Excellent model of rectification report 1

I. Existing Problems and Shortcomings

study

Don't hold on to your study too tightly and be content with generalizations. I think that what I usually learn can be satisfied with a certain foundation, so I relax and ignore learning, which leads to passive coping with learning and lack of consciousness and initiative in learning. In the work, the cultivation and further improvement of knowledge and ability are neglected, knowledge is not systematic and comprehensive, and when it is used, it is also cramming, learning has not been adhered to for a long time, especially the combination with practice is not enough, and practical problems are rarely solved.

(2) work.

1, lack of initiative in work, waiting and dependence. I always think that I just need to do my job well. I always do what the leaders arrange in my work, step by step, based only on doing my own work, and I don't pursue doing new things diligently. There is no big and obvious innovation feature.

2. Work attitude

First, the work standard is not high, and the self-requirements in the work are not strict enough. Although I have made continuous efforts in my work, I have accomplished my tasks well, and I have also shown my knowledge and enthusiasm in my work, but there are also phenomena of being lax in my requirements. Sometimes I'm lazy, content with doing my job well, and don't pay attention to thinking about the overall situation of my work. Second, the pioneering spirit is not strong and the thinking is not open enough. I am content with the status quo in my work, I can't let go of my hands and feet in my work, and I'm not bold enough. I'm satisfied with doing my job and completing the task according to the requirements of the leaders. I lack creative and original ideas, have the idea of waiting and relying, and always passively accept the work arranged by the leaders. I don't have many ideas and methods on how to creatively carry out my work, and I can't take the initiative to share my worries for the leaders. Third, sometimes things are not rigorous enough, there is no idea of Excellence, and there is no spirit of Excellence in completing a job. Although the work was completed, the target was completed on time, indicating that the quality was not high.

3. Work style

First, it is not solid enough, and there is an anxious mentality. When receiving a task, sometimes the first thing that comes to mind is how to finish it as soon as possible, not how to do the best, and sometimes there are ideas to deal with it in order to pass the test.

Second, the service attitude is sometimes not very good. Sometimes when the work is busy, many people come to handle affairs. At first, they can treat customers calmly. In the end, you will be impatient and impatient, which will affect the work effect. They are not always strict with themselves with high standards, and their working methods are simple, which leads to poor work results.

Third, they are afraid of offending people, and sometimes they don't pay attention to strategy.

4. Work discipline

The daily management is not strict enough. Generally speaking, I can still abide by various rules and regulations, but sometimes I don't pay enough attention to daily discipline, sometimes the implementation system is not strict enough, and occasionally I am late and leave early. Although it does not affect the completion of the work on time, it still violates organizational discipline.

Second, the root of the problem

First, I relaxed my study and requirements for myself, and didn't fully realize the importance of learning from the depths of my mind. No long-term concept, no long-term study and continuous improvement of their working ability as the goal.

Second, there is no scientific and rigorous work attitude and bold and innovative style. I have the emotional requirements of equality, laziness and dependence, relaxed the discipline in the section, and did not systematically plan and sort out my work.

Third, the rectification measures

1, and strive to improve the learning consciousness. First of all, consciously study, strengthen the self-restraint mechanism in learning, self-pressure, strengthen learning, study hard theory, study politics, financial regulations and the party's new principles and policies, strictly demand ourselves and others, and learn to keep pace with the times.

2. Further improve the work style. We should strive to be good at overcoming all kinds of constraints brought about by negative thinking and vague understanding, get rid of impatience, face difficulties and work actively; Dare to break through the shackles of traditional ideas, not stick to the rules, not content with the status quo, and work creatively. Be good at thinking rationally about the problems encountered, constantly sum up and improve the existing experience in practice, and put forward new development ideas and plans in view of the new situations and problems faced in the current work; Good at understanding things from a global perspective; Be good at constantly improving and improving yourself according to personal specific circumstances and work characteristics, and devote yourself to work in a down-to-earth manner.

