation and contact information

University of Shanghai for Science and Technology graduate department Degree Office

Address: Room 208, Graduate Building, No.516, Simon Road, Shanghai 200093.

Tel: (021) 55271841,5527252 1

Fax: (02 1)55272089

Home page:/

University of Shanghai for Science and Technology enrolls Master of Engineering and the names of its departments.

Domain name code: 430 102

Name of field: mechanical engineering

Number of places: unlimited.

Code and Name of Admissions Department: 005 School of Mechanical Engineering

Note: 1. The code of professional degree of master of engineering is 430100;

2. According to the engineering field names and codes published by the State Council Academic Degree Office No.36 [2005].

University of Shanghai for Science and Technology 2008 Engineering Master Degree Postgraduate Examination Subjects

College: School of Mechanical Engineering

Name and code of engineering field: Mechanical Engineering 430 102

Professional examination subjects (choose one):

Fundamentals of mechanical engineering control

Structural design

Professional reference book: Fundamentals of Mechanical Engineering Control, edited by Zhu Jibei, Machinery Industry Press.

Fundamentals of Mechanical Engineering Control (4th Edition), Huazhong University of Science and Technology Press, 2002.

Mechanical Design (4th Edition), Qiu Xuanhuai et al., Higher Education Press, 1997.