3. Strengthen responsibility and improve efficiency. Pay more attention to your own work, use more brains, and plan the things assigned by the leaders and what I do, so as to complete them in an orderly, time-consuming and step-by-step manner. Today's work will never be put off until tomorrow, and a strong view of time, efficiency and quality will be established to promote the smooth development of all work and the continuous improvement of one's own ability.

Excellent model essay on rectification report II

School fire safety is directly related to the life and property safety of teachers and students, the healthy growth of students, campus harmony and the happiness of thousands of families. According to the requirements of the relevant documents of the higher authorities, our school has conducted a serious investigation on campus fire safety a few days ago, and now the self-inspection situation is reported as follows.

First, the implementation of fire safety

(a), the implementation of the safety responsibility system. The school has formulated the fire safety responsibility system and the fire safety responsibilities of each post, defined the safety responsibilities and safety responsible persons of each department, and signed a fire safety responsibility letter, which is strictly implemented in accordance with the requirements of the responsibility system and the responsibility form.

(2) The school has formulated a fire emergency evacuation plan, and regularly organizes teachers and students to conduct fire drills.

(three) in accordance with the relevant provisions of the state configuration of fire fighting equipment. Fire fighting equipment has been regularly overhauled, and there is no damage or unavailability.

(4), fire evacuation routes, safety exits.

(5) The school regularly conducts fire education and training for teachers and students, and organizes fire knowledge publicity activities.

(6) The school has monthly safety work meetings and safety inspection records. The school fire safety self-inspection report, through self-inspection and self-correction, enables the majority of teaching staff to further recognize their important responsibilities, enhance their sense of urgency, take the initiative to implement safety work, and fully safeguard the school's safety and stability.

Second, the problems found in the inspection

The results of this inspection show that the indoor fire hose is aging and damaged, the number of fire extinguishers is insufficient, the evacuation indication sign is unclear, and the emergency lighting is partially damaged.

Three. initiative

1 We rectified the problems found in this inspection, reported the fire extinguishers and fire hoses to the higher authorities in time, and supplemented and repaired the emergency lights.

We held a student safety education meeting to ask the teachers and students in the class to know the importance of fire safety.

3. Strengthen the system of safety directors, and require the safety directors to attach great importance to it and carry out regular safety inspections. "Hidden dangers are better than open flames, and responsibilities are heavier than Mount Tai".

Fire safety work is a constant and unremitting work. We will continue to work hard and do a good job in the special rectification of fire safety in line with the service tenet of "all for students, all for students, all for students".

Excellent model essay of rectification report 3

Excellent doctors should not only abide by medical technical specifications, but also abide by laws and regulations. To form a correct world outlook and value orientation, we should stand at a higher level, look at the relationship between man and nature from a long-term perspective, and handle the relationship between good people and people. At the same time, while doing a good job in medical business and technology, we will contribute to the prevention and health care of the people.

To be an excellent doctor, we must first deeply analyze ourselves and recognize our own shortcomings. I have been a urologist for 10 years. Although I have made the necessary achievements, I have read medical secondary schools, junior colleges and undergraduate courses in succession. Although I have obtained the qualification certificate of medical practitioner through hard work and my business skills have been greatly improved, I think my study is not systematic, comprehensive and in-depth. Theoretical study and concrete practice can not be well combined; I sometimes appear impatient when there are many patients, and occasionally impetuous when there are few patients. After repeatedly looking for the reasons for my own shortcomings, I want to make rectification and improvement from the following aspects.

First, we should have noble medical ethics.

Morality is the first place in group education, the basic moral character of being a man, and the standard of distinguishing right from wrong. Medical ethics should be regarded as the code of conduct and self-discipline of clinicians. Medical ethics requires doctors to have a kind heart. A benevolent doctor who loves others and helps others must serve patients sincerely and kindly. Only kindness can win the love and dependence of patients, establish a deep friendship with patients, and will inevitably increase the therapeutic effect. In today's wave of commodity economy, a few doctors mistakenly regard money as everything, regard lofty medical career as business relationship, and lack emotional communication with patients. Once the therapeutic effect is not dreamy or unexpected, medical disputes will often be caused by misunderstanding. Doctors with good medical ethics can correctly handle the relationship between doctors and patients, thus avoiding some things and greatly reducing the incidence of medical disputes.

The most important thing is to have a high sense of responsibility, a high sense of responsibility, patience and meticulous work attitude, which is also very important. Modesty and prudence, neither arrogance nor rashness are also necessary. Respecting teachers and attaching importance to morality is a virtue that young doctors must possess. As a young doctor, I should respect senior doctors in business, teaching and scientific research to get their love and education. I should be humble to my colleagues in all related disciplines and learn from them what is beneficial to business development.

Second, we must have a solid theory and superb technology.

Medical skill is the ability to serve patients. To serve patients well, we must have excellent technology, rich clinical experience and training skills. Only through long-term clinical practice can we gain true knowledge! Practice should start from the basics, all operations should be trained and mastered, and the operation process should be skilled and standardized. Only after training and mastering the basic skills can we be handy in various operations. In the process of learning, we should combine theory with practice, and neither can be improved. You also need to master some basic research methods, such as the format of writing papers, the method of collecting data, and participating in scientific experimental research in person, which will play a very good role in improving yourself and eventually becoming a qualified doctor.

Third, in all kinds of clinical activities, we should be diligent in thinking, good at summing up and sensitive to emergencies.

In clinical medical activities, we should not only have a calm mind and psychological preparation, but also have material preparation to ensure accurate and proper treatment and not delay precious treatment opportunities. We should pay more attention to the analysis and experience afterwards, which is a rare wealth to guide clinical work, even if it is a disease that is difficult to see in books. For every emergency, we should discuss it carefully and repeatedly with theory. ...

Fourth, be enterprising and have good interpersonal relationships.

If you want to be a famous doctor, you must realize the importance of self-orientation. However, the premise of all this is, first of all, dedication and good interpersonal relationship, which is also an indispensable part of treating diseases.

The fifth is to establish a correct style of study and create an atmosphere of lifelong learning.

Reading periodicals regularly requires perseverance and good use of modern science and technology. If there are many medical resources on the Internet and you can use computers flexibly, you can find the information you need in a short time, which can enhance the pertinence of learning and improve learning efficiency.

Noble medical ethics warms people's hearts by refusing to accept patients' red envelopes. As a medical worker, only by strengthening the construction of medical ethics, carrying forward noble medical ethics and inheriting and carrying forward the professional ethics of "doctors' kindness" can we change patients' wrong understanding of the "hidden rules" of accepting red envelopes in hospitals and guide the doctor-patient relationship to develop in a healthy and harmonious direction. Here, we have to learn from many doctors, such as Director xx, Director xx, Director xx and Director xxx, who have repeatedly refused to accept patients' red envelopes. The hospital has become so harmonious under the good atmosphere brought by a group of doctors with noble medical ethics. They are all references for my study.

Six, to further improve the clinical medical level.

We should strive for perfection in technology. Medical knowledge is constantly updated and developed, and human diseases are constantly changing. There will always be unknown areas in medicine. We should all study medicine with an open mind and spirit, and advocate "evidence-based medicine" that treats diseases with patients as the center rather than personal preferences and habits. "Evidence-based medicine", also known as empirical medicine, is also a course I am currently studying in the undergraduate class of xx Medical University. It means to guide the treatment of each patient purposefully and correctly with the best scientific basis available. This requires us to be happy and good at reading while doing a lot of solid clinical and scientific research practice, so as to become qualified clinicians in the new century.

At the same time, as a member of xx Hospital, I love xx Hospital very much, and sincerely hope that xx Hospital can develop rapidly and stably to become the ace hospital in xx City.

Excellent model essay of rectification report 4

I. Work that has been completed

1, strictly require the construction unit to handle affairs according to the basic construction procedures, and make records of commencement report, construction scheme, technical disclosure, blue prints.the design, equipment inspection and inspection.

2, check the project construction unit must be in strict accordance with the construction procedures and construction technology discipline organization construction.

3. Check the working condition and safe operation of the construction machinery entering the site to ensure the continuity of the project construction.

4. Strictly control the engineering construction quality.

4. 1 equipment engineering:

4. 1. 1 Before installing the dynamic and static equipment of the device, the construction unit shall conduct self-inspection on the equipment entering the site in strict accordance with the design and specification requirements, and report it to the owner and supervisor for verification. Through unpacking inspection, it is found that the equipment certificate and self-inspection documents are complete. After inspection, the equipment can be installed in the site. Foundation acceptance, and have a complete record, equipment installation shim concealed engineering qualified, secondary grouting inspection qualified, and have a complete record. The overall installation of key power equipment should be carried out under the guidance of experts, and the installation of power equipment and the alignment inspection of coupling should be approved by the owner.

4. 1.2 The installation elevation, coordinates and verticality of the equipment are all within the allowable deviation values of the design and specifications, and the telescopic end of the equipment shall be adjusted according to the requirements of the drawings, designs and specifications; Parallelism and coaxiality of equipment and pipeline connecting flanges in free state meet the requirements of design and specification, and the construction records are complete.

4. 1.3 The equipment test shall be carried out according to the scheme approved by the owner. The hydrostatic test was carried out under the design pressure of 1.5 times, and the process met the requirements of the specification. The pressure test of stainless steel equipment shows that the chloride ion content of water quality is less than 25ppm, which meets the requirements of the specification. After passing the pressure test, the residual water will be discharged and purged with compressed air. Before the equipment is closed, the construction party will clean up the interior and submit it for inspection according to the procedure. After inspection by the owner and the supervisor, it will be closed if it is qualified.

4.2 Pipeline Works:

4.2. 1 Pipes and pipe fittings shall be inspected before construction, and the quality certificate documents are complete and the materials are qualified.

4.2.2 In the process of pipeline construction, effective quality supervision and control are carried out on the construction quality of engineering construction projects by means of patrol, standing by, data review and spot check. The weld defect rating of pipeline welded joint after nondestructive testing conforms to JB4730, and the quality improvement report is the work report. The detection percentage is not less than 20%, and the qualified level is Grade II. The percentage of X-ray detection of fixed joints shall be not less than 40% and not less than one. Unqualified welds should be rectified and re-pasted before entering the next process. According to the requirements of the owner, the air pressure test was carried out on the pipeline, and all the air pressure tests were qualified. Purge the pipeline for 48 hours until it meets the requirements.

4.2.3 The first pass rate of pipeline welding is more than 96%, which meets the project quality management objectives.

4.2.4 Rock wool insulation layer and 0.7mm Al-Zn-Fe sheet protective layer are used for anticorrosion and thermal insulation of equipment and pipelines. Insulation layer is dense, staggered joints on the same floor, expansion joints are reserved correctly, and the deviation meets the design requirements and specifications. The pressure head and lap construction of protective layer are correct, without local shelling, local unevenness and irregular surface exceeding the standard. Equipment anticorrosion and thermal insulation engineering construction records are complete.

4.3 Electrical Engineering:

The electrical cabinet and cable quality certificates are complete and qualified; The electrical test is qualified, the test record is complete, the power transmission and power reception schemes are complete and qualified, and the regional substation and the device substation are qualified for power transmission at one time.

4.4 Instrument Engineering:

The quality certification documents are complete, and the instrument panel cabinets and instruments and equipment have passed the factory acceptance; The instrument system has passed the joint debugging.

5. Control the qualification of labor organization and workers on the construction site, and put an end to the phenomenon of unlicensed mount guard.

6. Require the construction unit to establish and improve the emergency duty system and emergency measures, and the personnel on duty shall ensure the smooth communication for 24 hours, and handle the problems in time when found.

Second, the existing problems and rectification

1, equipment engineering:

1. 1 A few heat exchangers leaked during hydrostatic test, which was mainly caused by loose flange bolts. All of them were handled by the construction unit on site and passed the pressure test again.

1.2 When conducting parallel inspection on the materials of the internals of the absorption tower, it was found that the materials of two flanges were not in conformity with the design, and the construction unit was required to replace them.

When the concentricity of 1.3 fan was accurately found, the motor center was measured to be 0.8㎜ higher than the fan, and the owner was requested to inform the manufacturer to process the rectification framework.

When accurately finding the concentricity of 1.4 vacuum pump, use carbon steel gasket. Because carbon steel is easy to rust, which affects the installation quality and long-term operation of equipment, it is required to replace it with stainless steel gasket. The construction unit has completed the rectification as required.

1.5 Some pumps have problems such as shaft string and oil leakage during single-machine debugging, and the owner has informed the manufacturer to come to the site to deal with them and conduct single-machine debugging again.

2, pipeline engineering

2. 1 pipeline LN 1 102-20-M2B During the pressure test, when the pressure rose to 0.8Mpa (the design pressure was 0.4Mpa), the base material of the pipeline leaked in two places. Upon inspection, it was found that there were two cracks, the lengths of which were 8㎜ and 15㎜ respectively. The pipeline is 20 steel pipes of DN20. The owner has contacted the manufacturer to find out the cause of the problem, and inspected the pipes with the same manufacturer, specification and material in the device.

2.2 The connecting pipeline between deacidification furnaces adopts single-spring bracket, which is inconsistent with the double-spring bracket required by the design, and the construction unit has been required to rectify.

2.3 There is a section of weld SC1104-20-M2 B-H1,and the dislocation of the inner wall reaches 7-8㎜, which seriously exceeds the standard. Therefore, the construction unit is required to rectify the incision and carry out nondestructive testing.

3, electrical engineering

3. 1 The supervisor found that there was water leakage in the 10 set of flameproof fluorescent lamps in the device. After investigation, the reason is that there is no waterproof apron on the side cover of the fluorescent lamp, and the thickness of the waterproof apron for threading does not match the length of the locking bolt reasonably, which belongs to the product design problem and requires the owner to replace it all.

3.2 The supervisor conducted a comprehensive inspection on the electrical grounding of the device, and found that most of the grounding connection points were not derusted and coated with conductive paste, and the owner has been required to rectify them all.

4, instrument engineering

4. 1 The supervision engineer found that the installation of cable tray entering the instrument control room did not meet the specification requirements, and asked the construction unit to rectify it.

4.2 The supervision engineer found that the arrival models of some cables did not meet the design requirements and asked the owner to replace them.

Summary: The equipment installation project has passed the supervision acceptance and made quality evaluation. The quality control materials are basically complete, the construction meets the design and specification requirements, and there is no violation of mandatory standards.

Excellent model essay on rectification report 5

The phrase "education is like a window in a mirror" truly reflects that educational practice is like a window in a mirror, and personal moral self-examination and rectification report. Educators are required to always wipe the "mirror of quality" and often try the "window of supervision"; It is necessary to show the "mirror of charm" and skillfully open the "window of personality"; Open the "mirror of charm" and "window of life" more often. Because education can only get twice the result with half the effort if it is like a "mirror" or a "window". To this end, I conducted a self-examination and rectification of my work in combination with the learning activities of teachers' morality and style. The self-inspection and rectification report is as follows:

First, teaching according to law.

As a teacher, I always fully implement the Party's educational principles and policies, adhere to the Four Cardinal Principles, and be loyal to the educational cause of the Party and the people. Always bear in mind the sacred duty of the people's teachers, love the motherland and the people, and take the development of students as their own responsibility. Earnestly perform their duties in ordinary and complicated education and teaching practice.

Second, love and respect your work.

In education and teaching, I strive to treat students with lofty professional ethics, good teaching style, strict teaching discipline, equal attitude, people-oriented, strict requirements, patient guidance, actively implement quality education, continuously improve the quality of education and teaching, and promote the all-round development of students, so as to achieve the purpose of teaching and educating people.

Third, love students.

Our education targets are all underage children, and there will inevitably be some shortcomings and mistakes in learning activities. In teaching, I always remind myself that I care about students, love them and treat them equally, and I always use "As a teacher, I always care about my students". When they have shortcomings or mistakes, I never criticize them blindly, but point out their problems from the perspective of care and love, and have a heart-to-heart conversation with them so that they can realize their mistakes from the heart and consciously correct them.

Fourth, rigorous scholarship.

Today's era is an era of knowledge economy and learning, and technology is changing with each passing day. Only by continuous learning can teachers adapt to the requirements of the times and the needs of the new educational situation. Therefore, in my work, I seriously study teaching materials and students, reflect on my teaching behavior, study my business assiduously, constantly learn new knowledge, explore the laws of education and teaching, improve teaching methods, and improve my level of education, teaching and scientific research. The goal is to become a research-oriented teacher.

Verb (abbreviation for verb) unite and cooperate.

In teaching, I can live in harmony with my colleagues, respect each other, learn from each other, be friendly and help each other, be proud of the school, be ashamed of the school, and do my part to create a civilized campus.

Sixth, respect parents.

To realize the "trinity" situation of moral education and complete the education and teaching work smoothly, we must listen to opinions and suggestions carefully, strive for parents' support and cooperation in student management, and explore feasible methods of educating children.

Seven, honest teaching

I remember Mr. Tao Xingzhi wrote in "Four Questions a Day": "All ulterior motives and misconduct are caused by dishonesty", and he also proposed "building the Great Wall of Personality". At work, I stick to noble sentiments, carry forward the spirit of dedication, and consciously resist the influence of bad social atmosphere.

Eight, be a teacher by example

Minister of Education Zhou Ji pointed out: To teach and educate people, teachers should first learn to be a model, and educators should first set an example. The characteristics of teachers' profession determine that teachers must have high quality, and teachers' morality is the most important quality and the soul of teachers. Teachers' morality determines teachers' love for students and their loyalty to the cause, as well as their persistent pursuit and noble personality. On the other hand, teachers' morality directly affects the growth of students, and teachers' ideals and beliefs, moral sentiments and personality charm directly affect the cultivation of students' ideological quality, moral quality and moral behavior habits. Noble and charming teachers' morality is a textbook and a powerful spiritual force, which has a profound, subtle and lifelong impact on students. I take "being a teacher from high school and being respected as a model" as my yardstick for continuous progress. Education is the art of regret. Therefore, in teaching practice, even if we pay sincere attention to it, constantly improve ourselves in learning and make unremitting efforts to improve ourselves, there are still some shortcomings and deficiencies.

The disadvantages of the self-study exam are as follows:

1, the study of educational theory is not deep enough, only superficial, without in-depth study of essence, which leads to a lot of confusion in the teaching process.

2. The business needs to be improved, and little is known.

It is easy to catch a cold and have a fever at work.

In view of the above shortcomings, I propose rectification and strive to:

1. Seriously study the theory of education and teaching, take an active part in learning and training activities, study hard and strive for perfection.

2. Strengthen the study of professional knowledge, consult modestly, improve teaching methods, enrich teaching quality, and improve the ability and level of education and teaching.

3, enhance the initiative and enthusiasm in charge of the work.

4. Work enthusiasm should continue.

In short, in the future work, I will take the model teacher as an example, study hard, work actively, strengthen my self-cultivation, improve the quality of education, and strive to be a teacher who serves the people and satisfies the people.